• 제목/요약/키워드: resistor type

검색결과 141건 처리시간 0.033초

Chua 회로에서의 Bifurcation 과 Attractor (Bifurcation and Attractor from Chua's circuit)

  • 배영철;고재호;임화영
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 B
    • /
    • pp.664-666
    • /
    • 1995
  • Chua's circuit is a simple electronic network which exhibits a variety of bifurcation and attractors. The circuit consists of two capacitors, an inductor, a linear resistor and a nonlinear resistor. This paper describes the implementation for a practical op amp of Chua's circuit. In experiment results, 1 periodic motion, 2 periodic motion, rossler type attractors, stranger chaotic attractor periodic window and limit cycle are shown, which are coincide with computer simulation.

  • PDF

안정적 유출수질의 연속 하수처리를 위한 혐기성 멤브레인 필터와 통합된 미생물연료전지의 성능 평가 (Performance of Microbial Fuel Cell Integrated with Anaerobic Membrane Filter for Continuous Sewage Treatment with Stable Effluent Quality)

  • 이윤희;어성욱
    • 한국물환경학회지
    • /
    • 제29권6호
    • /
    • pp.808-812
    • /
    • 2013
  • A new type of microbial fuel cell (MFC) with anaerobic membrane filter was designed to produce bioelectricity and to treat domestic sewage at relatively high organic loading rate (OLR) of $6.25kgCOD/m^3/day$ and short hydraulic retention time (HRT) of 1.9 h. A following aeration system was applied to ensure effluent water quality in continuous operation. Glucose was supplemented to increase the influent concentration of domestic sewage. Influent substrate of 95% was removed via the MFC and following aeration system and the corresponding maximum power density was $25.6mW/m^3$. External resistor of $200{\Omega}$ and air-cathode system contributed better MFC performance comparing to $2000{\Omega}$ and dissolved oxygen as a catholyte.

확산저항을 이용한 실리콘 압력 센서 (Silicon Pressure Sensors Using Diffused Resistors)

  • 권태하;이우일
    • 대한전자공학회논문지
    • /
    • 제23권3호
    • /
    • pp.364-369
    • /
    • 1986
  • Silicon diaphragms, 10 and 20 \ulcorner-thick and 1x1 mm\ulcornerarea, have been fabricated by means of the electrochemical P-N junction etch-stop technique. The P-type diffused resistors were formed on the diaphragm, and the piezoresistance effect was examined. It was been found that the fractional variation of the resistance is dependent on the diaphragm thickness, resistor location, and resistor length, etc. The 1.2 k\ulcornerfull-brige pressure sensor with 10\ulcorner-thick diaphragm exhibits a pressure sensitivity of 42 \ulcorner/V\ulcornermHg with a temperature coefficient of 2.3 mmHg/\ulcorner, and shows a good linearity in the pressure range from 0 to 300 mmHg.

  • PDF

광도전성저항을 이용한 열선유속계의 하드웨어적 온도보상에 관한 연구 (Hardware temperature compensation technique for hot-wire anemometer by using photoconductive cell)

  • 이신표;고상근
    • 대한기계학회논문집B
    • /
    • 제20권11호
    • /
    • pp.3666-3675
    • /
    • 1996
  • A new hardware temperature compensation method for hot-wire anemometer is investigated and an analog compensating circuit is proposed in this article. A photoconductive cell is introduced here as a variable resistor in the anemometer bridge and the linearized output of a thermistor is used to monitor the input of the photoconductive cell. In contrast with the conventional method, any type of temperature sensor can be used for compensation if once the output of thermometer varies linearly with temperature. So the present technique can diversify the compensating means from a conventional passive compensating resistance to currently available thermometers. Because the resistance of a photoconductive cell can be set precisely by adopting a stabilizing circuit whose operation is based on the integration function of the operational amplifier, the accuracy of compensation can be enhanced. As an example of linearized thermometer, thermistor sensor whose output is linearized by a series resistor was used to monitor the fluid temperature variation. Validation experiment is conducted in the temperature ranged from 30 deg. C to 60 deg. C and the velocity up to 40 m/s. It is found that the present technique can be adopted as a compensating circuit for anemometer and hot-wire type airflow meter.

이중편파와 FSS를 적용한 정류안테나의 변환효율 분석에 관한 연구 (A Study on the Conversion Efficiency of Rectenna using Dual-Polarization and FSS Method)

  • 윤동기;박양하;김관호;이영철
    • 한국전자파학회논문지
    • /
    • 제10권5호
    • /
    • pp.747-756
    • /
    • 1999
  • 본 논문에서는 2뾰GHz 이중편파 정류안테나를 설계. 제작하고 제작된 정류안테나의 방향변화에 따른 마이크로파-DC 변환효율 특성과 FSS(Frequency Selective Surface)를 적용하여 정류안테나의 정류회로에서 발 생되는 고조파 성분(Harmonics)의 감소 특성을 분석하였다. 본 논문에서 설계. 제작된 각각의 이중편파 정류안테나의 마이크로파 DC 변환효율을 측정한 결과 다이폴 형태는 $360\Omega$의 부하일 때 69.1 %. 패치 형태는 $340\Omega$일 때 75.4 %의 최대 변환효율 특성을 나타내었다. 각 각 최적의 부하 저항을 가칠 때 $0~180^{\circ}$방향 변화에 따른 RF-DC 변환효율 변동특성은 다이폴 형태는 $\pm20%$, 패치 형태는 $\pm5%$를 나타내었다 FSS를 적용했을 때 통과대역에서의 손실은 1 dB이하, 차단대역에서의 감쇄는 20 dB 이상이 되었고‘ 정류안테나의 마이크로파-DC 변환효율은 $\pm2%$정도 변화되어 양호한 특성을 나타내었다.

  • PDF

0.18 ㎛ CMOS 공정을 이용한 저 전력 1 Ms/s 12-bit 2 단계 저항 열 방식 DAC (A Low-Power 1 Ms/s 12-bit Two Step Resistor String Type DAC in 0.18 ㎛ CMOS Process)

  • 유명섭;박형구;김홍진;이동수;이성호;이강윤
    • 전자공학회논문지
    • /
    • 제50권5호
    • /
    • pp.67-74
    • /
    • 2013
  • 본 논문은 무선 센서분야를 위한 1MS/s rate의 저 전력 12-bit 2단계 저항 열 DAC를 제시하고 있다. 2단계 저항 열 구조를 채택함으로써 복잡함을 줄이고, 소비 전력을 최소화 하고 변환속도를 증가 시킬 수 있었다. 이 칩은 $0.18{\mu}m$ CMOS 공정에서 제작 되었으며, Die 면적은 $0.76{\mu}m{\times}0.56{\mu}m$ 이다. 1.8V의 공급 전압으로부터 측정된 전력 소비는 1.8 mW 이다. 샘플링 주파수가 1MHz 이하에서 측정된 동적 동작범위(Spurious-Free Dynamic Range: SFDR)은 70dB 이다.

저항을 이용한 프로판-공기 혼합가스의 점화한계 개선에 관한 연구 (A Study on the Improved Ignition Limit with Resistor for Propan-air Mixture Gas)

  • 이춘하;오종용;옥경재;지승욱;이광식;심광렬
    • 한국화재소방학회논문지
    • /
    • 제18권1호
    • /
    • pp.18-23
    • /
    • 2004
  • 본 논문은 IEC형 불꽃점화 시험장치를 이용하여 저압 유도회로의 최소 점화한계를 프로판-공기 5.25 Vol.%의 혼합 가스에 대하여 실험적으로 구하였으며, 또한 유도회로의 인덕턴스 L에 안전소자로서 저항을 병렬접속 하였을 경우 프로판-공기 5.25 Vol.%의 혼합 가스에 대한 점화한계 개선효과를 고찰하였다. 그 결과, 최소 점화한계는 전류의 크기에 따라 좌우되었다. 또한, 전원으로부터 공급되는 에너지는 인덕턴스에 우선 축적되고, 그 초과분의 에너지가 폭발성 가스의 점화원으로 작용하였다. 점화한계 개선효과는 인덕턴스가 300mH일 때, 최고 330%의 개선효과가 나타났으며 인덕턴스가 클수록 점화한계 개선효과가 크게 나타났다. 또한 병렬로 접속한 저항의 크기가 적을수록 점화한계 개선 효과가 크다. 본 연구결과는 본질안전 방폭형 전기기기의 연구개발을 위한 기본자료로 활용할 수 있을 뿐만 아니라 이들 기기의 방폭 성능에 대한 시험자료로도 활용이 가능할 것으로 사료된다.

Characteristics of $\pi$-type attenuators using Ti(N) thin film resistors

  • Cuong, Nguyen Duy;Kim, Dong-Jin;Kang, Byoung-Don;Yoon, Soon-Gil
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.50-50
    • /
    • 2007
  • We report the effect of the film thickness on electrical properties of Ti(N) film resistors. The applications of titanium nitride thin film resistor in $\Pi$-type attenuators are also characterized. As film thickness decreases from 100 to 30 nm, temperature coefficient of resistance significantly decreases from -60 to -148 ppm/K, while sheet resistance increases from 37 to $270\;{\Omega}/{\square}$. The characterizations of 20dB-attenuators using thin film resistors are improved in comparison with those using thick film resistors. The $\Pi$-type attenuators using Ti(N) thin film resistors exhibit a attenuation of -19.94 dB and voltage standing wave ratio of 1.16 at a frequency of 2.7 GHz.

  • PDF

직류 전압/저항 비율 초정밀 측정기술 (Precision Measurement Technique of DC Voltage/Resistance Ratio)

  • 김규태;유광민
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제51권3호
    • /
    • pp.96-99
    • /
    • 2002
  • We developed 1:1 resistance ratio measurement system for precision measurement of a series-resistor type dc voltage divider. By using active guard technique and exchange technique, any leakage effects, which are one of the most critical error sources, were successfully removed. The best measurement uncertainty with the developed ratio measurement system was estimated to be approximately $10^{-8}\;for\;10\;k{\Omega}\;and\;100\;k{\Omega}$.