• Wind and Structures
• /
• v.10 no.4
• /
• pp.383-398
• /
• 2007

The paper describes a study of the effects of structural coupling on the wind-induced response of twin tall buildings connected by a skybridge. Development of a dual high-frequency force balance used in wind tunnel investigation and background information on the methodology employed in analysis are presented. Comparisons of the wind-induced building response (rooftop acceleration) of structurally coupled and uncoupled twin buildings are provided and the influence of structural coupling is assessed. It is found that the adverse aerodynamic interference effects caused by close proximity of the buildings can be significantly reduced by the coupling. Neglecting of such interactions may lead to excessively conservative estimates of the wind-induced response of the buildings. The presented findings suggest that structural coupling should be included in wind-resistant design of twin tall buildings.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.6
• /
• pp.38-46
• /
• 2003

Perceived crowding is known as a necessary method to evaluate social carrying capacity in recreational settings. But according to the results of previous research, perceived crowding, use density, and satisfaction have shown weak and indirect correlations. The theory of visitors’ adjustment is one of several possible explanations for this poor relation. But the validity of the visitors’ adjustment theory has not been not inspected clearly. Therefore, the purposes of this study are to understand visitors’ adjustment theory and to examine visitors’ adjustment to the overuse of recreational settings. Study hypotheses were formulated through literature review and related to visitors’ adjustment in recreation density. Pour hypotheses were established and inspected with the case study, i.e., Rationalization : Visitors’ satisfaction isn't related to use density in recreation setting, 2) Product-shift : Preference norm is related to current use density, 3) Self-selection : Visitors’ satisfaction for the use level is generally high, and 4) Displacement : Norm interference is related to willingness to revisit. The case study was conducted during May and June,2001. According to the results of this survey, visitors adjust to overuse of recreation setting through rationalization and product shift (hypotheses l/2 acceptance). Current use density isn't related to visitors’ satisfaction and willingness to revisit (see table 3). And visitors’ preference norm is modified by situation (see table 4). Visitors’ satisfaction and willingness to revisit don't show a high correlation but moderately high (see table 5, hypothesis 3 acceptance). Differences between visitors’ preference norm and current use density is norm interference. Norm interference isn't related to willingness to revisit (see table 7). Therefore, the norm interference concept is not a useful method to explain visitors’ adjustment to the degree of overuse in a recreational setting (hypothesis 4 rejection). As for future directions, the following are proposed: 1) correctly understanding and reestablishing the visitor norm and norm interference concept, 2) introducing a composite research method to monitor visitors’ behavior and survey visitors’ attitudes and coping responses. These efforts would be helpful in the Planning and management of recreational settings to improve the quality of visitors’ experiences.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.11-20
• /
• 2016

In this paper, we propose the channel estimation scheme for Long Term Evolution-Advanced (LTE-A) downlink system. The proposed scheme uses the fast fourier transform (FFT) interpolation scheme for the user moving at a high speed. The FFT interpolation scheme converts the channel frequency response obtained from least square (LS) or minimum mean square error (MMSE) channel estimation scheme to time domain channel impulse response by taking the inverse FFT (IFFT). After windowing the channel response in the time domain, we can obtain the channel frequency response by taking the FFT. We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-A downlink system. Simulation results show that the proposed channel estimation scheme can improve signal-to-noise-plus-interference ratio (SINR), throughput, and spectral efficiency of conventional system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.9
• /
• pp.924-933
• /
• 2007

An impeller is a important part of turbo-machinery. It has a set of twisted surfaces because it consists of many blades. Five-axis machining is required to produce a impeller because of interference between tool and workpiece. It can obtain good surface integrity and high productivity. This paper proposes finish cutting method for machining impeller with 5-axis machining center and optimization of cutting condition by response surface method. Firstly, cutting methods are selected by consideration of operation characteristics. Secondly, response factors are determined as cutting time and cutting error for prediction of productivity. Experiments are projected by central composite design with axis point. Thirdly, regression linear models are estimated as single surface in the leading edge and as dual surface in the hub surface cutting. Finally, cutting conditions are optimized.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.678-682
• /
• 1996

The plasma-deposited polymer thin films at platinum surface were investigated as materials blocking access of chloride ions to the platinum surface and preventing their interference with the Nernstian responce of platinum. In the presence of chloride ions, the pH response of a naked platinum was remarkably affected. By comparison of pH responses of coated and uncoated platinum-wire electrodes immersed in solutions with chloride ions, it was found that toluene and ethylbenzene plasma films could improve the pH response of platinum. The pH response of coated platinum electrodes may be explained by the ability of protons, by virtue of their small size, to move through the polymer matrix to the platinum surface.

• KSTLE International Journal
• /
• v.1 no.1
• /
• pp.59-62
• /
• 2000

This paper deals with an experimental study on the dynamic response of an elastomeric oil seal when the interferences between shaft and lip as well as the dynamic eccentricities are present. The dynamic response of seal lip in oil seals was observed with the aid of an image processing apparatus. The temperature of the seal lip edge, friction torque and the dynamic sealing gap between shaft and lip are measured at different conditions of the initial interference and the shaft eccentricity, The data were simultaneously measured under dynamic conditions. Experimental results show that, as the shaft speed is increased, S/e$_{d}$ has nearly reached a constant asymptotic value fur a certain range of shaft speeds. The results indicate that the gap separation between shaft and lip is provided due to the shaft eccentricity because the seal lip cannot follow quickly the radial displacements with increasing shaft speed.d.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.73-82
• /
• 2005

This paper describes shock waveform synthesis methods for a shock response spectnlm over a short time interval with which intereference between parts within a test item is increased to perform a sufficient shock test for damage or malfunction which may be caused by the interference between parts, and a digital filter for obtaining a shock response history required for the shock waveform synthesis and a digital inverse filter for restoration by inversely using the digital filter. The time at which the maximax value occurs in the response history is detected in order to establish a delay time which is one of the parameters in the wavelet, on the condition that the natural frequency of SDOF system with a Q (quality factor) of 10 equals to the wavelet frequency of the zero delay wavelet input. A shock response spectrum over a short time interval and an abrupt change in the acceleration for an instant are illustrated as features of the synthesized waveform.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.3
• /
• pp.32-38
• /
• 2001

Multi-carrier data transmission system performance is mostly limited by Inter- symbol-interference that is caused by a dispersive characteristic of the transmission channel. In order to enhance the system performance to meet the service requirements of local access, the channel impulse response shortening method incorporated with a channel frequency response compensation method is proposed. For a fast and efficient implementation of the equalizer proposed, Kalman and LMS algorithms are successively used. To verify the channel equalization performance, a set of computer simulation is performed on a filter bank based multitone system operating in a typical high-speed local area data transmission environment. The results showed us a comparable signal-to-interference improvement over the conventional multitone equalization scheme.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.658-662
• /
• 2004

This paper proposes an orthogonal reception structure for OS/SS communication with time-shifted m-sequences, and compares the performances of the proposed and conventional receiver. This structure provides two important characteristics to reference user signal with not only increment of auto-correlation value but also cancel of the cross-correlation value out to zero between the reference user and other user signals. In addition, the structure can be easily implemented with the conventional receiver adding an additional integrator path in parallel and an adder that sums the conventional path output and the new path output signal. Hence, the proposed structure can be applied for channel impulse response measurement, and efficiently used for multi-user interference signal cancellation and channel capacity increment by flexible structural inter-working operation, connection or disconnection, of the new path to conventional receiver structure.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.400-404
• /
• 2015

In this paper, we study for direction of arrival MUSIC spatial spectrum algorithm in order to desired signal estimation in spatial. Proposal MUSIC spatial spectrum algorithm in paper use model error and Bayesian method to estimation on correct target position. Receiver array response vector using adaptive array antenna use Bayesian method, and target position estimate to update weight value with model error method. Target's signal estimation of desired direction of arrival in this paper apply weight value of signal covariance matrix for array response vector after removing incident signal interference and noise, respectively. Though simulation, we analyze to compare proposed method with general method.