KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Generation of Artificial Time History Covering Design Response Spectrum by Two Modification Functions

이중 수정함수 적용을 통한 설계응답스펙트럼 포괄 인공지진파의 생성

  • Received : 2015.07.09
  • Accepted : 2015.12.30
  • Published : 2016.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

The domestic and foreign seismic design codes have specified that time history covers design response spectrum when the response spectrum, which calculated from the time history, is smaller than the design response spectrum at five points or less. In order to verify the design codes, time history analysis for a pier was performed by using five artificial time histories conforming design code with various characteristics and its member forces were evaluated according to them. It was confirmed from analysis results that, regardless of the conformity to design code requirement, seismic design using the artificial time histories could not guarantee earthquake resistant design if the response spectrum from them is lower than design response spectrum at the similar period to the natural frequency of structure. Thus, the time history generating method to make its acceleration response spectrum to be greater than design response spectrum at all period was proposed by two modification function in this study. It was also verified whether time histories from the proposed method satisfy the seismic design codes or not.

현 국내 외의 설계기준들은 인공지진파에 의해 계산된 응답스펙트럼이 설계응답스펙트럼보다 작은 값의 수가 5개 이내일 경우 설계응답스펙트럼을 포괄 한다고 규정하고 있다. 현 설계의 문제점을 확인하기 위하여 설계기준을 만족하는 5개의 각기 다른 특성을 가진 인공지진파를 사용하여 교각에 대한 시간이력해석을 수행하고, 부재력을 정량적으로 평가하였다. 설계기준을 만족하는 인공지진파일지라도 구조물의 고유주기와 유사한 주기에서 계산된 응답스펙트럼이 설계응답스펙트럼보다 작을 경우 시간이력해석을 통한 내진의 안전성을 확보하지 못함을 확인하였다. 따라서 본 연구에서는 스펙트럼 가속도 값이 설계응답스펙트럼보다 모든 주기에서 큰 값을 갖는 인공지진파를 생성하는 기법을 이중 수정함수를 적용하여 제안하였다. 또한 제안된 기법에 의해 작성된 인공지진파가 국내 외의 기준들의 적합성을 만족하는지 검토하였다.

Keywords

References

  1. Abrahamson, N. A. (1992). "Non-stationary spectral matching." Seismological research letters, Vol. 63, No. 1, p. 30.
  2. Choi, D. H. and Lee, S. H. (2003). "Multi-damping earthquake design spectra-compatible motion histories." Nuclear Engineering and Design, Vol. 226, No. 3, pp. 221-230. https://doi.org/10.1016/j.nucengdes.2003.08.004
  3. Gasparini, D. A. and Vanmarcke, E. H. (1976). "Simulated Earthquake Motions Compatible with Prescribed Response Spectra." Publication No. 76-4. Department of Civil Engineering, Massachusetts Institute of Technology.
  4. Kaul, M. K. (1978). "Spectrum-consistent time-history generation." ASCE J. Eng., Mech. EM4, pp. 781-788.
  5. Korea Electric Power Industry Code, KEPIC STB (2005). "Seismic analysis and seismic capacity evaluation of nuclear facilities." 2005 Edition and 2008 Supplement.
  6. Lee, H. H., Han, S. W. and Lee, L. H. (1999). "Selection of earthquake ground motion for time history analysis." Architectural Institute of Korea, Vol. 15, No. 6, pp. 53-60.
  7. Lee, S. H. (2009). "Enhanced techniques for seismic analysis of nuclear power facilities incorporating response-spectrum-compatible and spatially incoherent ground motion input." Ph.D. Dissertation, Hanyang University.
  8. Lee, S. H. and Choi, D. H. (2006). "Generation of target PSD function compatible with design response spectrum." Proceedings of EESK Conference, Vol. 10, pp. 637-644.
  9. Lilhanand, K. and Tseng, W. S. (1988). "Development and application of realistic earthquake time histories compatible with multiple damping design spectra." Proceeding of the 9th WCEE, Vol. II, pp. 819-824.
  10. Linda, A. A. and Norman, A. (2010). "An improved method for nonstationary spectral matching." Earthquake Spectra, Vol. 26, No. 3, pp. 601-617. https://doi.org/10.1193/1.3459159
  11. National Disaster management institute (1998). Study on the Seismic Design Policies and Criteria(I) (in Korean).
  12. Park, H. G. and Chung, H. K. (2007). "Incorporating genetic algorithms into the generation of artificial accelerations." Journal of the Earthquake Engineering Society of Korea, Vol. 11, No. 2, pp. 1-9.
  13. U.S NRC (1973a). "Design response spectra for seismic design of nuclear power plants." Regulatory Guide 1.60, Rev. 1.
  14. U.S NRC (1973b). "Damping values for seismic design of nuclear power plants." Regulatory Guide 1.60, Rev. 1.
  15. U.S NRC (1978). "Development of floor design response spectra for seismic design of floor supported equipment or components." Regulatory Guide 1.122, Rev. 1.
  16. U.S NRC (1989). "Seismic design parameter." SRP 3.7.1, Rev. 2.