• Clinics in Shoulder and Elbow
• /
• 제24권3호
• /
• pp.141-146
• /
• 2021

Background: The purpose of the present study was to determine how long superior screws alone or in combination with posterior placement of metaglene screws protruding and penetrating into the scapular spine in reverse total shoulder arthroplasty affect the strength of the scapular spine in a fresh cadaveric scapular model. Methods: Seven fresh cadaver scapulas were allocated to the control group (short posterior and superior screws) and seven scapulars to the study group (spine base fixation with a four long screws, three with both long superior and long posterior screws). Results: The failure load was lower in the spine fixation group (long screw, 869 N vs. short screw, 1,123 N); however, this difference did not reach statistical significance (p>0.05). All outside-in long superior or superior plus posterior screws failed due to scapular spine base fracture; failures in the short screw group were due to acromion fracture. An additional posterior outside-in screw failed to significantly decrease the failure load of the acromion spine. Conclusions: The present study highlights the significance of preventing a cortical breach or an outside-in configuration when a superior or posterior screw is inserted into the scapular spine base.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2002년도 아시아견관절학술대회
• /
• pp.7-7
• /
• 2002

Historically, the decision to perform a hemiarthroplasty (HHR) versus a total shoulder arthroplasty (TSA) is based on the status of the glenoid and the status of the soft tissues (rotator cuff). In disease processes where the glenoid articular cartilage is relatively well preserved such as avascular necrosis and complex proximal humerus fractures, most orthopaedists recommend performing a HHR while preserving the native glenoid articular surface. At the other end of the spectrum, if the glenoid has excessive bone loss or is unreconstructible, a HHR is the preferred procedure. In patients who have deficient so(t-tissues (rotator cuff) such as rotator cuff tear arthropathy and, occasionally, rheumatoid arthritis, a HHR is the procedure of choice. The indications for HHR in osteoarthritis remain somewhat controversial. There is mounting evidence that performing a HHR for osteoarthritis is inferior to TSA. Recent developments, or 'third generation techniques and materials', in shoulder arthroplasty are expected to improve the longevity of TSA, particularly the glenoid component. In addition, newer designs of reverse-ball prostheses are entering the market with promising early results in patients with deficient rotator cuff mechanisms.

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.108-116
• /
• 2024

Reverse total shoulder arthroplasty (RTSA) is widely popular among shoulder surgeons and patients, and its prevalence has increased dramatically in recent years. With this increased use, the indicated pathologies associated with RTSA are more likely to be encountered, and challenging patient presentations are more likely to be seen. One prominent challenging presentation is RTSA patients with severe glenoid bone loss. Several techniques with varying degrees of invasiveness, including excessive reaming, alternate centerline, bone grafting, and patient-specific implants (PSIs), have been developed to treat patients with this presentation. PSI treatment uses a three-dimensional reconstruction of a computed tomography scan to design a prosthetic implant or component customized to the patient's glenoid morphology, allowing compensation for any significant bone loss. The novelty of this technology implies a paucity of available literature, and although many studies show that PSIs have good potential for solving challenging shoulder problems, some studies have reported questionable and equivocal outcomes. Additional research is needed to explore the indications, outcomes, techniques, and cost-efficiency of this technology to help establish its role in current treatment guidelines and strategies.

• Clinics in Shoulder and Elbow
• /
• 제18권3호
• /
• pp.138-143
• /
• 2015

Background: To evaluate the effect of preoperative fatty degeneration of deltoid and teres minor muscles on the clinical outcome in patient with reverse total shoulder arthroplasty (RTSA). Methods: Nineteen patients with RTSA were enrolled. The mean follow-up period was 16.1 months. The fatty degeneration of three distinct parts in each deltoid and the teres minor muscle was measured using a preoperative magnetic resonance imaging. Postoperatively, the muscle strengths for forward elevation (FE), abduction (Abd), and external rotation (ER) were measured using a myometer at the last follow-up. The parameters for clinical outcome were Constant Score (CS) and Korean Shoulder Score (KSS). Results: The number of cases was 10 in group 1 and 9 in group 2. The strength of FE and Abd were significantly higher in group 1 (p<0.001 and p<0.001, respectively), and the strength of ER was not different significantly between two groups (p=0.065). For the clinical outcome, both CS and KSS were higher in group 1 (p=0.002 and p=0.002, respectively). The number of patients in group A was 11, and group B was 8. Although there was not a significant difference in terms of FE and Abd between group A and B (p=0.091, p=0.238), ER was significantly higher in group A (p=0.012). We did not find a significant difference in the clinical scores (CS, p=0.177 and KSS, p=0.238). Conclusions: These findings suggest the importance of a preoperative evaluation of the fatty degeneration of deltoid and teres minor muscles for predicting postoperative strength and clinical outcome.

• Clinics in Shoulder and Elbow
• /
• 제26권3호
• /
• pp.238-244
• /
• 2023

Background: Many patients use online resources to educate themselves on surgical procedures and make well-informed healthcare decisions. The aim of our study was to evaluate the quality and readability of online resources exploring shoulder arthroplasty. Methods: An internet search pertaining to shoulder arthroplasty (partial, anatomic, and reverse) was conducted using the three most popular online search engines. The top 25 results generated from each term in each search engine were included. Webpages were excluded if they were duplicates, advertised by search engines, subpages of other pages, required payments or subscription, or were irrelevant to our scope. Webpages were classified into different source categories. Quality of information was assessed by HONcode certification, Journal of the American Medical Association (JAMA) criteria, and DISCERN benchmark criteria. Webpage readability was assessed using the Flesch reading ease score (FRES). Results: Our final dataset included 125 web pages. Academic sources were the most common with 45 web pages (36.0%) followed by physician/private practice with 39 web pages (31.2%). The mean JAMA and DISCERN scores for all web pages were 1.96±1.31 and 51.4±10.7, respectively. The total mean FRES score was 44.0±11.0. Only nine web pages (7.2%) were HONcode certified. Websites specified for healthcare professionals had the highest JAMA and DISCERN scores with means of 2.92±0.90 and 57.96±8.91, respectively (P<0.001). HONcode-certified webpages had higher quality and readability scores than other web pages. Conclusions: Web-based patient resources for shoulder arthroplasty information did not show high-quality scores and easy readability. When presenting medical information, sources should maintain a balance between readability and quality and should seek HONcode certification as it helps establish the reliability and accessibility of the presented information. Level of evidence: IV.

• Clinics in Shoulder and Elbow
• /
• 제22권1호
• /
• pp.16-23
• /
• 2019

Background: We aimed to evaluate whether the use of our novel patient-specific guide (PSG) with 3-dimensional reconstruction in reverse total shoulder arthroplasty (RTSA) would allow accurate and reliable implantation of the glenoid and humeral components. Methods: 20 fresh-frozen cadaveric shoulders were used. The PSG group (n=10) and conventional group (n=10) was evaluated the accuracy and reproducibility of implant positioning between before and after surgery on the computed tomography image. Results: The superoinferior and anteroposterior offset in the glenoid component were $0.42{\pm}0.07$, $0.50{\pm}0.08$ in the conventional group and $0.45{\pm}0.03$, $0.46{\pm}0.02$ in the PSG group. The inclination and version angles were $-1.93^{\circ}{\pm}4.31^{\circ}$, $2.27^{\circ}{\pm}5.91^{\circ}$ and $0.46^{\circ}{\pm}0.02^{\circ}$, $3.38^{\circ}{\pm}2.79^{\circ}$. The standard deviation showed a smaller difference in the PSG group. The anteroposterior and lateromedial humeral canal center offset in the humeral component were $0.45{\pm}0.12$, $0.48{\pm}0.15$ in the conventional group and $0.46{\pm}0.59$ (p=0.794), $0.46{\pm}0.06$ (p=0.702) in the PSG group. The PSG showed significantly better humeral stem alignment. Conclusions: The use of PSGs with 3-dimensional reconstruction reduces variabilities in glenoid and humerus component positions and prevents extreme positioning errors in RTSA.

• 대한견주관절학회:학술대회논문집
• /
• 대한견주관절학회 2009년도 제17차 학술대회
• /
• pp.118-119
• /
• 2009

• Clinics in Shoulder and Elbow
• /
• 제27권1호
• /
• pp.88-107
• /
• 2024

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.

• Clinics in Shoulder and Elbow
• /
• 제27권3호
• /
• pp.353-360
• /
• 2024

Background: Total shoulder arthroplasty (TSA) in patients with rheumatoid arthritis (RA) can present unique challenges. The aim of this study was to compare both systemic and joint-related postoperative complications in patients undergoing primary TSA with RA versus those with primary osteoarthritis (OA). Methods: Using the TriNetX database, Current Procedural Terminology and International Classification of Diseases, 10th edition codes were used to identify patients who underwent primary TSA. Patients were categorized into two cohorts: RA and OA. After 1:1 propensity score matching, postoperative systemic complications within 90 days following primary TSA and joint-related complications within 5 years following anatomic TSA (aTSA) and reverse shoulder arthroplasty (RSA) were compared. Results: After propensity score matching, the RA and OA cohorts each consisted of 8,523 patients. Within 90 days postoperation, RA patients had a significantly higher risk of total complications, deep surgical site infection, wound dehiscence, pneumonia, myocardial infarction, acute renal failure, urinary tract infection, mortality, and readmission compared to the OA cohort. RA patients had a significantly greater risk of periprosthetic joint infection and prosthetic dislocation within 5 years following aTSA and RSA, and a greater risk of scapular fractures following RSA. Among RA patients, RSA had a significantly higher risk of prosthetic dislocation, scapular fractures, and revision compared to aTSA. Conclusions: Following TSA, RA patients should be considered at higher risk of systemic and joint-related complications compared to patients with primary OA. Knowledge of the risk profile of RA patients undergoing TSA is essential for appropriate patient counseling and education.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.202-209
• /
• 2022

Background: The purpose of our study was to investigate short-term outcomes of two-stage reverse total shoulder arthroplasty (RTSA) with an antibiotic-loaded cement spacer for shoulder infection. Methods: Eleven patients with shoulder infection were treated by two-stage RTSA following temporary antibiotic-loaded cement spacer. Of the 11 shoulders, nine had pyogenic arthritis combined with complex conditions such as recurrent infection, extensive osteomyelitis, osteoarthritis, or massive rotator cuff tear and two had periprosthetic joint infection (PJI). The mean follow-up period was 29.9 months (range, 12-48 months) after RTSA. Clinical and radiographic outcomes were evaluated using the visual analog scale (VAS) score for pain, American Shoulder and Elbow Surgeons (ASES) score, subjective shoulder value (SSV), and serial plain radiographs. Results: The mean time from antibiotic-loaded cement spacer to RTSA was 9.2 months (range, 1-35 months). All patients had no clinical and radiographic signs of recurrent infection at final follow-up. The mean final VAS score, ASES score, and SSV were significantly improved from 4.5, 38.6, and 29.1% before RTSA to 1.7, 75.1, and 75.9% at final follow-up, respectively. The mean forward flexion, abduction, external rotation, and internal rotation were improved from 50.0°, 50.9°, 17.7°, and sacrum level before RTSA to 127.3°, 110.0°, 51.8°, and L2 level at final follow-up, respectively. Conclusions: Two-stage RTSA with antibiotic-loaded cement spacer yields satisfactory short-term clinical and radiographic outcomes. In patients with pyogenic arthritis combined with complex conditions or PJI, two-stage RTSA with an antibiotic-loaded cement spacer would be a successful approach to eradicate infection and to improve function with pain relief.