• 제목/요약/키워드: reverse ordering

검색결과 11건 처리시간 0.025초

Modified Sign Test Using Reverse Ranked Ordering-Set Samples

  • Kim, Hyun-Gee;Kim, Dong-Hee
    • Communications for Statistical Applications and Methods
    • /
    • 제13권2호
    • /
    • pp.419-428
    • /
    • 2006
  • The method of Reverse Ranked Ordering-Set Sampling(RROSS) as an opposed Ranked Ordering-Set Sampling(ROSS) and Ranked-Set Sampling(RSS) is discussed. We propose the test statistic using sign test on RROSS. This method is effective when observations are expensive and measurement is perhaps destructive or invasive. This method obtains more informations than ROSS and RSS. The asymptotic relative efficiencies of RROSS with respect to ROSS and RSS are always greater than 1 for all sample sizes. We consider a simple model to describe the effect of imperfect judgment errors.

SMLD: Enhanced MIMO-Signal Detection for Wireless MIMO Communication Receivers

  • Baek, Myung-Sun;Woo, Mi-Ae;Lim, Jae-Hyuck;You, Young-Hwan;Song, Hyoung-Kyu
    • ETRI Journal
    • /
    • 제29권2호
    • /
    • pp.240-242
    • /
    • 2007
  • This letter proposes a simplified maximum likelihood detection (SMLD) scheme to improve the detection performance of multiple-input multiple-output receivers. The SMLD detects V streams according to the first detected V sub-streams. Through an ML test, the most probable stream is selected. Moreover, to detect the layer with the worst post-detection SNR accurately, reverse ordering is applied to the SMLD. Simulation results show that the performance of the Vertical Bell Laboratories layered space-time (V-BLAST) system can be improved by adopting the SMLD technique. In the case of reverse ordering, the SMLD can achieve a similar ML performance with significant reduction in computational complexity.

  • PDF

순차적인 간섭제거를 사용하는 공간 다중화 전송 MIMO 시스템의 전송 안테나 선택 방법에 관한 연구 (Transmit Antenna Selection for Spatial Multiplexing with Per Antenna Rate Control and Successive Interference Cancellation)

  • 문철;정창규
    • 한국통신학회논문지
    • /
    • 제30권6C호
    • /
    • pp.560-569
    • /
    • 2005
  • 본 논문은 순차적인 간섭제거와 전송 안테나 별 전송률을 제어하는 공간 다중화 전송 MIMO 시스템에서 채널환경에 따라 전송에 사용되는 안테나를 선택하고 데이터 율을 조절하는 알고리즘을 제안한다. 수신기에서 전송에 사용될 송신 안테나 및 전송률을 결정하고, 이는 각 송신 안테나 별 전송률에 대한 피드백 채널을 통해 송신기로 전송된다. 본 연구에서는 각 단계에서 최소의 SINR을 가지는 안테나를 제거해가는 연속적인 단계들로 이루어진 직렬 결정 방식을 제안한다. 또한, 각 연속적인 심볼 추정 단계에서 가장 낮은 신호 대 간섭 비를 갖는 심볼을 먼저 추정하는 "reverse detection ordering"이 각 안테나에 할당되는 용량 차이를 증가시킴으로서 안테나 선택에 의한 이득을 증가시킴을 보인다. 시뮬레이션 결과는 제안된 "reverse detection ordering"을 기반으로 하는 직렬 결정 방식이 낮은 복잡도을 가지면서 heuristic 방식과 비슷한 용량을 제공함을 보여준다.

ON THE DYNAMICAL PROPERTIES OF SOME FUNCTIONS

  • Yoo, Seung-Jae
    • 충청수학회지
    • /
    • 제15권2호
    • /
    • pp.47-56
    • /
    • 2003
  • This note is concerned with some properties of fixed points and periodic points. First, we have constructed a generalized continuous function to give a proof for the fact that, as the reverse of the Sharkovsky theorem[16], for a given positive integer n, there exists a continuous function with a period-n point but no period-m points wherem is a predecessor of n in the Sharkovsky ordering. Also we show that the composition of two transcendental meromorphic functions, one of which has at least three poles, has infinitely many fixed points.

  • PDF

Optimal Order Quantity Models for three types of reverse logistics networks in Product Recovery Environment

  • 김주용;김기범;정봉주
    • 한국경영과학회:학술대회논문집
    • /
    • 한국경영과학회 2004년도 추계학술대회 및 정기총회
    • /
    • pp.565-565
    • /
    • 2004
  • Due to limitation of resources and increasing concerns about environment, reverse logistics has received growing attention in recent years. In this paper, we propose three types of reverse logistics networks based on reuse of returnable containers, materials recycling process and remanufacturing for parts reuse. First, the sender in the re-usable item network supplies containers for the recipient and orders either new containers from external supplier or returnable containers cleaned from the container depot. Second, the recycling center in the proposed recycling network collects either end of life products from customer or faulty goods from manufacturer, collected products are dismantled into materials and materials go into recycling process. Finally, the manufacturer in the proposed remanufacturing network has two alternatives for supplying parts: either ordering the required parts to external supplier or overhauling disassembled parts and bringing them back 'as new' conditions. In this product recovery environment, we build optimal order quantity models to minimize the total logistics costs related to reverse logistics network. The validity of the proposed model is investigated through comprehensive computational experiments.

  • PDF

3GPP의 ARQ를 위한 threshold에 의존하는 점유량 조절 방식 (Threshold-dependent Occupancy Control Schemes for 3GPP's ARQ)

  • 신우철;박진경;하준;최천원
    • 전기전자학회논문지
    • /
    • 제9권2호
    • /
    • pp.123-135
    • /
    • 2005
  • 3GPP는 RLC 프로토콜 명세서에서 신뢰할 수 있는 데이타 전송을 위해 window에 의해 조절되는 selective-repeat ARQ 방식을 채택하였다. 3GPP의 ARQ는 selective-repeat ARQ 부류에 속하므로 재정렬 문제가 불가피하게 야기된다. 긴 재정렬 시간은 throughput 및 지연 성능의 열화를 빚어내고 재정렬 버퍼의 범람을 불러올 수 있다. 또한 데이타의 상실 및 지연에 모두 민감한 서비스의 요구 조건을 수용하기 위해 재정렬 시간은 반드시 통제되어야 한다. 3GPP ARQ에서 window의 크기나 상태 보고 주기를 줄여 재정렬 버퍼의 점유량을 감소시킬 수 있다. 이로 인해 throughput 및 지연 성능이 저하되고 역방향 채널의 자원이 잠식된다. 재정렬 버퍼의 점유량을 줄이는 동시에 throughput 및 지연 성능의 열화를 억제하기 위한 방안으로 본 논문에서는 post-threshold 방식과 pre-threshold 방식이라는 threshold에 의존하는 점유량 조절 방식을 제안한다. 제안한 방식의 효과성을 판단하기 위해 fading 채널 등 실제적인 환경에서 최고 점유량, 최대 throughput, 평균 지연을 조사한다. 모의 실험 결과로부터 제안한 방식이 점유량과 throughput 간에 trade-off를 불러옴을 관찰한다. 또한 post-threshold 방식은 3GPP의 ARQ와 비교하여 재정렬 버퍼의 점유량을 증가시키지 않고 throughput 및 지연 성능을 향상시킬 수 있음을 확인한다.

  • PDF

반복 복호화를 사용하는 BLAST-STTC 시스템을 위한 역순서화 기법 (Reverse-Ordering Scheme for BLAST-STTC Systems using Iterative Decoding)

  • 송병민;박상규
    • 한국통신학회논문지
    • /
    • 제30권5C호
    • /
    • pp.338-343
    • /
    • 2005
  • 다중 송수신 안테나(Multiple Input Multiple Output : MIMO) 시스템은 높은 데이터율 뿐만 아니라 효율적인 주파수 자원의 활용을 필요로 하는 차세대 이동 통신 시스템에 가장 적합한 시스템 중 하나로 주목받고 있다. 그에 따라 MIMO 전송 데이터율을 높이기 위해 2개의 송신 안테나를 기본으로 하는 STTC 부호화 그룹을 다수 형성하여 전송하고 수신단에서 다른 그룹의 간섭을 제거하는 BLAST-STTC 기법이 제안되었다. 본 논문에서는 모든 그룹이 최대 다이버시티 이득을 얻는 동시에 간섭 제거 기법의 성능을 향상시킬 수 있는 역순서화된 반복 복호화 기법을 제안한다. 그리고 모의실험을 통해 제안된 기법과 기존 기법의 프레임 오류확률(Frame Error Rate : FER) 성능을 비교한다.

실무 3D 스캐닝 및 BIM 활용을 위한 발주자 - 실무자 간 협업프로세스 모델 (A collaborative process between employers and practitioners for utilization of BIM and 3D scanning)

  • 김도영
    • 한국BIM학회 논문집
    • /
    • 제11권2호
    • /
    • pp.33-42
    • /
    • 2021
  • In construction sites, policies are changing considering the convergence of 3D scanning and BIM. In order to respond to this, it is urgent to develop guidelines for systematic collaboration methods that take into account the perspectives of practitioners. By participating in the delivery process using 3D scanning technology, tasks such as ordering, field scanning are defined in terms of mutual communications. Also, the collaboration process is about communications between off-site and on-site, such as feed-back using data and documents. In the future, we will propose guidelines based on such collaborative process models.

외식 배달 서비스에 대한 소비자 관점 탐색적 연구 (An Exploratory Study on Consumer Perspectives on Food Delivery Services)

  • 최재훈;김판수
    • 산업경영시스템학회지
    • /
    • 제45권4호
    • /
    • pp.79-85
    • /
    • 2022
  • Various non-face-to-face services are being activated due to the influence of the Corona 19 virus around the world. However, unlike the rapid development of delivery services, social awareness of delivery services is causing many problems. Therefore, in this study, we analyze the quality attributes of delivery services from the consumer's point of view, and based on the results, we try to derive a direction for service improvement. In this study, quality factors were established through interviews and surveys with actual consumers, and quality attributes were classified through the Kano model and Timko's customer satisfaction coefficient. "Attractive" is ('Ease of ordering, Accurate delivery to the designated place'), "One Dimensional" is ('Variety of payment methods, Accurate delivery on time, Accurate delivery of ordered food, Degree of non-deformation of packaging conditions, etc., Convenience of use time'), "Must be" is ('Kindness of the delivery person'), "Reverse" is ('provision of services, service response to order discrepancies'). This study has academic significance in that it compensated for the disadvantage of not being able to interpret the mathematical meaning of the Kano model with Teamco's customer satisfaction coefficient. It also has practical implications in that it provides an indirect clue to future improvement directions.

전자현미경을 이용한 Anorthoclase의 미세구조 및 화학 연구 (A Study on Microstructures and Chemistry of Anorthoclase Using Electron Microscopy)

  • 이영부;김윤중;이석훈;이정후
    • 한국광물학회지
    • /
    • 제16권3호
    • /
    • pp.233-243
    • /
    • 2003
  • 알칼리 장석 중 고온 상인 anorthoclase의 미세구조 및 화학을 EPMA 및 TEM을 이용하여 분석하였다. Anorthoclase는 BSE image 상에서 Na-rich 지역과 K-rich 지역이 다양한 크기의 lamella를 형성하며 혼재되어 있으며, EPMA 분석 결과 Na-rich 지역은 평균 조성이 Ab: 81%, Or: 3%, An: 12%이며 K-rich 지역은 평균 조성이 Ab: 45%, Or: 44%, An: 11%로 나타났다. TEM 관찰 결과 Na-rich 지역은 앨바이트(albite) 쌍정 구조가 잘 발달한 반면 K-rich 지역은 다시 미세한 앨바이트 쌍정이 발달한 앨바이트와 쌍정이 없는 orthoclase가 약 100 nm의 규칙적인 lamellae 형태를 이루며 서로 섞여 있음이 드러났다 K-rich 지역의 [001] 전자회절도형도 두 상이 공존함을 보이는데, 앨바이트 회절점은 쌍정 구조에 의하여 $(010) ^{*}$ / 방향으로 streaking이 나타난다. 이에 비하여 $(100)^{*}$ 방향으로는 앨바이트 회절점과 orthoclase 회절점이 모두 streaking을 가지는데 이는 Al과 Si의 배열-비배열 현상과 두 상의 계면 간에 나타나는 왜력(strain)에 기인한 것으로 여겨진다. 앨바이트와 orthoclase의 방향이 서로 반대로 나타나는 이유는 두 상의 계면 간의 왜력을 줄이기 위한 일종의 pole switching의 결과로 여겨진다. 위의 결과를 종합해 볼 때 연구된 광물은 중간 단계의 Al-Si 비배열 상태를 가지며 미세구조의 생성 온도가 $400^{\circ}C$$600^{\circ}C$로 추정되기 때문에 고온 상인 anorthoclase라기보다는 보다 저온 상인 cryptoperthite라 할 수 있다