• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.409-412
• /
• 1996

In this paper, the response characteristics of organic gases were investigated by using quartz crystal microbalance(Q.C.M) with different polymeric sensitive materials. The new linear parameter was discussed in order to develope gas sensing system using neural network and pattern recognition. We analyzed the response characteristics by the area of resonant frequency shift of quartz crystal, which mean affinities of organic gases for polymeric sensitive firm. The experimental results shows that the parameter made by the area of frequency shift which was linear with injection amount of organic gases has possibility to be used for pattern recognition and neural network. And they have different normalized pattern.

• Journal of Society of Preventive Korean Medicine
• /
• v.18 no.3
• /
• pp.81-90
• /
• 2014

Objective : We performed a clinical study to investigate pattern characteristics in persistent allergic rhinitis depending on Korean Medicine pattern questionnaire items as a pattern identification diagnostic tool. Method : 32 patients with persistent allergic rhinitis were asked to interview with doctor of Korean Medicine and perform the 4 pattern questionnaires(Cold-Heat Pattern, Phlegm Pattern, Yin Deficiency pattern, bloodstasis pattern). Then, we analyzed the response rate of each pattern questionnaires. Results : After diagnosis of Korean Medicine Doctor's pattern identification, 17 individual items have higher response rate, 7 of 17 items have a common tendency in allergic rhinitis. The other 8 of 10 items belong to Lung qi deficiency cold and Lung-spleen qi deficiency group, these have higher tendency of deficiency. In bloodstasis pattern questionnaires, we don't decide the tendency of patients with allergic rhinitis. Conclusion : The result may provide that we don't use Korean Medicine pattern questionnaires as a major tool in the pattern identification of allergic rhinitis. Continuous studies are needed to develop the standardized pattern identification diagnostic tool.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.200-206
• /
• 2020

In this paper, we propose a broadband beamforming method using the Spatial Response Variation (SRV) which is defined to measure the fluctuation of the array spatial response within the desired frequency band. By applying the SRV to regularization term, we achieve a good quality main beam width variation less than 1 degree within the desired frequency band. In design experiments, we show that the proposed method is better than the existing method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5605-5623
• /
• 2016

We propose a face recognition method that utilizes the LCP face descriptor. The proposed method applies a LoG mask to extract a face contour response, and employs the LCP algorithm to produce a binary pattern representation that ensures high recognition performance even under the changes in illumination, noise, and aging. The proposed LCP algorithm produces excellent noise reduction and efficiency in removing unnecessary information from the face by extracting a face contour response using the LoG mask, whose behavior is similar to the human eye. Majority of reported algorithms search for face contour response information. On the other hand, our proposed LCP algorithm produces results expressing major facial information by applying the threshold to the search area with only 8 bits. However, the LCP algorithm produces results that express major facial information with only 8-bits by applying a threshold value to the search area. Therefore, compared to previous approaches, the LCP algorithm maintains a consistent accuracy under varying circumstances, and produces a high face recognition rate with a relatively small feature vector. The test results indicate that the LCP algorithm produces a higher facial recognition rate than the rate of human visual's recognition capability, and outperforms the existing methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.11
• /
• pp.739-746
• /
• 2015

Several damage counting methods can be applied for the fatigue issues of a ground vehicle system using strain data and acceleration data is partially used for a high cyclic loading case. For a vibration test, acceleration data is, however, more useful than strain one owing to the good nature of signal-to-random ratio at acceleration response. The test severity can be judged by the fatigue damage and the pseudo-damage from the acceleration response stated in ISO-16750-3 is one of sound solutions for the vibration test. The comparison of fatigue damages, derived from both acceleration and strain, are analyzed in this study to determine the best choice of fatigue damage over multi-spectral input pattern. Uniaxial excitation test was conducted for a notched simple specimen and response data, both acceleration and strain, are used for the comparison of fatigue damages.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1460-1478
• /
• 2020

This paper proposes a novel anti-collision protocol for large-scale RFID tags identification, named Bi-response Collision Tree Protocol (BCT). In BCT, two group of tags answer the reader's same query in two response-cycles respectively and independently according to the bi-response pattern. BCT improves the RFID tag identification performance significantly by decreasing the query cycles and the bits transmitted by the reader and tags during the identification. Computation and simulation results indicate that BCT improves the RFID tag identification performance effectively, e.g. the tag identification speed is improved more than 13.0%, 16.9%, and 22.9% compared to that of Collision Tree Protocol (CT), M-ary Collision Tree Protocol (MCT), and Dual Prefix Probe Scheme (DPPS) respectively when tags IDs are distributed uniformly.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.1-8
• /
• 2014

In this paper, SOA Current and Temperature Driver which consisted of LabVIEW programming part capable of current and temperature transient response pattern design, DAQ module for analog voltage in&out, and voltage to current converting chips has realized. The output current(possible to 3A) from the Driver to SOA was clearly constant without ripple and also showed no variance until 1mA unit for a long time operation. The temperature of TEC took several seconds to reach a set temperature, and were maintained stably within ${\pm}^0.1{\circ}C$ for several hours. The proposed Driver can replace the previous high cost SOA Drivers for wavelength swept lasers fully and provides the convenience of transient response design capability for current and temperature.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1342-1348
• /
• 2008

One important objective of the electricity market is to decrease the price by ensuring stability in the market operation. Interconnected to this is another objective; namely, to realize sustainable consumption of electricity by equitably distributing the effects and benefits of participating in the market among all participants of the industry. One method that can help achieve these objectives is the ^{(R)}$demand-response program, - which allows for active adjustment of the loadage from the demand side in response to the price. The demand-response program requires a customer baseline load (CBL), a criterion of calculating the success of decreases in demand. This study was conducted in order to calculate undistorted CBL by analyzing the correlations between such external or seasonal factors as temperature, humidity, and discomfort indices and the amounts of electricity consumed. The method and findings of this study are accordingly explicated.

• The Mathematical Education
• /
• v.46 no.2 s.117
• /
• pp.227-237
• /
• 2007

This research analyzes students' response types in the creativity assessment by using pattern block, geoboard, and pantomino. 74 students from third grade to sixth grade participated in this research. 15 minutes were given to pattern block and geoboard questions. 74 students showed 393 answers in pattern block question and 590 answers in geoboard question. In pantomino, 20 minutes were given and 54 students showed 443 types of answers. The results are as follows: First, in the students' responses, tendency of using particular piece or figure, which presents conjoining in a piece selection and positioning, showed strongly. For example, usage of hexagon and trapezoid pieces were higer in pattern block and usage of L, P, and I pieces were higer in pentomino. Second, it is confirmed that creativity's subordinate factors, fluency, flexibility, and originality, are separate from each other. To illustrate, in pattern block, three students', who showed 11 types of responses in fluency, flexibility responses were each 5, 6, and 8 types. Specially, among those studenys, only one could achieve a point in originality. Third, students' response types categorized in this research could be used for a bae-data to mark grades on originality.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.11a
• /
• pp.279-282
• /
• 2002

자율신경계 반응은 인간의 각성을 측정하는 변수가 될 수 있다(황민철 외, 2001). 본 연구에서는 자율신경계 반응만으로 인간의 2차원 감성 분류를 할 수 있는지를 살펴보았다. 5명의 피험자에게 대중가요나 효과음 등과 같은 다양한 청각자극을 제시하여 감성을 유발한 후, 자율신경계의 반응을 3가지 생리신호(GSR, SKT, PPG)를 통해 측정하여 반응 패턴을 분석하였다. 결과적으로, 자율신경계 반응 패턴은 각성/이완뿐만 아니라 쾌/불쾌간 감성 구분의 가능성을 확인할 수 있었다.