• 산업기술연구
• /
• 제25권A호
• /
• pp.23-30
• /
• 2005

The capacity spectrum method(CSM) can be used for the evaluation of inelastic maximum response of structures and has been recently used in the seismic design using the incorporation of pushover analysis and response spectrum method. To efficiently evaluate seismic performance of multi-degree-of freedom(MDOF) bridge structures, it is important that the equivalent response of MDOF bridge structures should be calculated. To calculate the equivalent response of MDOF system, equivalent responses are obtained by using Song method, Fajfar method and Calvi method. Also, those responses are applied to CSM method and seismic performance of bridge according to the ESDOF method are compared and evaluated straightforwardly.

• 한국지진공학회논문집
• /
• 제25권1호
• /
• pp.33-42
• /
• 2021

The design response spectrum presented in the seismic design standard reflects the characteristics of the tectonic environment at a site. However, since the design response spectrum does not represent the ground motion with a specific earthquake magnitude or distance, input ground motions for response history analysis need to be selected reasonably. It is appropriate to use observed ground motions recorded in Korea for the seismic design. However, recently recorded ground motions in the Gyeongju (2016) or Pohang (2017) earthquakes are not compatible with the design response spectrum. Therefore, it is necessary to convert the recorded ground motion in Korea to a model similar to the design response spectrum. In this study, several approaches to adjust the spectral acceleration level at each period range were tested. These are the intrinsic and scattering attenuation considering the earthquake environment, magnitude, distance change by the green function method, and a rupture propagation direction's directivity effect. Using these variables, the amplification ratio for the representative natural period was regressed. Finally, the optimum condition compatible with the design response spectrum was suggested, and the validation was performed by converting the recorded ground motion.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.27-36
• /
• 2020

이 논문의 목적은 말뚝식 계류시설에 대해 현행 실무에서 주로 적용하고 있는 응답스펙트럼 해석법에서 표준설계응답스펙럼의 적용성에 대해 연구하는 것이다. 이를 위하여 다양한 지층조건을 고려한 Proshake 1차원 부지응답을 수행하여 현행 표준설계응답스펙트럼과 비교하고, Abaqus를 활용한 지반-말뚝 모델링으로 시간이력해석을 수행하여 지반-말뚝 동적거동 특성을 분석하였으며, 잔교시설이 설치되는 경사지반에 대해 Abaqus를 활용한 2차원 부지응답해석을 수행하여 응답스펙트럼의 기준면 선정방안을 검토하였다. 연구 결과 말뚝식 계류시설의 지반-말뚝 동적거동 특성과 경사지반의 특성을 고려할 경우 현행 표준설계응답스펙트럼의 적용성에 문제가 있으며 개선이 필요하다는 것을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.707-714
• /
• 2009

The design response spectrum generally used in Korea is decided by the site coefficients determined by deterministic methodology, while it is based on probabilistic seismic hazard analysis. The design response spectrum has to be made using probabilistic method which includes uncertainties of ground motions and ground properties for coincide with probabilistic methodology of seismic hazard analysis. In this study probabilistic site coefficients were developed, which were defined by the results of site response analysis using a set of ground motion that was compatible with present seismic hazard map. The design response spectrum defined by probabilistic seismic coefficients resulted in lower spectrum in long period area and larger spectrum in short period area. Also, the maximum spectral accelerations in site class D and site class E were lower than one in site class C while in the previous design response spectrum the maximum spectral acceleration increased from site class A to E.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.631-638
• /
• 2006

This paper considers the nonlinear direct spectrum method to estimate seismic performance of mixed building structures without iterative computations, given dynamic property $T_1$ from stiffness skeleton curve and nonlinear pseudo acceleration $A_{1y}$ and/or ductility ratio $\mu$ from response spectrum. Nonlinear response history analysis has been performed and analysed with various earthquakes for evaluation of correctness and confidence of nonlinear direct spectrum method.

• Structural Engineering and Mechanics
• /
• 제32권1호
• /
• pp.179-191
• /
• 2009

A stochastic response spectrum method is proposed for simple evaluation of the structural response of an actively controlled aseismic structure. The response spectrum is constructed assuming a linear structure with an active mass damper (AMD) system, and an earthquake wave model given by the product of a non-stationary envelope function and a stationary Gaussian random process with Kanai-Tajimi power spectral density. The control design is executed using a linear quadratic Gaussian control strategy for an enlarged state space system, and the response amplification factor is given by the combination of the obtained statistical response values and extreme value theory. The response spectrum thus produced can be used for simple dynamical analyses. The response factors obtained by this method for a multi-degree-of-freedom structure are shown to be comparable with those determined by numerical simulations, demonstrating the validity and utility of the proposed technique as a simple design tool. This method is expected to be useful for engineers in the initial design stage for structures with active aseismic control.

• Structural Engineering and Mechanics
• /
• 제64권4호
• /
• pp.473-485
• /
• 2017

An isolated building, composed of superstructure and isolation system which have very different damping properties, is typically non-classical damping system. This results in inapplicability of traditional response spectrum method for isolated buildings. A multidimensional response spectrum method based on complex mode superposition is herein introduced, which properly takes into account the non-classical damping feature in the structure and a new method is developed to estimate velocity spectra from the commonly used displacement or pseudo-acceleration spectra based on random vibration theory. The error of forced decoupling method, an approximated approach, is discussed in the viewpoint of energy transfer. From the base-isolated benchmark model, as a numerical example, application of the procedure is illustrated companying with comparison study of time-history method, forced decoupling method and the proposed method. The results show that the proposed method is valid, while forced decoupling approach can't reflect the characteristics of isolated buildings and may lead to insecurity of structures.

• 대한토목학회논문집
• /
• 제36권1호
• /
• pp.1-11
• /
• 2016

현 국내 외의 설계기준들은 인공지진파에 의해 계산된 응답스펙트럼이 설계응답스펙트럼보다 작은 값의 수가 5개 이내일 경우 설계응답스펙트럼을 포괄 한다고 규정하고 있다. 현 설계의 문제점을 확인하기 위하여 설계기준을 만족하는 5개의 각기 다른 특성을 가진 인공지진파를 사용하여 교각에 대한 시간이력해석을 수행하고, 부재력을 정량적으로 평가하였다. 설계기준을 만족하는 인공지진파일지라도 구조물의 고유주기와 유사한 주기에서 계산된 응답스펙트럼이 설계응답스펙트럼보다 작을 경우 시간이력해석을 통한 내진의 안전성을 확보하지 못함을 확인하였다. 따라서 본 연구에서는 스펙트럼 가속도 값이 설계응답스펙트럼보다 모든 주기에서 큰 값을 갖는 인공지진파를 생성하는 기법을 이중 수정함수를 적용하여 제안하였다. 또한 제안된 기법에 의해 작성된 인공지진파가 국내 외의 기준들의 적합성을 만족하는지 검토하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.159-168
• /
• 1999

In seismic analysis, there are two main ways - uniform load method and dynamic analysis, dynamic analysis can be divided into response spectrum analysis and time history analysis. In case of which get the complexion of the vibration with 3-axis of coordinate direction in each mode of free vibration mode happened owing to complication of the shape, 3-dimensional dynamic analysis is recommended to perform as multi-mode spectral analysis in standard specification for highway bridge. The purpose of this study is to understand the dynamic behavior by performing multi-mode seismic analysis according to responses analysis and time history anal)'sis in using record of earthquake. In accordance with the criterion of seismic design as defined in standard specification for highway bridge by using modified records of the El Centre and Coyote Lake earthquake, response spectrum was constructed by using the tripartite logarithmic plot. The 3-span continuous space truss bridge was selected as model of numerical analysis. As the result performed time history analysis and analysis of response spectrum for the model of numerical analysis, the result of time history analysis was slightly larger than that of response spectrum analysis. This coincide with the tendency of the result came from the analysis when using a jagged response spectrum analysis, This coincide with the tendency of the result came from the analysis when using a jagged response spectrum for a single excitation. In the Process of performing these two analysis. response spectrum analysis is more effective than time history analysis in saving times in analyzing data.

• 한국지진공학회논문집
• /
• 제10권4호
• /
• pp.55-66
• /
• 2006

본 연구에서는 강성골격곡선으로부터 산정한 구조물의 초기 탄성진동주기 $T_1$와 응답스트럼으로부터 산정한 비선형 유사가속도 $A_{1y}/g$ 및 연성비 ${\mu}$를 사용하여, 반복적인 계산과정 없이 복합구조물의 내진성능을 평가하는 비선형직접스펙트럼법(NDSM)을 고려한다. 다양한 지진과 복합구조물에 대한 NDSM의 신뢰성과 실용성을 비선형시각이력해석(NRHA) 결과와 비교 검토하였다. 본 연구의 결론은 다음과 같다. (1) NDSM은 강성골격곡선으로부터 기본진동주기와 비선형 항복강도를 구하면, 비선형 응답스펙트럼으로부터 직접적으로 구조물의 비선형 최대응답을 산정할 수 있는 실용적인 방법으로 사료된다. (2) NDSM의 응답을 정산해와 비교한 결과, 대부분의 모델이 단순평균의 관점에서 전체 해석모델 중 3/4이 약 20% 이하의 오차를 나타내었고, 일반적으로 비선형시각이력해석의 응답보다 크게 산정되는 것으로 나타났다.