• Earthquakes and Structures
• /
• v.10 no.3
• /
• pp.563-588
• /
• 2016

In this study, solution models are proposed to obtain code-compatible ground motion record sets which can be used for both uni-directional and bi-directional dynamic analyses. Besides scaled, unscaled ground motion record sets are obtained to show the utility and efficiency of the solution models. For scaled ground motion sets the proposed model is based on hybrid HS-Solver which integrates heuristic harmony search (HS) algorithm with the spreadsheet Solver add-in. For unscaled ground motion sets HS based solution model is proposed. Design spectra defined in Eurocode-8 for different soil types are selected as target spectra. The European Strong Motion Database is used to get ground motion record sets. Also, a sensitivity analysis is conducted to evaluate the effect of different HS solution parameters on the solution accuracy. Results show that the proposed solution models can be regarded as efficient ways to develop scaled and unscaled ground motion sets compatible with code-based design spectra.

• Steel and Composite Structures
• /
• v.42 no.4
• /
• pp.477-487
• /
• 2022

The shear stiffness of headed-stud shear connectors has no unified definition due to the nonlinear characteristics of its load-slip relationship. A unified framework was firstly adopted to develop a general expression of shear load-slip equation for headed-stud shear connectors varying in a large parameter range based on both force and energy balance. The pre- and post-yield shear stiffness were then determined through bilinear idealization of proposed shear load-slip equation. An updated and carefully selected push-out test database of 157 stud shear connectors, conducting on studs 13~30mm in diameter and on concretes 30~180 MPa in cubic compressive strength, was used for model regression and sensitivity analysis of shear stiffness. An empirical calculation model was also established for the stud shear stiffness. Compared with the previous models through statistical analysis, the proposed model demonstrates a better performance to predict the shear load-slip response and stiffness of the stud shear connectors.

• Structural Engineering and Mechanics
• /
• v.88 no.3
• /
• pp.209-220
• /
• 2023

This study investigates the effectiveness of tuned mass dampers (TMDs) in controlling vibrations in low-rise reinforced concrete buildings. It examines both linear and nonlinear behaviors of concrete structures subjected to strong ground motions from the PEER database. The research follows the ASCE 7-16 provisions to model structural nonlinearity. Additionally, the study explores the effect of varying TMD mass ratios on the performance of these systems in real-world conditions. The findings emphasize the importance of accounting for structural nonlinearity in low-rise buildings, highlighting its significant influence on the controlled response under severe seismic excitations. The study suggests including nonlinear analysis in seismic design practices and recommends customizing TMD designs to optimize vibration control. These recommendations have practical implications for enhancing the safety and effectiveness of seismic design practices for low-rise buildings.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3801-3807
• /
• 2023

Outcomes of the project "Comprehensive Verification of the FALCON Code for Calculation of Nuclear Fuel Temperature" relating to calculation of fuel temperature during relatively fast thermal transients are presented. Good prediction capabilities of the FALCON MOD01 code coupled with the GRSW-A code are shown as applied to the data of the TF3 and TF5 tests from the Transient Temperature Experiment IFA-507. The IFA-507 related dataset of the OECD/NEA International Fuel Performance Experiments (IFPE) Database is extended by the reconstructed dynamics of the axial power distribution in the rods during the transient phase of the experiment. Based on the code calculation, the time constant of the thermal fuel response to a power transient is estimated.

• ETRI Journal
• /
• v.46 no.3
• /
• pp.473-484
• /
• 2024

We introduce a machine learning-based web application to help travel agents plan a package tour schedule. K-nearest neighbor (KNN) classification predicts the optimal tourists' dwelling time based on a variety of information to automatically generate a convenient tour schedule. A database collected in collaboration with an established travel agency is fed into the KNN algorithm implemented in the Python language, and the predicted dwelling times are sent to the web application via a RESTful application programming interface provided by the Flask framework. The web application displays a page in which the agents can configure the initial data and predict the optimal dwelling time and automatically update the tour schedule. After conducting a performance evaluation by simulating a scenario on a computer running the Windows operating system, the average response time was 1.762 s, and the prediction consistency was 100% over 100 iterations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.375-382
• /
• 2011

There is no system to obtain the basic data and proceed data and user input interface is complex, thus there are some limitation to utilize the oil spill prediction model. It is difficult to build the scientific response strategy in order to respond oil spill accident rapidly because it is impossible to operate the oil spill prediction model any time. In this study, the optimum operational system for oil spil prediction model has been developed considering the present system. External real time data has been linked because of impossibility of building all basic data and minimum database has been build in this study. Through this data system, real time oil spill prediction model can be utilized. And the user interface has been designed to reduce the error of the interface between user and model and the output interface has been proposed to analyze the result of modeling at multidimensional aspect. While the system for oil spill prediction model as the result of this study has some uncertainties because of depending on external data, the thing that we can predict oil spill using operate the model rapidly as soon as the accident occurred can be meaning in the response field.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.4
• /
• pp.17-35
• /
• 2016

Earthquake-induced disasters are often more severe in locations with soft soils than firm soils or rocks due to differences in ground motion amplification. On a regional scale, such differences can be estimated by spatially predicting subsurface soil thickness over the entire target area. In general, soil deposits are generally deeper in coastal or riverside areas than in inland regions. In this study, a coastal metropolitan area, Incheon, was selected to assess site effects and provide information on seismic hazards. Spatial prediction of geotechnical layers was performed for the entire study area within the GIS framework. Approximately 7,000 existing borehole drilling data in the Incheon area were gathered and archived into the GIS Database (DB). In addition, surface geotechnical data were acquired from a walkover survey. Based on the built geotechnical DB, spatial zoning maps of site-specific seismic response parameters were created and presented for use in a regional seismic strategy. Site response parameters were performed to determine site coefficients for seismic design over the entire target area and compared with each other. Site classifications and subsequent seismic zoning were assigned based on site coefficients. From this seismic zonation case study in Incheon, we verified that geotechnical GIS-DB can create spatial zoning maps of site-specific seismic response parameters that are useful for seismic hazard mitigation particularly in coastal metropolitan areas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.661-674
• /
• 2000

The main memory DBMS(MMDBMS) efficiently supports various database applications that require high performance since it employs main memory rather than disk as a primary storage. In this paper, we discuss theexperiences obtained in developing the index manager of the Tachyon, a next-generation MMDBMS. The indexmanager is an essential sub-component of the DBMS used to speed up the retrieval of objects from a largevolume of a database in response to a certain search condition. Previous research efforts on indexing proposed various index structures. However, they hardly dealt with the practical issues occured in implementating an index manager on a target DBMS. In this paper, we touch these issues and present our experiences in developing the index manager on the Tachyon as solutions. The main issues touched are (1) compact representation of an indexentry, (2) support of variable-length keys, (3) support of multiple-attribute keys, (4) support of duplicated keys,(5) definition of external APls, (6) concurrency control, and (7) backup and recovery. We believe that ourcontribution would help MMDBMS developers highly reduce their trial-and-errors.

• Journal of Broadcast Engineering
• /
• v.7 no.2
• /
• pp.145-152
• /
• 2002

As the number of digital images available to users is exponentially growing due to the rapid development of digital technology, content-based image retrieval (CBIR) has been one of the most active research areas. A variety of image retrieval methods have been proposed, where, given an input query image, the images that are similar to the input are retrieved from an image database based on low-level features such as colors and textures. However, most of the existing retrieval methods did not consider the case when an input query image is a part of a whole image in the database due to the high complexity involved in partial matching. In this paper, we present an efficient method for partial image matching by using the histogram distribution relationships between query image and whole image. The proposed approach consists of two steps: the first step prunes the search space and the second step performs block-based retrieval using partial image matching to rank images in candidate set. The experimental results demonstrate the feasibility of the proposed algorithm after assuming that the response tune of the system is very high while retrieving only by using partial image matching without Pruning the search space.

• Research in Community and Public Health Nursing
• /
• v.11 no.1
• /
• pp.67-79
• /
• 2000

In recent years, the recipients of the services of the health centers in Korea have been shifted from individual sick persons to families as a unit. As a result, the home visiting care records which are all filled out manually, will be increased. Since there is virtually no increase in the number of community health nurses, the CHNs are required to work more efficiently. One of the ways to make the CHNs' work more efficient is to reduce recording time by using a computer. However, a computer system that can manage the families as a unit has not yet been developed. In response to this need, we developed a database system that can be utilized in home visiting care service. The family assessment data is collected. diagnosed. and evaluated according to the family diagnosis classification. The system for family diagnosis consists of seven areas. Those areas are family structure. maintenance of the family system, interaction and interchange. support. coping and adaptation, health management. and housing environment. The areas of the family diagnosis consists of 99 items in all. We expect the following from this system. First. the CHNs will be able to identify family problems more easily. Second. the community's health level can be confirmed by the statistics the system produces. Thirdly, the CHNs' nursing services will be cost effective via reduced recording time. Finally, the family problems of the sick individuals which have been neglected under the health system oriented on individual persons can be effectively managed.