References
- Nelik, Lev, 1999, 'Centrifugal and Rotary Pumps : Fundamentals with Applications,' CRC Press
- Johanna, S., Frederic, M., Jean, Max Redonnet and Walter, R., 2005, 'Analysis of Improved Positioning in Five-Axis Ruled Surface Milling Using Envelope Surface,' Computer-Aided Design, Vol. 37, Issue 10, pp. 989-998 https://doi.org/10.1016/j.cad.2004.09.002
- Lauwers, B., Dejonghe, P. and Kruth J. P., 2003, 'Optimal and Collision Free Tool Posture in Five-Axis Machining Through the Tight Integration of Tool Path Generation and Machine Simulation,' Computer-Aided Design, Vol. 35, Issue 5, pp. 421-432 https://doi.org/10.1016/S0010-4485(02)00045-3
- Choi, B. K., Park, J. W. and Jun, C. S., 1993, 'Cutter-location Data Optimization in 5-Axis Surface Machining,' Computer-Aided Design, Vol. 25, No. 6, pp. 377-386 https://doi.org/10.1016/0010-4485(93)90033-K
- Li, S. X. and Jerard, R. B., 1994, '5-axis Machining of Sculptured Surfaces with a Flat-end Cutter,' Computer-Aided Design, Vol. 26, No. 3, pp. 165-178 https://doi.org/10.1016/0010-4485(94)90040-X
- Jensen, C. G., Red, W. E. and Pi, J., 2002, 'Tool Selection for Five-axis Curvature Matched Machining,' Computer Aided Design, Vol. 34, pp. 251-266 https://doi.org/10.1016/S0010-4485(01)00086-0
- Chen, S. L., Wang, W. T., 2001, 'Computer Aided Manufacturing Technologies for Centrifugal Compressor Impellers,' Journal of Materials Processing Technology, Vol. 115, pp. 284-293 https://doi.org/10.1016/S0924-0136(01)00828-7
- Suresh, P. V. S., Venkateswara, Rao P. and Deshmukh S. G., 2002, 'A Genetic Algorithmic Approach for Optimization of Surface Roughness Prediction Model,' International Journal of Machine Tools and Manufacture, Vol. 42, Issue 6, pp. 675-680 https://doi.org/10.1016/S0890-6955(02)00005-6
- Lim, P., Lee, H. K. and Yang, G. E., 2005, 'High Speed Machining of the Thin Surface Parts Using Liquid Metal and Selection of Machining Condition by Latin Square Method,' Journal of Korean Society of Precision Engineering, Vol. 22, No. 10, pp. 99-106
- Wang, M.Y. and Chang, H. Y., 2004, 'Experimental Study of Surface Roughness in Slot End Milling AL2014-T6,' International Journal of Machine Tools & Manufacture, Vol. 44, pp. 51-57 https://doi.org/10.1016/j.ijmachtools.2003.08.011
- Park, S. H., 2001, 'Morden Design of Experiments,' Minyongsa, pp. 305-329
- Park, S. H., 2003, 'Regression Analysis,' Minyongsa, pp. 175-318
Cited by
- Structural Optimization for Small Scale Vertical-Axis Wind Turbine Blade using Response Surface Method vol.16, pp.4, 2013, https://doi.org/10.5293/kfma.2013.16.4.022
- Baseplate Design to Improve Swaging Performance of Actuator in a HDD vol.33, pp.8, 2009, https://doi.org/10.3795/KSME-A.2009.33.8.760
- Analytical Prediction of Heating Temperature to Manufacture Rotor with Shrink Fit for Ultra High Speed Motor According to Change Dimension of Rotor vol.33, pp.9, 2009, https://doi.org/10.3795/KSME-A.2009.33.9.963
- Static and Dynamic Analysis and Optimization Design of 40,000-rpm High-Speed Spindle for Machine Tools vol.37, pp.1, 2013, https://doi.org/10.3795/KSME-A.2013.37.1.105
- Enhancement of J estimation for typical nuclear pipes with a circumferential surface crack under tensile load vol.24, pp.3, 2010, https://doi.org/10.1007/s12206-010-0114-0