• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.469-474
• /
• 2004

We have fabricated and designed wavelength-tunable sampled grating distributed Bragg reflector laser diodes(SGDBR-LD) by using, for the first time, planar buried heterostructures(PBH). The diodes have low threshold current values and high-performance of laser operation. Growth condition using metal organic chemical vapor deposition(MOCVD) was optimized for the formation of a good butt-coupling at the interface. A maximum output power of the fabricated device was 20 mW under 200 mA continuous wave(CW) operation at $25^{\circ}C$. Average threshold current and voltage were 12 mA and 0.8 V, approximately. This output power is higher than those of ridge waveguide(RWG) and buried ridge stripe(BRS) structures by amounts of 9 mW and 13 mW, respectively. We obtained a tuning range of 44.4nm which is well matched with the target value of our design. The side mode suppression ratio of more than 35 dB was obtained for the whole tuning range. Optical output power variation was less than 5 dB, which is 4 dB smaller than that of RWG structures.

• Journal of Periodontal and Implant Science
• /
• v.50 no.4
• /
• pp.238-250
• /
• 2020

Purpose: This study aimed to evaluate the biocompatibility and the mechanical properties of ultraviolet (UV) cross-linked and biphasic calcium phosphate (BCP)-added collagen membranes and to compare the clinical results of ridge preservation to those obtained using chemically cross-linked collagen membranes. Methods: The study comprised an in vitro test and a clinical trial for membrane evaluation. BCP-added collagen membranes with UV cross-linking were prepared. In the in vitro test, scanning electron microscopy, a collagenase assay, and a tensile strength test were performed. The clinical trial involved 14 patients undergoing a ridge preservation procedure. All participants were randomly divided into the test group, which received UV cross-linked membranes (n=7), and the control group, which received chemically cross-linked membranes (n=7). BCP bone substitutes were used for both the test group and the control group. Cone-beam computed tomography (CBCT) scans were performed and alginate impressions were taken 1 week and 3 months after surgery. The casts were scanned via an optical scanner to measure the volumetric changes. The results were analyzed using the nonparametric Mann-Whitney U test. Results: The fastest degradation rate was found in the collagen membranes without the addition of BCP. The highest enzyme resistance and the highest tensile strength were found when the collagen-to-BCP ratio was 1:1. There was no significant difference in dimensional changes in the 3-dimensional modeling or CBCT scans between the test and control groups in the clinical trial (P>0.05). Conclusions: The addition of BCP and UV cross-linking improved the biocompatibility and the mechanical strength of the membranes. Within the limits of the clinical trial, the sites grafted using BCP in combination with UV cross-linked and BCP-added collagen membranes (test group) did not show any statistically significant difference in terms of dimensional change compared with the control group.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.199-207
• /
• 2008

Wavelength converting devices with a ridge-type waveguide in periodically poled $MgO:LiNbO_3$ are made and characterized. The experimental results are compared with theoretical analysis on the effects of waveguide dimension and duty ratio of the periodically poled structure. To show the relationship of the conversion efficiency to those factors, a new measurement system is configured. That experimental results show that the center wavelength, normalized conversion efficiency and full width half maximum of the conversion efficiency curve are 1067.45 nm, 90.7%/$Wcm^2$ and 0.17 nm, respectively. Also, the estimated results of the duty period and full width half maximum of the conversion efficiency from theoretical calculations agreed well with experimental results with the errors of 0.016 ${\mu}m$ and 0.01 nm.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.3
• /
• pp.56-64
• /
• 2021

Pavilion is an important landscape installation in the traditional landscaping and a representative facility that organizes space. To interpret and succeed the traditional landscape space, researches on the shape and structure of the traditional pavilion are also needed. However, researches on the style and structure of the traditional pavilion are difficult to be found. Accordingly this study aimed to identify the structural characteristics of roof part that occupied the largest portion in determining the shape of pavilion. Our research findings are as follows. As a result of analyzing 15 traditional Single-room square pavilions whose structure could be identified, it was found that the main building elements that distinguished the type of roof part in the Single-room square were crossbeam, ridge pole, and baluster. Depending on the presence of roofing members, pavilion was classified into five types: crossbeam, crossbeam+ridge pole, crossbeam+baluster, ridge pole, and baluster. In addition, as a result of analyzing the load and joint that worked on crossbeam based on the shape classification of roof part, it was found that in the traditional Single-room square pavilion, crossbeam was designed to play a balancing role between pillar and load. This study is significant in that it attempted to make a close interpretation of the shape of roof part in the pavilion and the role and function of building elements in terms of size, ratio, and load.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.706-711
• /
• 1997

Low supply of water is generally the most serious factor limiting rice production. The experiment was conducted to identify the reasonable method for minimum irrigation under ridge direct seeding on dry paddy, at National Honam Agricultural Experiment Station, RDA in 1996. The results showed that the reduction ratio of irrigation water was high in order of furrow irrigation at 15-day>furrow irrigation at 10-day>flooding irrigation at 10-day>, and furrow irrigation at 5-day intervals. However, milled rice yield was high in the furrow irrigation at 5-day intervals and in flooding irrigation at 10-day intervals due to high ripened grain as compared with other treatments indicating two treatments were the most reasonable irrigation methods in terms of saving the labor cost and water supply as well as the admittable yield performance.

• The Journal of the Korean dental association
• /
• v.22 no.11 s.186
• /
• pp.953-960
• /
• 1984

The author applied the attachment fixation overdenture on the patient whose residual alveolar ridge height was poor to increase mechanical denture retention, and observed the periodontal condition of the abutment roots after insertion of attachment fixation overdenture. The author obtained the conclusions as follows; 1. Attachment fixation overdenture showed better mechanical retention than conventional overdenture did, but it resulted unfavorable crown-root ratio. 2. Within one year after insertion, there were not significant changes in periodontal health, which was indicated by plaque index, gingival index, pocket depth, tooth mobility gingival hyperplasia and alveolar bone change. 3. Mild periodontal thickening was observed. 4. This study emphasized the importance of adequate follow-up care and home care instructions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.3
• /
• pp.427-433
• /
• 1995

The optimal condition for hydrolysis of oyster was evaluated with proteases using response surface methodology(RSM). Among 11 commerical proteases, APLTM 440 was selected as the suitable protease for producing oyster hydrolysate on the basis of cost per unit enzyme activity. The effect of autolysis on degree of hydrolysis in oyster was negligible comparing to that of APL 440 protease treatment. From RSM and ridge analysis, the conditions favoring the highest degree of hydrolysis were pH 9.95, 61.1$^{\circ}C$, 2.64 hr reaction time, 49.2% substrate, and 0.35% enzyme/substrate ratio. Oyster hydrolysate prepared under optimal conditions shwoed virtually 51.98% of hydrolysis.

• Journal of the Korean earth science society
• /
• v.44 no.4
• /
• pp.264-274
• /
• 2023

The Korea Strait comprises a continental shelf in a shallow sea that experienced glacio-eustastic sea-level changes during the Quaternary period. A long core of 76.6 m in length was acquired at the South Sea Drilling Project site (SSDP-101; 34°19.666'E and 128°16.335'N) with a 60 m water deep. The uppermost massive sand beds were interpreted as sandy sediments of the nearshore marine sand ridge in the shallow sea during the transgression of sea level, whereas the lower parts of alternating sandy and muddy beds were interpreted as deposits in marsh, estuary, and tidal flat environments. A three-layered geoacoustic model was reconstructed for the sedimentary succession in the high-resolution seismic profile based on a 140-grain size and sediment type of core SSDP-101. For the actual underwater simulation and experiments, the in-situ P-wave speeds were calculated using the sound speed ratio of the Hamilton method.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.1
• /
• pp.33-47
• /
• 2022

In this study, distribution of submarine sand ridges in the coastal waters of Korea was surveyed using multibeam echo sounder data, and the topographic characteristics of each region were identified. For this purpose, the DEM (Digital Elevation Model) data was generated using depth data obtained from the Yellow Sea and the South Sea by Korea Hydrographic and Oceanographic Agency, and then applied the TPI (Topographic Position Index) technique to precisely extract the boundary of the sand ridges. As a result, a total of 200 sand ridges distributed in the coastal waters were identified, and the characteristics of each region of the sedimentary sediments were analyzed by performing statistical analysis on the scale (width, length, perimeter, area, height) and shape (width/length ratio, height/width ratio, linear·branch type, exposure·non-exposure type). The results of this study are expected to be used not only for coastal navigational safety, but also for marine naming support, marine aggregate resource identification, and fisheries resource management.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.28-51
• /
• 2019

The purpose of this study was to analyze forest vegetation structure in Marugeum (the ridge line) area between Dakmokryeong and Daetjae in Baekdudaegan through vegetation classification, importance value, species diversity, and CCA using the data that were collected from 245 quadrates through Braun-Blanquet vegetation survey method from May to September in 2017. The results of the forest vegetation classification identified 8 vegetation units with Quercus mongolica community group at the highest level. Q. mongolica community group was classified into the Cornus controversa community, Buxus koreana community, Sasa borealis community, Abies nephrolepis community, and Q. mongolica typical community. C. controversa community was further classified into Quercus dentata group, Filipendula glaberrima group, Larix kaempferi group, and C. controversa typical group. The result of the important value analysis showed that Q. dentata had the highest importance value at 19.1% in vegetation unit 1 while Q. mongolica had the highest importance value at 22.7%, 38.3%, 25.6%, 41.3%, 27.9%, and 41.6% in vegetation unit 2, 4, 5, 6, 7, and 8, respectively, and L. kaempferi had the highest importance value at 27.6% in vegetation unit 3. As such, Q. mongolica species generally represented the communities of Marugeum (the ridge line) area of Dakmokryeong to Daetjae in Baekdudaegan. The results of species diversity showed that vegetation unit 1 and 2 were 3.305 and 3.236, respectively, which were relatively higher than other vegetation units. It was considered that this result was due to the influence of high emergence of present species. The results of the CCA analysis of the correlations between biotic environmental factors and vegetation types showed that vegetation unit 1 was mainly correlated with the megaphanerophyte ratio and vine plant ratio. In the correlations between abiotic environmental factors and vegetation types, vegetation unit 7 was significantly correlated with altitude. From the perspective of ecological management, vegetation unit 5 represented by B. koreana community was inhabited by a variety of plants due to the species composition and location environment due to the geological characteristics that are typical of limestone area. Vegetation unit 7 represented by A. nephrolepis community was typified as subalpine vegetation widely distributed by relict species and endemic species. We concluded that it is necessary to manage these vegetation units with an ecologically differentiated approach.