• 한국음향학회지
• /
• 제28권3호
• /
• pp.213-221
• /
• 2009

수중 시역전 통신기법은 복잡한 수중채널환경에서 정합장 처리를 통해 수신단의 구조가 간단하면서 전송성능을 높이기 때문에 많은 연구가 진행되어 왔으나 디지털 시역전 통신을 하기 위한 전송변수에 대한 연구가 부족하다. 본 논문은 수중시역전 채널과 전송방식을 분석하여 시역전 통신이 공간 다이버서티 이득을 얻을 수 있음을 보였다. 그리고 디지털 시역전 전송 시 전송심볼간의 간섭을 회피하여 최적의 성능을 얻을 수 있는 통신변수인 심볼 구간, 프레임의 길이 및 전송 프로토콜에 대한 설계방법을 제안한다. 전산모의실험을 통해 제안된 설계변수를 이용한 시역전 통신에서의 전송심볼간 간섭효과를 보였다. 또한 보다 많은 트랜스듀서를 사용할수록 시역전 효과에 의해 부정합 신호경로의 개수와 크기가 줄어 ISI의 효과가 감소함을 보였다.

• 설비공학논문집
• /
• 제28권9호
• /
• pp.361-366
• /
• 2016

As an alternative of well-mixed storage tank with lower coil only, we have proposed a tank with lower and upper coils and verified a superior thermal stratification in a tank, which results in increased collector efficiency and solar fraction. But the phenomenon of temperature reversal was often experimentally observed in the tank, so a revised control was successfully applied which is to heat only lower coil using three way valve if temperature reversal occurs and to operate the collector with low flow rate when the condition of solar radiation is not good. In the present study, using TRNSYS we compared the existing lower heating and the proposed lower and upper heating with a control preventing temperature reversal. The results showed that the proposed method has an increase of collector efficiency by 5.1% and solar fraction by 3.2%.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.115-121
• /
• 2014

The intrinsic simplicity, ruggedness, and simple power electronic drive requirement of a Switched Reluctance Motor(SRM) make it possible to use in many commercial adjustable speed application. The simple magnetic circuit results in a high efficiency drive and low temperature rise, and the drive system provides a good drive characteristics. This paper is provides two phase 4/3 SRM that is similar to two phase 6/3 SRM as aspect to magnetic structure. Although 6/3 SRM does not experience any flux reversal as the flux is in the same direction whether phase A or B is excited, but two phase 4/3 SRM experiences a flux reversal in small part of stator yoke. The flux reversal in two phase 4/3 SRM could be relieved by an adjustment of stator yoke structure. The magnetic analysis and design considerations of the two phase 4/3 SRM have been obtained by the finite element method analysis (FEM).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.546-548
• /
• 2010

This paper proposes a new baseline-free TR-based SHM method in which the time-reversal (TR) property of the guided Lamb waves is utilized. The new TR-based SHM method has two distinct features when compared with the other existing SHM techniques: (1) The measurement- based backward TR process is replaced by the computation-based process (2) In place of the comparison method most commonly used for SHM, the TOF information of the damage signal extracted from the reconstructed signal is utilized for the damage diagnosis. For the damage diagnosis, the imaging method is adopted to efficiently detect damage by representing the damage as an image. The proposed TR-based SHM technique is then validated through the damage diagnosis experiment for an aluminum plate with a damage at different locations.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.700-708
• /
• 2004

Flux-reversal machine (FRM) is a new doubly-salient stator-permanent magnet (PM) machine with flux linkage reversal in the stator concentrated windings. It can operate in both motoring and generating modes. In this paper, a novel design technique to improve the performance of FRM is proposed. Proposed techniques have a new stator winding and a magnet arrangement method. The stator and rotor shape with a concave type and a flux barrier are also proposed. According to the experimental results, it is shown that the proposed FRM have an improved performance.

• 비파괴검사학회지
• /
• 제28권1호
• /
• pp.54-58
• /
• 2008

Time reversal (TR) of body waves in fluids and isotropic solids has been used in many applications including ultrasonic NDE. However, the study of the TR method for anisotropic materials is not well established. In this paper, the full reconstruction of the input signal is investigated for anisotropic media using an analytical formulation, called a modular Gaussian beam (MGB) model. The time reversal operation of this model in the frequency domain is done by taking the complex conjugate of the Gaussian amplitude and phase received at the TR mirror position. A narrowband reference signal having a particular frequency and number of cycles is then multiplied and the whole signal is inverse Fourier transformed. The original input signal is seen to be fully restored by the TR process of MGB model and this model can be more generalized to simulate the spatial and temporal focusing effects due to TR process in anisotropic materials.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.261-261
• /
• 2000

This paper analyzes the characteristics of pre-sliding friction of an X-Y table of CNC machining center at velocity reversal, and presents a simple and effective method of friction compensation based on this characteristics. At velocity reversal, a large position tracking error occurs because of the discontinuous change of friction. The relationship between the occurrence time of maximum position tracking error and the acceleration at zero velocity is analyzed by using the spring-like friction model. Furthermore, the experimental observation verifies this relation. From this, the state transition tine from pre-sliding regime into sliding regime can be predicted. Using the predicted transition time, the friction can be effectively compensated and table experimental results show its effectiveness.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.884-886
• /
• 2004

This paper introduces Flux-Reversal Machine(FRM) and presents the design of a single phase FRM to improve its starting torque. The effects of the design parameters on the characteristic and starting torque are analyzed by Finite Element Method(FEM). The considered design parameters are tapered airgap, stewed airgap, asymmetric PM width and slotted teeth. As a result, we can find the best model in producing starting torque of a single phase 2/3 FRM

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.921-923
• /
• 2003

This paper introduces Flux-Reversal Machine(FRM) and presents the design of a FRM to reduce the cogging torque. The effect of the design parameters on the characteristic and cogging torque is analyzed by finite Element Method(FEM). The considered design parameters are bifurcated teeth, chamfered magnet poles, chamfered rotor tooth tips and rotor skewing. As a result, we can find the optimum model reduced cogging torque and torque ripple in 6/8 FRM.

• Structural Engineering and Mechanics
• /
• 제11권2호
• /
• pp.211-219
• /
• 2001

This paper presents the tangent stiffness method for 3-D geometrically nonlinear folding analysis of a reversal arch. Experimental tests are conducted to verify the numerical analysis. The tangent stiffness method can accurately evaluate the geometrical nonlinearity due to the element translating as a rigid body, and the method can exactly handle the large rotation of the element in space. The arch in the experiment is made from a thin flat bar, and it is found that the folding process of the arch may be captured exactly by the numerical analysis with a model consisting of only 18 elements with the same properties.