• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.196-203
• /
• 2011

유체 유동에 수직인 방향으로 반복적 리브이 설치된 사각 채널에서 열전달 계수와 마찰계수를 측정하기 위해 실험을 수행하였다. 시험부의 치수는 198 mm(폭)과 40 mm(높이) 그리고 길이가 712mm인 직사각형 채널이다. 시험부 채널의 형상비는 4.95이고 수력 직경 $D_h$은 6.66 cm이었다. 4종류의 와이어 스크린 리브(rib)과 한 개의 일체형 리브을 사용하였다. 0.1 mm 두께의 스테인레스 강판 히터와 T형 열전대를 사용하였다. 레이놀즈 수의 범위는 20,000에서 60,000이었다. 수력직경($D_h$)과 리브의 높(e)이 비($e/D_h$)는 0.075이고 리브 간격(p) 대 높이(e)으 비(p/e)는 10이다. 연구결과 일체형 리브이 누셀트수와 마찰계수 모두 가장 컸다.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.921-928
• /
• 2004

Measurements of local heat/mass transfer coefficients in rotating two-pass ducts are presented. Ducts of three different aspect ratios (W/H), 0.5, 1.0 and 2.0, are employed with a fixed hydraulic diameter ($D_h$) of 26.7 nm. $90^{\circ}$-rib turbulators are attached on the leading and trailing walls symmetrically. The rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.056, and the rib pitch-to-rib height ratio (p/e) is 10. The experimental conditions are the same as those of the previous part of the study. As the rib height-to-duct height ratio (e/H) increases, the core flow is more disturbed and accelerated in the midsections of ribs. Therefore, the obtained data show higher heat/mass transfer in the higher aspect ratio duct. Dean vortices also augment heat/mass transfer in the turn and in the upstream region of the second pass. However, the effect becomes less significant for the higher aspect ratio because the surface area increases in the present geometric condition. The effect of rotation produces heat/mass transfer discrepancy.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.882-890
• /
• 2006

The present study investigates the pressure drop characteristics in rotating two-pass ducts. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter $(D_h)$ of 26.67mm. Rib turbulators are attached parallel in the four different arrangements on the leading and trailing surfaces of the test ducts. The ribs have a rectangular cross section of $2m(e){\times}3mm(w)$ and an attack angle of $70^{\circ}C$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.075. The results show that the highest pressure drop among each region appears in the turning region for the stationary case, but appears in the upstream region of the second pass for the rotating case. Effects of parallel rib arrangements are almost the same in the first pass for the stationary and rotating cases. In the second pass, however, heat transfer and pressure drop are high for the cases with parallel NN or PP type ribs in the stationary ducts. In the rotating ducts, they are high for the cases with parallel NN or PN type ribs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.782-789
• /
• 2001

Local heat/mass transfer and friction loss in a square duct roughened with various types of continuous and discrete rib turbulators are investigated. The combined effects of the gap flows of the discrete ribs and the secondary flows are examined for the purpose of the reduction of thermally weak regions and the promotion of the uniformity of heat/mass transfer distributions as well as the augmentation of average heat/mass transfer. The rib-to-rib pitch to the rib height ratio (p/e) of 8 and the rib angles of 90 and 60 deg are selected with $e/D_{h}=0.08$. The vortical structure of the secondary flows induced by the parallel angled arrays are quite distinct from that induced by the cross angled arrays. This distinction influences on heat/mass transfer and friction loss in all the tested cases. The gap flows of the discrete ribs reduce the strength of the secondary flows but promote local turbulence and flow mixing. As a result, the fairly uniform heat/mass transfer distributions are obtained with two row gaps.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.30-37
• /
• 2012

Effect of rib heights is found as significant parameter to enhance convective heat transfer performance under laminar and low turbulent regime. Circular ribs with different ribheight to channel height ratios, e/H = 0.05, 0.1, 0.15, are fabricated over the copper substrate respectively in a rectangular duct having 7.5 cross sectional aspect ratio. Only one rib pitch to rib height ratio (P/e = 10) has been chosen for all different height ribs. The result shows that the arithmetic average of turbulence intensity decreases with decreasing roughness height calculated between two ribs under laminar and low turbulent region. It occurs because the area of recirculation and reattachment zone also decreases with decreasing rib height. Optimum thermal enhancement factor is derived by 0.1 rib height to channel height ratio under low turbulent region but 0.15 rib height to channel height ratio gives maximum subjected to laminar flow.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.178-184
• /
• 2005

The present study investigates the effects of bleed flow on heat/mass transfer and pressure drop in a rotating channel with transverse rib turbulators. The hydraulic diameter ($D_h$) of the square channel is 40.0 mm. The bleed holes are located between the rib turburators on leading surface and the hole diameter (d) is 4.5 mm. The square rib turbulators are installed on both leading and trailing surfaces. The rib-to-rib pitch is 10.0 times of the rib height (e) and the rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.055. The tests were conducted at various rotation numbers (0, 0.2, 0.4), while the Reynolds number and the rate of bleed flow to main flow were fixed at 10,000 and 10%, respectively. The results suggest that the heat/mass transfer characteristics in the internal cooling passage are influenced by rib turbulators, bleed flow and the Cariolis force induced by rotation. For the rotating ribbed passage with bleed flow, the heat/mass transfer on the leading surface is hardly affected by bleed flow, but that on the trailing surface decreases due to the diminution of main flow. The results also show that the friction factor decreases with the bleed flow.

• Food Science and Biotechnology
• /
• 제16권5호
• /
• pp.807-811
• /
• 2007

Diabetes is marked by high glucose levels and is associated with decreased bone mass and increased fracture rates. To determine if [6]-gingerol could influence osteoblast dysfunction induced by 2-deoxy-D-ribose (dRib), osteoblastic MC3T3-E1 cells was treated with dRib and [6]-gingerol and markers of osteoblast function and oxidized protein were examined. [6]-Gingerol ($10^{-7}\;M$) significantly increased the growth of MC3T3-E1 cells in the presence of 30 mM dRib (p<0.05). [6]-Gingerol ($10^{-7}\;M$) caused a significant elevation of alkaline phosphatase (ALP) activity, collagen content, and osteocalcin secretion in the cells. We then examined the effect of [6]-gingerol on the production of osteoprotegerin and protein carbonyl in osteoblasts. Treatment with [6]-gingerol ($10^{-9}$ and $10^{-7}\;M$) increased osteoprotegerin secretion in osteoblastic cells. Moreover, [6]-gingerol ($10^{-9}$ and $10^{-7}\;M$) decreased protein carbonyl contents of osteoblastic MC3T3-E1 cells in the presence of 30 mM dRib. Taken together, these results demonstrate that [6]-gingerol inhibits dRib-induced damage and may be useful in the treatment of diabetes related bone diseases.

• 한국CDE학회논문집
• /
• 제11권4호
• /
• pp.246-255
• /
• 2006

Ribs and fans are interesting geometric entities that are derived from an ordinary $B\'{e}zier$ curve or surface. A rib itself is a $B\'{e}zier$ curve or surface with a lower degree than the given curve or surface. A fan is a vector field whose degree is also lower than its origin. First, we present methods to transform the control points of a $B\'{e}zier$ curve or surface into the control points and vectors of its ribs and fans. Then, we show that a $B\'{e}zier$ curve of degree n is decomposed into a rib of degree (n-1), a fan of degree (n-2), and a scalar function of degree 2. We also show that a $B\'{e}zier$ surface of degree (m, n) is decomposed into a rib of degree (m-1, n-1) and three fans of degrees (m-1, n-2), (m-2, n-1), and (m-2, n-2), respectively. In addition, the lengths of the fans are further controlled by scalar functions of degree 2 and (2, 2). We present relevant notations and definitions, introduce theories, and present some of design examples.

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2175-2178
• /
• 2014

• 동력기계공학회지
• /
• 제5권2호
• /
• pp.30-35
• /
• 2001

A comparison of fully developed heat transfer and friction factor characteristics has been made in rectangular ducts with one wall roughened by five different shapes. The effects of rib shape geometries and Reynolds number are examined. The rib height-to-duct hydraulic diameter, pitch-to-height ratio, and aspect ratio of channel width to height are fixed at $e/D_e=0.0476$, P/e=8, and W/H=2.33, respectively. To understand the mechanisms of the heat transfer enhancements, the measurements of the friction factors are also conducted in the smooth and rough channels. The data indicate that the triangular type rib has a substantially higher efficiency index than any other ones in the range we studied.