• 동력기계공학회지
• /
• 제20권2호
• /
• pp.43-50
• /
• 2016

This research proposal is based on a novel non-contact technique of micro-sized bead injection process for fabrication of electronic paper display. This non-contact injection process is based on the principle of electrostatic force and uses micro-sized metal-coated beads dispersed in a solution. The dispersion retention times of three different solutions with viscosities of 10 cps, 100 cps, and 1000 cps were measured by optical equipment showing the retention times of 5 mins, 10 mins, and 30 mins respectively. The dispersion retention rate dropped as the time passed. The dispersion retention characteristic of 1000 cps solution was more stable as compared to those of 10 cps and 100 cps meaning that higher viscosity has better retention properties. The experimental results of bead injection at different viscosity levels of the solution were also measured and a stable injection result was achieved by using 1000 cps solution. This results show that stable injection is dependent on solution viscosity and dispersion.

• 한국미생물·생명공학회지
• /
• 제25권4호
• /
• pp.427-433
• /
• 1997

Sludge Returned CMAS process was applied to treat the wastewater from electric accessory manufacturing company while this type of wastewater was usually treated by chemical process. This result show that the removal rate of TCOD was about 70-80% regardless of hydraulic retention time, On the contrary, the removal rate of BOD was abtained in a range of 77-92% depending on hydraulic retention time. In order to remove more than 80% of organic materials with the proposed process, the F/M ratio should be maintained below 0.17. In this case, the calculated value of organic removal rate, Km, was calculated to be 1.26 hr$^{-1}$, and the ratio of cell synthesis/total energy was 0.32 and 0.26 for COD and BOD base, respectively. The yield coefficient was calculated to be 0.242 and the half velocity coefficient was 0.3 hr$^{-1}$. The value of endogenous respiration coefficient was 0.02 hr$^{-1}$. The measured effluent BOD concentration, MLSS concentration in aeration tank, oxygen uptake rate, and sludge production were matched relatively well with the calculated values using above coefficients, In order to optimize the dewatering of sludge, the hydraulic retention time was recommended to be 15. 6 hrs. These results indicate that the wastewater from an eletric accessory manufacturing company can be treated safely with a biological process.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.49-58
• /
• 2013

A selected halogenated organic contaminant, monochlorophenol was successfully degraded by photocatalytic reaction in a circulating batch system. The photocatalytic degradation in most cases follows first-order kinetics. The photocatalytic reaction rate increased in the $TiO_2$ dosage range of 0.1 g/L to 0.4 g/L, then decreased with further increase of the dosage. Also the degradation rate increased over the range of the retention time from 0.49 min. to 0.94 min., then decreased with further increase of the retention time in the circulating batch reactor. The photocatalytic activity was enhanced by addition of metal impurities, platinum(Pt) and palladium(Pd) onto the photocatalysts. The photocatalytic degradation rate increased with the increase of Pt and Pd in the content range of 0 to 2wt %, then decreased with further increase of the metal contents. Therefore the metal loading to $TiO_2$ influence the degradation rate of a halogenated organic compound by acting as electron traps, consequently reducing the electron/positive hole pair recombination rate.

• 경영과학
• /
• 제26권3호
• /
• pp.11-21
• /
• 2009

In this paper, we proposed some valuable analysis results of cultivation campaign marketing in A mobile telephone company. The cultivation campaign marketing is a new outbound TM campaign strategy composed of 4 steps for new subscribers. During the analyses, attrition rate of A mobile company, outbound TM rejection rate, contact rate/call success rate and additional service attrition rate after subscription are measured as an effect of cultivation campaign. The results showed that there were no statistical significance in improving retention rate between customers experienced 4 step cultivation campaign and control group. However, the cultivation campaign had a better effect on improving response rate and success of selling additional service product of mobile company compared to general selling campaign. This is because cultivation campaign group had been taking care of from subscription time. It is suggested that cultivation campaign had better confined customers more likely to buy additional service to outbound TM for the sake of financial efficiency.

• 한국농공학회논문집
• /
• 제59권2호
• /
• pp.49-55
• /
• 2017

Recently climate change and urbananization have been increased surface runoff, resulting in flooding. Retention basins have been constructed to control urban flooding by reducing peak flow rate. Recently, the retention basin plays a role in controlling combined sewer overflows (CSOs) as well as urban flooding. In this study, the retention basin with a rotatable bucket was suggested and scale down experiments was performed for the optimum design of the retention basin. Scaled down model was produced using a 3D printer after it was designed as law of similarity. Two times for operating a rotary bucket is required to sweep out the sediments deposited on the bottom of the basin. Optimized dimensions for the retention basin were width of 5 m, height of 5 m, bucket radius of 0.5 m, and bottom slope of 5.0 %. It can be concluded that the results obtained from this study can be used to design the retention basin with a rotatable bucket which does not require energy to operate.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권6호
• /
• pp.863-866
• /
• 2003

This study was conducted to examine the effects of dietary cellulose levels on growth, nitrogen utilization, the retention time of diets in the digestive tract, and caecal microflora of 2-month-old Single Comb White Leghorn male chickens fed 3 purified diets that contained 0, 3.5% and 10% cellulose in equal amount of nutrients for 7 days. Body weight gain and nitrogen utilization were significantly higher (p<0.05), while total microflora counts in the caecal contents and retention time of the diet in the digestive tract were significantly lower (p<0.05) in the group fed 3.5% dietary cellulose compared with the group fed 10% dietary cellulose. Body weight gain, nitrogen utilization and retention time of the diet in the digestive tract decreased significantly while the total microflora count in the caecal contents increased significantly in the group fed 10% dietary cellulose compared to the group fed 0% dietary cellulose (p<0.05). Chickens fed 10% dietary cellulose had significantly increased counts of uric acid-degradative bacteria such as Peptococcaceae and Eubacterium, including Peptostreptococcus (p<0.05). The results suggest that cellulose in purified diets is an effective ingredient and the effects on growth, nitrogen utilization, caecal microflora counts and diet retention time in the digestive tract are dependent on the inclusion rate. Positive or negative effects of dietary cellulose are displayed by growth, nitrogen utilization, caecal microflora counts and retention time of the diet in the digestive tract. Positive effects were displayed when the inclusion rate is 3.5% and negative effects were displayed when that is greater than 3.5% of the diet, and the phenomenon is without reference to the age of the chickens.

• 한국환경보건학회지
• /
• 제17권2호
• /
• pp.41-47
• /
• 1991

A study on the effects of volumetric loading rate, surface loading rate and hydraulic. retention time (HRT) for the anaerobic treatment was conducted with the anaerobic fixed-film process using synthetic wastewater at lower temperature than that of conventional anaerobic treatment. The results are as follows 1. Alkalinity and pH value decreased as the hydraulic retention time increased 2. Increase of the volumetric lodaing rate led to increasl of effluent COD concentration and decrease of COD removal efficiency. 3. The removed volumetric loading rate increased linearly according to the increase of the volumrtric loading rate. 4. Similarly, the linear increase of the removed surface loading rate was noticed with an increase of the surface loading rate.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.495-499
• /
• 2008

본 연구는 빗물 저장조 시스템의 유출량 변화모의를 통해 지붕면 유출제어의 가능성을 확인하고, 설계조건에 적절한 저장조(retention tank)-펌프 용량 조합의 결정방안을 제시하였다. 저장조의 운전조건을 고려한 물수지 방정식을 이용해 서울지역의 강우특성에 따른 저류량 및 첨두유출유량 변화를 모의하고, 그 결과를 강우재현기간별 저장조 용량-첨두 유출량-펌프 배수량 관계곡선 (TPP 곡선) 으로 작성하였다. 100년 빈도 첨두 유출을 지선 하수관로의 설계기준인 5년 빈도 첨두유출까지 제어할 경우, 지붕면적 $100m^2$ 당 펌프배수 용량은 $0{\sim}25{\ell}$/분, 저장조 용량은 $8.5{\sim}10m^3$으로 결정되었다. 즉, 서울지역의 지붕면적 $100m^2$ 당 적절한 저장조+펌프 용량조합은 $10m^3+0{\ell}$/분${\sim}8.5m^3+25{\ell}$/분이라고 할 수 있다. TPP 곡선을 이용하여 설계조건에 적절한 빗물 저장조-펌프의 용량조합 방안을 알 수 있었으며, 이를 이용해 현장여건에 고려한 구체적인 용량을 결정할 수 있을 것이다.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1011-1019
• /
• 2000

본 연구는 유입수의 농도, 수리학적 체류시간 및 F/M비와 슬러지 첨전성과의 상관관계를 새롭게 명확히 밝혀 기존에 제시된 각 처리법 즉 장기포기법, 재래식 활성슬러지법, 고율 활성슬러지법 및 수정포기법의 설계조건이 도출된 원인을 밝히고 동시에 이들 기 제시된 설계조건에 관계없이 설계가 가능함을 확인하기 위한 연구이다. 본 실험은 특히 체류시간과 미생물의 침강성을 중심으로 고찰되었는데, 이는 슬러지의 침강성이 기존 각 처리법의 운전조건을 결정하는 주인자$^{1)}$이기 때문이다. 따라서 각각의 처리법에 대해 제시된 설계범위를 벗어날 경우 슬러지는 팽화하는 것으로 알려져 있으며, 설계의 기초를 제공한 Lesperance$^{1)}$의 실험결과에서도 침강성이 확보되지 않는 부하범위가 발생하는 것으로 나타냈다. 위와 같이 일정 조건에서 슬러지가 팽화하는 원인은 Lesperance가 이전 다년간의 실패와 시도로 밝혀진 연속운전이 가능한 것으로 밝혀진 몇몇의 운전조건을 실험조건으로 채용함에 따라 각각의 체류시간에 해당하는 최적의 부하가 적용되지 않았기 때문이다. 하지만 본 실험결과 부하를 적절히 유지할 경우, F/M비 $6.3kg-BOD/kg-MLSS{\cdot}day$ 이하, HRT 0.67hr 이하의 조건에서 슬러지의 침강성이 SVI치 120 이하로 확보될 수 있음을 확인하였다. 따라서 본 연구에서는 체류시간과 그에 해당하는 최적 부하를 제시하였으며, 체류시간이 미생물의 침강성에 결정적 영향인자임을 밝히고, 아울러 본 실험결과를 근거로 이제까지 알려진 처리법에서는 적용된 바 없는 1시간 이하의 체류시간에서 고율 활성슬러지법의 적용 부하치를 수 배 능가하는 새로운 운전법 (UHR : Ultra high rate)도 가능함을 제시하였다.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.75-80
• /
• 2000

Kinetic data for the acid phase anaerobic digestion were presented in this study and the constants were determined with acid production rate and gas production rate. Process models based on continuous culture theory were used to describe the characteristics of the acid forming microorganisms and to enable further development toward utilization of the process in a more rational manner. Acid phase digestion can be separated with appropriate manipulation of hydraulic retention time in anaerobic digestion. Kinetic analysis of data from the various hydraulic retention times using a phase specific model obtained form the acid phase indicated maximum specific growth rate of 0.40/h, saturation constant of 2,000mgCOD.$\ell$, yield coefficient of 0.35 mgVSS/msCOD utilized and decay constant of 0.04/h for the acid production rate. Similar analysis of data for the gas production rate indicated maximum specific growth rate of 0.003/h, saturation constant of 2,200mgCOD/$\ell$, yield coefficient of 0.035 mgVSS/mgCOD utilized and decay constant of 0.06/h.