• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.312-319
• /
• 2001

We proposed a B-RWG LD (Buried-ridge waveguide laser diode) having more merits than a conventional RWG-LD. It's ridge width is controlled easily, it has the advantage of being more planar than the RWG-LD and it is possible to control refractive index with growth layer thickness. Before fabricating the device, we designed the optimal device for single mode, high efficiency and high power operation. From theoretical analysis, we have to control the $d_2, d_3$ layer thicknesses for lateral effective index difference, $\Delta_{nL}$ to be higher than critical value, and simultaneously consider the ridge width for single mode and low threshold current operation. As a result, it is possible to make a single mode LD having the ridge width of $6~9{\mu}m$ if the lateral effective index difference was controlled properly. perly.

• Korean Journal of Medicinal Crop Science
• /
• v.23 no.5
• /
• pp.351-356
• /
• 2015

Background : Ginseng is mainly grown as a break crop in paddy fields after rice has been cultured for approximately 4 - 5 years, because it reduces the negative effects of continuous rice cropping. However, physiological disorders, such as leaf discoloration, occur in ginseng grown in paddy fields with poor drainage and excessive levels of inorganic components. Methods and Results : This study investigated the effect of ridge height on the growth characteristics and yield of 6 year old Panax ginseng. Ridge height was varied by making 20, 30, and 40 cm high ridges in a pooly drained paddy field. Soil moisture content decreased, while electrical conductivity (EC) as the ridge height increased. The $NO_3$, K, Ca, Mg, and Na levels also rose as ridge height increased, but organic matter and $P_2O_4$ levels did not. The leaf discoloration ratio rose as the ridge height increased, and root yield reached a peak when the ridge height was 30 cm. Conclusion : A ridge height of 30 cm in poorly drained paddy field improved ginseng growth by reducing leaf discoloration and increasing root survival, owing to more suitable soil moisture and EC levels.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.339-339
• /
• 2002

In the RABiTS approach to coated conductor development, successful (both economic and technological) depends on the refinement and optimization of each of three important components: the metal tape substrate, the buffer layer(s), and the HTS layer. Here we will report on the ORNL approach and progress in each of these areas. - Most applications will require metal tapes with low magnetic hysteresis, mechanical strength, and excellent crystalline texture. Some of these requirements are competing. We report on progress in obtaining a good combination of these characteristics on metal alloys of Ni-Cr and Ni-W. - The deposition of appropriate buffer layers is a crucial step. Recently, base research has shown that the presence of a stable sulfur superstructure present on the metal surface is needed for the nucleation and epitaxial growth of vapor-deposited seed buffer layers such as YSZ, CeO$_2$ and SrTiO$_3$. We report on the details and control of this superstructure for nickel tapes, as well as recent results for Cu and Ni-13%Cr. - Processes for deposition of the HTS coating must economically provide large values of the figure-of-merit for conductors, current x length. At ORNL, we have devoted efforts to a precursor/post-annealing approach to YBCO coatings, for which the deposition and reaction steps are separate. We describe motivation for and progress toward developing this approach. - Finally, we address some issues for the implementation of coated conductors in real applications, including the need for texture control and electrical stabilization of the HTS coating.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.270-277
• /
• 2013

In this paper, we propose a wideband ridge SIW(Ridge Substrate Integrated Waveguide)-to-SIW(Substrate Integrated Waveguide) transition. The proposed transition structure is designed to acquire a wide bandwidth by inserting through via holes at the regular interval for an impedance matching and an E-field mode matching method. The measurement results show a fractional bandwidth is 29.1 % at 20 dB return loss from the center frequency(11 GHz). The maximum insertion loss is 0.49 dB from 9.21 GHz to 12.41 GHz.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.88-92
• /
• 2000

Excessive soil water in paddy field induces growth losses during the vegetative stages of soybean plants. Our objectives were to know growth responses of soybean as affected by the level of ridge heights. A field experiment was conducted at the Research Farm of Korea University near Seoul in 1996. Ten cultivars of soybean (Glycine max (L.) Merrill) were planted at the ridge heights of 10, 30, and 50cm in paddy soil on 27 June. Total dry matter accumulation at the 10cm ridge height was severely decreased until the growth stage of R5 as compared to the ridge heights of 30 and 50cm, and this decrement was mainly due to both reduced leaf and stem dry weights. However, seed dry weight was not significantly decreased at the lower ridge height with the increment of harvest index. Cultivar differences were found on seed dry weight, crop growth rate from R1 to R5, and leaf/stem ratio of R5. From the above results, soybean growth responses to excessive soil water in paddy field were different between seed filling stage and late vegetative to early reproductive growth stages.

• Ocean and Polar Research
• /
• v.35 no.1
• /
• pp.51-61
• /
• 2013

Two surveys were conducted in January 2006 and September 2007 with multibeam echosounder to investigate the dune shape, migration rate, and bedload transport rate using dune-tracking method on an offshore sand ridge at southern Gyeonggi Bay. The migration rates of dunes range from 1.8 $myr^{-1}$) to 56.0 $myr^{-1}$), at the upper northwestern side of sand ridge towards the southwest direction and from the center of the sand ridge towards the northeast direction respectively. Large (i.e. length 10-100 m) dunes show faster migration (0.3-23.4 $myr^{-1}$) ) than very large (i.e. length > 100 m) dunes because larger dunes have required a larger volume of sediments to be displaced. The decreases in dimensions and migration rates of dunes from the center of sand ridge to the lower part of southeastern side on the sand ridge can be ascribed to the decrease of sandy sediments availability, tidal currents with depth, and the coarsening of surface sediments from the crest of the sand ridge to the trough. Bedload transport rates on the basis of migration rates and dune dimensions decrease from 74.5 $m^2yr^{-1}$) at C transect to 35.6 $m^2yr^{-1}$) at R-02 transect.

• Korean Journal of Organic Agriculture
• /
• v.12 no.4
• /
• pp.437-450
• /
• 2004

This study was conducted with two objectives ; one was to select the suitable soybean cultivars for cultivation in paddy field and the other was to establish the environment-friendly rotational cropping system of soybean instead of rice in paddy field. In order to evaluate growth adaptation and yields, Eve soybean cultivars were cultivated in Yeoncheon, Keonggi province, with two cultivation methods such as level row and high ridge. Growth of the top plants, such as stem length, number of branches, diameter of stem, were higher in high ridge than in level row, however, the differences among the cultivars were bigger than those between the cultivation methods. Dry weight of top plant was significantly different among the cultivars during whole growth stages, however, it was higher in level row than in high ridge at V5 stage while it became higher in high ridge as growth progressed. Roots were more developed in high ridge than in level row during whole growth stages. T/R ratio in level row was higher than that in high ridge. During whole growth stages, significant differences were observed among the cultivars in growth and yields in each cultivation method and yields of Eunhakong was the highest. In results, number of nodules and T/R ratio at V5 stage, number of pods at R2 stage, and number of seeds and T/R ratio at R5 stage had highly correlated with yields, respectively.

• Journal of Periodontal and Implant Science
• /
• v.39 no.3
• /
• pp.367-373
• /
• 2009

Purpose: Following tooth extraction caused by severe periodontitis, alveolar ridge dimension lose their original volume. To reduce the alveolar ridge dimension, the ridge preservation technique has been introduced and tested in many clinical studies with membrane alone or membrane plus graft, achieving reduced ridge loss compared to extraction only. The aim of the present clinical study was to compare the post-extraction dimensional changes in the membrane exposure group to non-exposure group during healing period following ridge preservation technique. Methods: Ridge preservation was performed in 44 extraction sites. After extraction, deproteinized bovine bone mineral coated with synthetic oligopeptide (Ossgen-$X15^{(R)}$) or deproteinized bovine bone mineral (Bio-$Oss^{(R)}$) was implanted into the socket. A collagen membrane (Bio-$Gide^{(R)}$) was trimmed to cover the socket completely and applied to the entrance of the socket. Four clinical parameters were compared between baseline and 6 months. Results: During healing period, membrane exposure was observed at 19 sites. At the re-entry, hard newly formed tissue were observed at the ridge preservation site. The grafted socket sites were well preserved in their volume dimension. In both groups, horizontal ridge width was reduced and vertical height was increased. There were not statistically significant differences in horizontal (-1.32 mm vs -1.00 mm) and vertical ridge change (2.24 mm vs 2.37 mm at buccal crest, 1.36 mm vs. 1.53 mm at lingual crest) between two groups. Conclusions: The ridge preservation approach after tooth extraction effectively prevented resorption of hard tissue ridge in spite of membrane exposure during healing period.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.115-122
• /
• 2010

In this study, we analyzed ridge-runnel structure and ripple marks by using Envisat ASAR, JERS-1 SAR images and in-situ data in Mongsanpo intertidal flat located in Taean-Gun, Korea. A group of light-and-dark lines parallel to the shoreline, alternating 3-5 times, were observed in the intertidal flat in Envisat ASAR images. The patterns are related to ridge-runnel structure in the intertidal flat exposed to air. Well-drained runnels, typically with ripple marks, showed strong backscattering while runnels submerged by surface water or ridges, typically smooth with no ripple, have weak backscattering coefficients in Envisat ASAR images. In JERS-1 SAR images, however, the backscattering was very low on the entire intertidal flat and no ridge-runnel structure could be observed. The wavelengths of ripple marks measured from in-situ observations have ranges from 4 to 10 cm that satisfies the Bragg scattering condition of the 1st-order in Envisat ASAR images operating in C-band, but not in JERS-1 SAR that used L-band. Through this study using SAR images, we could successfully analyze the sedimentary conditions of intertidal flats with ridge-runnel and ripple marks which are not easily observed by optical sensors. It is expected that the results of this study with SAR images will contribute to the sedimentary research over intertidal flats.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.383-386
• /
• 1998

An application determination of the dominant-mode fields in ridge waveguides at all frequencies has been made. Evaluations of the fields along the walls of a commercially standard single-ridge guide having a usable frequency range from 3.75 to 15.0 Gc, This paper presented the analysis of the mode directive coupling characteristics of two ridge waveguide using mode matching techniques for TE10 mode.