• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.2
• /
• pp.57-65
• /
• 2008

The improvement of the performance in laser radar simulation requires fast retrievals of the spatial locations and attributes of objects in response to the laser signals of the simulators. Since the data used in simulation are complex 3D objects such as terrain, buildings and vehicles, and are of large sizes, commonly used 3D modeling tools are not suitable for this use. We proposed a method to store such 3D objects in a database, perform required queries and integrate with visualization tools. We showed the processes for the data modeling based on 3D topological concepts and then building a spatial DBMS. Also, we illustrated the process for accessing and visualizing the stored data using VRML and performed test computations using some laser signal data. With further enhancement on data modeling and LOD problems in visualization, the proposed method will be practically applied in different situations including laser simulation.

• Fisheries and Aquatic Sciences
• /
• v.1 no.2
• /
• pp.269-275
• /
• 1998

Spider crabs, Libinia emarginata, were eyestalk-ablated unilaterally and bilaterally to manipulate endogenous methyl farnesoate (MF) to increase during the embryogenesis. Endogenous MF were measured weekly over the embryogenesis of the crab, using HPLC with the aids of GC/MS and MS database (CAS 010485-70-8) for the identification of the hormone. Initial MF titers both in the hemolymph and embryos of intact control were at bottom levels and the hormone concentrations kept unchanged (p<0.05), reflecting physiological unnecessaries of the hormone in the embryogenesis. Eyestalk ablation significantly stimulated the crabs to increase endogenous MF in both tissues (p<0.0l). In the response of the embryos to the increased MF, no growth stimulations were observed, at least, in the first part of embryogenesis. The increased mortalities and immature sheddings of embryos resulted from the crabs under the influence of elevated MF in both tissues, instead, suggesting that the elevated MF against the crab's requirement blocked the normal developmental process of the crab embryos. These data can give crustacean endocrinologists some insights to understand the effects of the hormone on the crustacean reproduction studied previously in which JH analogs ambiguously affected the crustacean reproduction depending on the reproductive stages. The data also can give shrimp aquaculturists some implication of a possible generation of unfavorable shrimp seeds attributed to elevated egg MF originated from their eyestalk-ablated mother shrimp.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.6
• /
• pp.818-825
• /
• 2012

Keratinases are exciting keratin-degrading enzymes; however, there have been relatively few studies on their immobilization. A keratinolytic protease from Chryseobacterium sp. kr6 was purified and its partial sequence determined using mass spectrometry. No significant homology to other microbial peptides in the NCBI database was observed. Certain parameters for immobilization of the purified keratinase on chitosan beads were investigated. The production of the chitosan beads was optimized using factorial design and surface response techniques. The optimum chitosan bead production for protease immobilization was a 20 g/l chitosan solution in acetic acid [1.5% (v/v)], glutaraldehyde ranging from 34 g to 56 g/l, and an activation time between 6 and 10 h. Under these conditions, above 80% of the enzyme was immobilized on the support. The behavior of the keratinase loading on the chitosan beads surface was well described using the Langmuir model. The maximum capacity of the support ($q_m$) and dissociation constant ($K_d$) were estimated as 58.8 U/g and 0.245 U/ml, respectively. The thermal stability of the immobilized enzyme was also improved around 2-fold, when compared with that of the free enzyme, after 30 min at $65^{\circ}C$. In addition, the activity of the immobilized enzyme remained at 63.4% after it was reused five times. Thus, the immobilized enzyme exhibited an improved thermal stability and remained active after several uses.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.4
• /
• pp.67-76
• /
• 2015

The purpose of this study is to set a direction for the development of men's underwear after analyzing current applications for patent regarding men's special-purpose underwear. In terms of a research method, the disclosed patents and utility models were investigated using the patent information database provided by Korea Institute of Patent Information (KIPRIS, http://www.kipris.or.kr). For this, the patents applied from 1990 to October 2015 were targeted. The keywords used for patent search were 'men's underwear' and 'men's special-purpose underwear.' When searched by the keywords above, a total of 1,089 cases were found. Except for expired or cancelled ones, 243 cases were investigated. Then, annual application trends, current registrations on literature records, classification of utility model right holders and contents by topic were analyzed. In terms of data analysis, frequency analysis, crosstabulation analysis and multiple response analysis were conducted, using SPSS 18.0. The results found the followings: In terms of annual application trends, the number of applications for patent started to gradually increase since 2007. Since 2011, it has rapidly increased. In terms of the number of patent registrations, literature registration was far higher than utility model registration. In terms of application rights, 'individually registered (58.8%)' was higher than 'registered by the organization (41.2%).' Among 243 cases, 'underwear (58%)' was the highest, followed by 'men's underwear-related items (29.2%)' and 'thermals (8.2%).' According to analysis on the details of the patent applied for men's underwear, 'penis-scrotum separation' was most focused, followed by 'disposable product' 'airy features,' 'scrotum protection' and 'structure of underwear.'

• Journal of Gastric Cancer
• /
• v.11 no.4
• /
• pp.212-218
• /
• 2011

Purpose: Intracorporeal anastomosis during laparoscopic gastrectomy is becoming increasingly prevalent. However, selection of the anastomosis method after laparoscopic distal gastrectomy is equivocal because of a lack of technical feasibility and safety. We compared intracorporeal gastroduodenostomy with gastrojejunostomy using linear staplers to evaluate the technical feasibility and safety of intracorporeal anastomoses as well as its' minimally invasiveness. Materials and Methods: Retrospective analyses of a prospectively collected database for gastric cancer revealed 47 gastric cancer patients who underwent laparoscopic distal gastrectomy with either intracorporeal gastroduodenostomy or gastrojejunostomy from March 2011 to June 2011. Perioperative outcomes such as operation time, postoperative complication, and hospital stay were compared according to the type of anastomosis. Postoperative inflammatory response was also compared between the two groups using white blood cell count and high sensitivity C-reactive protein. Results: Among the 47 patients, 26 patients received gastroduodenostomy, whereas 21 patients received gastrojejunostomy without open conversion or additional mini-laparotomy incision. There was no difference in mean operation time, blood loss, and length of postoperative hospital stays. There was no statistically significant difference in postoperative complication or mortality between two groups. However, significantly more staplers were used for gastroduodenostomy than for gastrojejunostomy (n=6) than for gastroduodenostomy and (n=5). Conclusions: Intracorporeal anastomosis during laparoscopic gastrectomy using linear stapler, either gastroduodenostomy or gastrojejunostomy, shows comparable and acceptable early postoperative outcomes and are safe and feasible. Therefore, surgeons may choose either anastomosis method as long as oncological safety is guaranteed.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.6
• /
• pp.488-498
• /
• 2015

This paper presents the dynamic model of an AUV called HW200 for underwater surveillance. The mathematical model of HW200 is briefly introduced, considering its shape. The maneuvering coefficients were initially estimated using empirical formulas and a database of vehicles with similar shapes. A motion simulator, based on Simulink of Mathworks, was developed to evaluate the mathematical model of the vehicle and to tune the maneuvering coefficients. The parameters were finely tuned by comparing the experimental results and simulated responses generated with the simulator by applying the same control inputs as the experiment. The velocity of HW200 in the tuning process was fixed at a constant forward speed of 1.83 m/s. Simulations with variable speed commands were conducted, and the results showed good consistency in the motion response, attitude, and velocity of the vehicle, which were similar to those of the experiment even under the speed variation. This paper also discusses the feasibility of its application to a model-based integrated navigation system (INS) using the auxiliary information on the velocities generated by the model.

• The KIPS Transactions:PartB
• /
• v.8B no.6
• /
• pp.625-632
• /
• 2001

The electronic stores have realized that they need to understand their customers and to quickly response their wants and needs. To be successful in increasingly competitive Internet marketplace, recommender systems are adapting data mining techniques. One of most successful recommender technologies is collaborative filtering (CF) algorithm which recommends products to a target customer based on the information of other customers and employ statistical techniques to find a set of customers known as neighbors. However, the application of the systems, however, is not very suitable for seasonal products which are sensitive to time or season such as refrigerator or seasonal clothes. In this paper, we propose a new adjusted item-based recommendation generation algorithms called the exponentially weighted collaborative filtering recommendation (EWCFR) one that computes item-item similarities regarding seasonal products. Finally, we suggest the recommendation system with relatively high quality computing time on main memory database (MMDB) in XML since the collaborative filtering systems are needed that can quickly produce high quality recommendations with very large-scale problems.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.221-232
• /
• 2001

Due to rapid advance of wireless communication technology, demand on data services in mobile environment is gradually increasing. Caching at a mobile client could reduce bandwidth consumption and query response time, and yet a mobile client must maintain cache consistency. It could be efficient for the server to broadcast a periodic cache invalidation report for cache consistency in a cell. In case that long period of disconnection prevents a mobile client from checking validity of its cache based solely on the invalidation report received, the mobile client could request the server to check cache validity. In doing so, some schemes may be more efficient than others depending on the number of available channels and the mobile clients involved. In this paper, we propose new cache consistency schemes, effects, efficient especially (1) when channel capacity is enough to deal with the mobile clients involved or (2) when that is not the case, and evaluate their performance.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.359-366
• /
• 2013

In this paper, we studied how the data obesity can affect in which the response speed of database gradually slows down. Our research is performed by analyzing how the game data infrastructure is well-formed. Although there are a variety of ways to evaluate to measure the level of infrastructure, we performed with real information system. We analyzed data obesity by comparing the entity-relationship models between the products of real game information system and newly modeled databases. We could find data obesity is over 60% among overall average of game information system. It shows that 45% higher than standard obesity which is 15%. In this paper, data redundancy rate after performing the procedure of the data modeling was 41% resulting in an improvement of 23% compared to 64% of an existing model.

• Steel and Composite Structures
• /
• v.20 no.1
• /
• pp.127-145
• /
• 2016

Composite column design is strongly influenced by the computation of the critical buckling load, which is very sensitive to the effective flexural stiffness (EI) of the column. Because of this, the behaviour of a composite column under lateral loading and its response to deflection is largely determined by the EI of the member. Thus, prediction models used for composite member design should accurately mirror this behaviour. However, EI varies due to several design parameters, and the implementation of high-strength materials, which are not considered by the current composite design codes of practice. The reliability of the design methods from six codes of practice (i.e., AS 5100, AS/NZS 2327, Eurocode 4, AISC 2010, ACI 318, and AIJ) for composite columns is studied in this paper. Also, the reliability of these codes of practice against a serviceability limit state criterion are estimated based on the combined use of the test-based statistical procedure proposed by Johnson and Huang (1997) and Monte Carlo simulations. The composite columns database includes 100 tests of circular concrete-filled tubes, rectangular concrete-filled tubes, and concrete-encased steel composite columns. A summary of the reliability analysis procedure and the evaluated reliability indices are provided. The reasons for the reliability analysis results are discussed to provide useful insight and supporting information for a possible revision of available codes of practice.