Browse > Article
http://dx.doi.org/10.3795/KSME-B.2006.30.9.882

Pressure Drop Distributions in Rotating Channels with Turning Region and Angled Ribs (II) - Parallel Rib Arrangements -  

Kim, Kyung-Min (연세대학교 대학원 기계공학부)
Park, Suk-Hwan (연세대학교 대학원 기계공학부)
Lee, Dong-Hyun (연세대학교 대학원 기계공학부)
Cho, Hyung-Hee (연세대학교 기계공학부)
Publication Information
Transactions of the Korean Society of Mechanical Engineers B / v.30, no.9, 2006 , pp. 882-890 More about this Journal
Abstract
The present study investigates the pressure drop characteristics in rotating two-pass ducts. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter $(D_h)$ of 26.67mm. Rib turbulators are attached parallel in the four different arrangements on the leading and trailing surfaces of the test ducts. The ribs have a rectangular cross section of $2m(e){\times}3mm(w)$ and an attack angle of $70^{\circ}C$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio $(e/D_h)$ is 0.075. The results show that the highest pressure drop among each region appears in the turning region for the stationary case, but appears in the upstream region of the second pass for the rotating case. Effects of parallel rib arrangements are almost the same in the first pass for the stationary and rotating cases. In the second pass, however, heat transfer and pressure drop are high for the cases with parallel NN or PP type ribs in the stationary ducts. In the rotating ducts, they are high for the cases with parallel NN or PN type ribs.
Keywords
Coriolis Force; Pressure Drop; Rib Turbulator; Rotating Duct;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Liou, T. M., Chen, C. C. and Chen, M. Y., 2003, 'Rotating Effect on Fluid Flow in Two Smooth Ducts Connected by a 180-Degree Bend,' ASME Journal of Fluid Engineering, Vol. 125, pp. 138-148   DOI   ScienceOn
2 Iacovides, H., Jackson D. C., Kelemenis, G., Launder, B. E. and Yuan, Y. M., 2001, 'Flow and Heat Transfer in a Rotating U-Band with 45 Ribs,' Int. J. Heat and Fluid Flow, Vol. 22, pp. 308-314   DOI   ScienceOn
3 Lee, S. Y., 2000, 'Effects of the Rib Arrangements and Rotation on Heat/Mass Transfer in Turbine Blade Cooling Passage,' Master Thesis, Yonsei University, Korea
4 Wagner, J. H., Johnson, B. V. and Kopper, F. C., 1991, 'Heat Transfer in Rotating Serpentine Passages With Smooth Walls,' ASME Journal of Turbomachinery, Vol. 113, pp. 321-330   DOI
5 Mochizuki, S., Murata, A., Shibata, R. and Yang, W. J., 1999, 'Detailed Measurement of Local Heat Transfer Coefficients in Turbulent Flow Through Smooth and Rib-Roughened Serpentine Passages With a $180^{\circ}$ Sharp Bend,' Int. J. Heat and Mass Transfer, Vol. 42, pp. 1925-1934   DOI   ScienceOn
6 Taslim, M. E., Li, T. and Spring, S. D., 1998. 'Measurements of Heat Transfer Coefficients and Friction Factors in Passages Rib-Roughened on All Walls,' ASME Journal of Turbomachinery, Vol. 120, pp. 709-716
7 Wu, S. J., Kim, W. S. and Cho, H. H., 'Augmented Heat Transfer in a Rectangular Duct with Angled Ribs,' Transactions of the KSME(B), Vol. 22, No. 4, pp. 530-541
8 Bons, J. P. and Kerrebrock, J. L., 1999, 'Complementary Volocity and Heat Transfer Measurements in a Rotating Cooling Passage With Smooth Walls,' ASME Journal of Turbomachinery, Vol. 121, pp. 651-652   DOI
9 Gee, D. L. and Webb, R. L., 1980, 'Forced Convection Heat Transfer in Helically Rib-Roughened Tubes,' Int. J. Heat and Mass Transfer, Vol. 3, pp. 1127-1136
10 Han, J. C., Park, J. S. and Lei, C. K., 1985, 'Heat Transfer Enhancement in Channels with Turbulence Promoters,' ASME J. Engineering for Gas Turbines and Power, Vol. 107, pp. 628-635   DOI
11 Wright, L. M., Fu, W. L. and Han, J. C., 2004, 'Thermal Performance of Angled, V-Shaped, and W -Shaped Rib Turbulators in Rotating Rectangular Cooling Channels,' ASME Journal of Turbomachinery, Vol. 126, pp. 604-614   DOI
12 Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
13 Petukhov, B. S., 1970, Advances in Heat Transfer, Vol. 6, pp. 503-504, Academic Press, New York
14 Kim, K. M., Lee, D. H. and Cho, H. H., 2006, 'Influence of Turning Region and Channel Rotation on Pressure Drop in a Square Channel with Transverse Ribs, ' Transactions of the KSME(B), Vol. 30, No. 2, pp. 126-135
15 Kim, K. M., Kim, Y. Y., Rhee, D. H. and Cho, H. H., 2005, 'Effects of Rotation Speed on Heat Transfer and Flow in a Coolant Passage with Turing Region (I) - Cross Ribbed Duct,' Transactions of the KSME(B), Vol. 29, No. 6, pp. 737-746
16 Kim, K. M., Kim, Y. Y., Rhee, D. H. and Cho, H. H., 2005, 'Effects of Rotation Speed on Heat Transfer and Flow in a Coolant Passage with Turing Region (II) - Parallel Ribbed Duct,' Transactions of the KSME(B), Vol. 29, No. 8, pp. 911-920
17 Acharya, S., Zhou, F., Lagrone, J., Mahmood, G. and Bunker, R. S., 2005, 'Latticework (Vortex) Cooling Effectiveness: Rotating Channel Experiments,' ASME Journal of Turbomachinery, Vol. 127, pp. 471-478   DOI
18 Prabhu, S. V. and Vedula, R. P., 2003, 'Pressure Drop Characteristics in a Rib Roughened Rotating Square Duct with a Sharp $180^{\circ}$ Bend,' J. Enhanced Heat Transfer, Vol. 10, pp. 363-378   DOI
19 Lin, Y. L., Shih, T. I. P. and Stephens, M. A., Chyu, M. K., 2001, 'A Numerical Study of Flow and Heat Transfer in a Smooth and Ribbed U-Duct With and Without Rotation.' ASME Journal of Heat Transfer, Vol. 123, pp. 219-232   DOI   ScienceOn
20 Prabhu, S. V. and Vedula, R. P., 2000, 'Pressure Drop Characteristics in a Rotating Smooth Square Channel With a Sharp $180^{\circ}$ Bend,' Experimental Thermal and Fluid Science, Vol. 21, pp. 198-205   DOI   ScienceOn