• 제목/요약/키워드: retained stability

검색결과 200건 처리시간 0.028초

Effective Interfacial Trap Passivation with Organic Dye Molecule to Enhance Efficiency and Light Soaking Stability in Polymer Solar Cells

  • Rasool, Shafket;Zhou, Haoran;Vu, Doan Van;Haris, Muhammad;Song, Chang Eun;Kim, Hwan Kyu;Shin, Won Suk
    • Current Photovoltaic Research
    • /
    • 제9권4호
    • /
    • pp.145-159
    • /
    • 2021
  • Light soaking (LS) stability in polymer solar cells (PSCs) has always been a challenge to achieve due to unstable photoactive layer-electrode interface. Especially, the electron transport layer (ETL) and photoactive layer interface limits the LS stability of PSCs. Herein, we have modified the most commonly used and robust zinc oxide (ZnO) ETL-interface using an organic dye molecule and a co-adsorbent. Power conversion efficiencies have been slightly improved but when these PSCs were subjected to long term LS stability chamber, equipped with heat and humidity (45℃ and 85% relative humidity), an outstanding stability in the case of ZnO/dye+co-adsorbent ETL containing devices have been achieved. The enhanced LS stability occurred due to the suppressed interfacial defects and robust contact between the ZnO and photoactive layer. Current density as well as fill factors have been retained after LS with the modified ETL as compared to un-modified ETL, owing to their higher charge collection efficiencies which originated from higher electron mobilities. Moreover, the existence of less traps (as observed from light intensity-open circuit voltage measurements and dark currents at -2V) are also found to be one of the reasons for enhanced LS stability in the current study. We conclude that the mitigation ETL-surface traps using an organic dye with a co-adsorbent is an effective and robust approach to enhance the LS stability in PSCs.

자석 유지장치를 이용한 Overdenture 수복에 관한 임상적 연구 (CASE REPORTS ON THE MAGNETIC RETAINED OVERDENTURES)

  • 방몽숙;최창환;김영이
    • 대한치과보철학회지
    • /
    • 제40권1호
    • /
    • pp.88-97
    • /
    • 2002
  • The purpose of this study was to evaluate a cases which was treated with magnetic attachments on the patients in edentulous mandible and maxilla. Author made magnetic overdenture for two patients and then clinical examination were used for evaluation of the function and change in retention during 30months. Patients showed difficulty in oral hygiene care at the beginning but they go used to it soon. It was effective in promotion of denture retention and stability and also gave patient emotionally uplifting psychologic state. This study suggest that magnetic attachment was effective for the treatment of patients presenting a few remaining teeth or teeth under severe caries or mobility.

아스팔트 콘크리트용 채움재로서 제강더스트의 특성에 관한 실험적 연구 (An Experimental Study on Properties of Electric Arc Furnace Dust for Minearal Filler of Asphalt Concrete)

  • 김주원
    • 콘크리트학회지
    • /
    • 제5권3호
    • /
    • pp.161-168
    • /
    • 1993
  • 본 연구는 아스팔트 콘크리트의 채움재로서 제강더스트의 사용가능성을 실험을 통하여 분석하였다. 실험에는 제강더스트의 기본물성시험과 혼합물의 비교시험을 포함시켰다. 비교시험에서는 채움재로서 석회석분을 사용하는 경우와 제강더스트를 사용하는 경우, 채움재와 아스팔트를 혼합한 필리-비투먼, 그리고 골재까지 혼합한 아스팔트 콘크리트에 대하여 물성을 비교분석하였다. 실험결과 제강더스트는 포장용 채움재의 규정을 만족시키며, 제강더스트를 채움재로 사용한 아스팔트 콘크리트보다 우수하며, 제강더스트는 아스팔트 혼합물용 채움재로써 충분히 사용가능한 것으로 밝혀졌다.

Activity and Stability of Immobilized Enzyme on Silk Sericin Bead

  • Oh, Hanjin;Lee, Ki Hoon
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • 제27권2호
    • /
    • pp.329-332
    • /
    • 2013
  • In present preliminary report, we showed the possibility of silk sericin (SS) in enzyme immobilization. SS beads were prepared and enzymes were immobilized on it. The specific activity of immobilized a-chymotrypsin retained more than 87% compared to the free enzyme. The immobilized a-chymotrypsin has better stability against ethanol especially those immobilized on SS beads coagulated in methanol. Immobilized trypsin and lipase had also comparable apparent activity compared to free enzyme. Our result indicates that SS could be a good candidate for enzyme immobilization support due to its hydrophilicity.

Influence of Al, Cu and Ni Additions on Mechanical Properties of Hot-Rolled Fe-9Mn-0.2C Medium-Manganese Steels

  • Young-Chul Yoon;Sang-Gyu Kim;Sang-Hyeok Lee;Byoungchul Hwang
    • Archives of Metallurgy and Materials
    • /
    • 제66권4호
    • /
    • pp.1007-1011
    • /
    • 2021
  • The microstructure and mechanical properties of hot-rolled Fe-9Mn-0.2C medium-manganese steels with different Al, Cu, and Ni contents were investigated in this study. Based on the SEM, XRD, and EBSD analysis results, the microstructure was composed of martensite, band-type delta ferrite, and retained austenite phases depending on the Al, Cu, and Ni additions. The tensile and Charpy impact test results showed that the sole addition of Al reduced significantly impact toughness by the presence of delta-ferrite and the decrease of austenite stability although it increased yield strength. However, the combined addition of Al and Cu or Ni provided the best combination of high yield strength and good impact toughness because of solid solution strengthening and increased austenite stability.

Psyllium Husk의 식이섬유 소재로서의 기능성 탐색 (Screening Study for the Functionality of Psyllium Husk as a Dietary Fiber Material)

  • 이신영;백진홍
    • 산업기술연구
    • /
    • 제25권B호
    • /
    • pp.229-239
    • /
    • 2005
  • Dietary powder from Plantaginis ovatae testa was prepared by mechnical milling/grinding of the outer layer of the seed. The crystalline/surface structures of its powder (100 mesh) were examined, and several physical functionalities including, water capacity, oil holding capacity, emulsion/foam properties and physiological functionality such as in-vitro glucose and bile acid retarding effects were also investigated. Water holding capacity(WHC) of psyllium powder was $33.71{\pm}0.10g$ water retained/g solid at room temperature, whileas oil holding capacity(OHC) for soybean or rice bran oil were about 1.80g oil retained/g solid. These values of WHC and OHC were about 5.6 times higher and 2.8 times lower than those of commercial ${\alpha}$-cellulose, respectively. Changes of pH showed a small effect on WHC, but WHC increased with temperature. Emulsion capacity of 2%(w/v) psyllium was about 60% level of 0.5%(w/v) xanthan gum but emulsion stability after incubation of 24 hours showed about 1.4 times improvement of xanthan gum(0.5%,w/v). Also, psylliume(above 2%, w/v) alone had higher foam capacity than that of xanthan(1.1 times) and especially, 1 or 2% addition of psyllium improved the foam stability of protein solution(1% albumin+0.5% $CaCl_2$) by factor of 3.3 and 6.0 times, respectively. The glucose and bile acid retarding effects of psyllium powder were relatively very excellent suggesting the prevention from diabetes and arteriosclerosis. Especially, psyllium showed the 3.7 and 3.3 times higher effect on in-vitro glucose and bile acid retardation than those of commercial ${\alpha}$-cellulose, respectively.

  • PDF

Evidence of an Alternative Route of Cellobiase Secretion in the Presence of Brefeldin A in the Filamentous Fungus Termitomyces clypeatus

  • Banik, Samudra Prosad;Pal, Swagata;Chowdhury, Sudeshna;Ghorai, Shakuntala;Khowala, Suman
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권4호
    • /
    • pp.412-420
    • /
    • 2011
  • Secretion of cellobiase occurred in a brefeldin A (BFA) uninhibited manner in the filamentous fungus Termitomyces clypeatus. Fluorescence confocal microscopy revealed that application of the drug at a concentration of 50 ${\mu}g$/ml caused arrest of Spitzenkorper assembly at the hyphal tip. This resulted in greater than 30% inhibition of total protein secretion in the culture medium. However, the cellobiase titer increased by 17%, and an additional 13% was localized in the vacuolar fraction en route secretion. The secretory vacuoles formed in the presence of the drug were also found to be bigger (68 nm) than those in the control cultures (40 nm). The enzyme secreted in the presence and absence of BFA revealed a single activity band in both cases in native PAGE and had similar molecular masses (approx. 120 kDa) in SDS-PAGE. The BFA enzyme retained 72% of native glycosylation. It also exhibited a higher stability and retained 98% activity at $50^{\circ}C$, 93.3% activity at pH 9, 63.64% activity in the presence of 1M guanidium hydrochloride, and 50% activity at a glucose concentration of 10 mg/ml in comparison to 68% activity, 75% activity, 36% activity, and 19% activity for the control enzyme, respectively. The observations collectively aimed at the operation of an alternative secretory pathway, distinct from the target of brefeldin A, which bypassed the Golgi apparatus, but still was able to deliver the cargo to the vacuoles for secretion. This can be utilized in selectively enhancing the yield and stability of glycosidases for a successful industrial recipe.

하악 무치악 환자에서 Parallel guide KIT®를 이용한 임플란트 식립 및 Locator 어태치먼트를 이용한 임플란트 피개의치 수복증례 (The implant retained overdenture by Locator attachments on the edentulous mandible using Parallel guide KIT® : a case report)

  • 김혜란;김준엽;양홍서;박상원;임현필;윤귀덕;박찬;신진호
    • 구강회복응용과학지
    • /
    • 제33권1호
    • /
    • pp.55-62
    • /
    • 2017
  • 무치악 환자를 수복할 때 임플란트 피개의치를 이용한 치료법은 전통적인 총의치의 문제점인 저작시 동통, 의치의 부족한 유지와 안정을 포함하는 기능저하 문제 등을 해결할 수 있는 방법이다. $Locator^{(R)}$ (Zest Anchors LLC, Espandido, USA) 어태치먼트는 임플란트 피개의치에 사용되는 어태치먼트 중 수직적으로 필요한 공간이 가장 적고, 나일론 부품에 따라 유지력 조절이 용이하다. 하지만 Ball이나 Bar에 비해 기능시 부품의 마모로 유지력이 빠르게 감소하는 특징이 있어 가급적 임플란트 간 각도가 최소가 되도록 식립하려는 노력이 필요하다.

Numerical and experimental study of multi-bench retained excavations

  • Zheng, Gang;Nie, Dongqing;Diao, Yu;Liu, Jie;Cheng, Xuesong
    • Geomechanics and Engineering
    • /
    • 제13권5호
    • /
    • pp.715-742
    • /
    • 2017
  • Earth berms are often left in place to support retaining walls or piles in order to eliminate horizontal struts in excavations of soft soil areas. However, if the excavation depth is relatively large, an earth berm-supported retaining system may not be applicable and could be replaced by a multi-bench retaining system. However, studies on multi-bench retaining systems are limited. The goal of this investigation is to study the deformation characteristics, internal forces and interaction mechanisms of the retaining structures in a multi-bench retaining system and the failure modes of this retaining system. Therefore, a series of model tests of a two-bench retaining system was designed and conducted, and corresponding finite difference simulations were developed to back-analyze the model tests and for further analysis. The tests and numerical results show that the distance between the two rows of retaining piles (bench width) and their embedded lengths can significantly influence the relative movement between the piles; this relative movement determines the horizontal stress distribution in the soil between the two rows of piles (i.e., the bench zone) and thus determines the bending moments in the retaining piles. As the bench width increases, the deformations and bending moments in the retaining piles decrease, while the excavation stability increases. If the second retaining piles are longer than a certain length, they will experience a larger bending moment than the first retaining piles and become the primary retaining structure. In addition, for varying bench widths, the slip surface formation differs, and the failure modes of two-bench retained excavations can be divided into three types: integrated failure, interactive failure and disconnected failure.

Quantitative analysis of retained austenite in Nb added Fe-based alloy

  • Kwang Kyu Ko;Jin Ho Jang;Saurabh Tiwari;Hyo Ju Bae;Hyo Kyung Sung;Jung Gi Kim;Jae Bok Seol
    • Applied Microscopy
    • /
    • 제52권
    • /
    • pp.5.1-5.10
    • /
    • 2022
  • The use of Pipelines for long-distance transportation of crude oil, natural gas and similar applications is increasing and has pivotal importance in recent times. High specific strength plays a crucial role in improving transport efficiency through increased pressure and improved laying efficiency through reduced diameter and weight of line pipes. TRIP-based high-strength and high-ductility alloys comprise a mixture of ferrite, bainite, and retained austenite that provide excellent mechanical properties such as dimensional stability, fatigue strength, and impact toughness. This study performs microstructure analysis using both Nital etching and LePera etching methods. At the time of Nital etching, it is difficult to distinctly observe second phase. However, using LePera etching conditions it is possible to distinctly measure the M/A phase and ferrite matrix. The fraction measurement was done using OM and SEM images which give similar results for the average volume fraction of the phases. Although it is possible to distinguish the M/A phase from the SEM image of the sample subjected to LePera etching. However, using Nital etching is nearly impossible. Nital etching is good at specific phase analysis than LePera etching when using SEM images.