• 한국임상수의학회지
• /
• 제23권4권
• /
• pp.427-431
• /
• 2006

Pulse Doppler ultrasonographic evaluation was performed to investigate the resistive index (RI) of the Interlobar renal artery in 17 dogs (32 kidneys) which were diagnosed with an acute renal failure caused by ochratoxin-A and citrinin contaminated commercial diet. RI was investigated in 7 normal beagle dogs and recovered patients. The mean of RI was resulted as $0.69{\pm}0.04$ in normal dog, however, significantly (p<0.001) increased as $0.76{\pm}0.05$ in renal failure dog. But RI had no relationship with the results of blood chemistry, urine analysis, and excretory urographic image quality. From these results, even though the results of the renal function test were within a normal reference range, it was considered that RI index is more reliable to represent a damaged renal parenchyma, and may have the potential to be a useful clinical tool in monitoring of the renal function.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.518-520
• /
• 2004

In these days, there is a demand to develop fault current limiters(FCLs) to reduce excessive fault current and protect electrical equipments which are installed in the transmission and distribution power systems. We considered the resistive superconducting FCLs among the various kinds of FCLs. In this study, in order to develop the resistive superconducting FCL of 6.6kV 200A $3\phi$, we designed the new mask pattern for etching YBCO films by means of numerical analysis method, current limiting experiments and visualization of bubbles in films and investigated dielectric performance of the designed mask by using elecrtostatic numerical analysis method and breakdown experiments. We etched YBCO films by using the newly designed mask, connected the etched films in series and in parallel, and designed the 6.6kV resistive SFCL and then we observed the current limiting characteristics of the SFCL.

• 한국전기전자재료학회논문지
• /
• 제24권11호
• /
• pp.855-858
• /
• 2011

In this paper, in order to suppress unwanted current paths originating from adjacent cells in a passive crossbar array based on resistive random access memory (RRAM) without extrinsic switching devices, 1-diode type RRAM which consists of a 0.2% chromium-doped strontium titanate (Cr-$SrTiO_3$) film deposited on a silicon substrate, was proposed for high packing density, and intrinsic rectifying characteristics from the current versus voltage characteristics were successfully demonstrated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.80-84
• /
• 2008

We systematically investigated the resistive switching properties of thin $TiO_2$ films on Pt/Ti/$SiO_2$/Si substrates that were embedded with a Co ultra thin layer. An in-situ sputtering technique was used to grow both films without breaking the chamber vacuum. A stable bipolar switching in the current-voltage curve was clearly observed in $TiO_2$ films with an embedded Co ultra thin layer, addressing the high and low resistive state under a bias voltage sweep. We propose that the underlying origin involved in the bipolar switching may be attributed to the interface redox reaction between the Co and $TiO_2$ layers. The improved reproducible switching properties of our novel structures under forward and reverse bias stresses demonstrated the possibility of future non-volatile memory elements in a simple capacitive-like structure.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.691-708
• /
• 2018

An innovative Hybrid Passive Resistive configuration for Truss Girder Frames (HPR-TGFs) is introduced in the present study. The proposed system is principally consisting of Fluid Viscous Dampers (FVDs) and Buckling Restrained Braces (BRBs) as its seismic resistive components. Concurrent utilization of these devices will develop an efficient energy dissipating mechanism which is able to mitigate lateral displacements as well as the base shear, simultaneously. However, under certain circumstances which the presence of FVDs might not be essential, the proposed configuration has the potential to incorporate double BRBs in order to achieve the redundancy of alternative load bearing paths. This study is extending the modern Direct Displacement Based Design (DDBD) procedure as the design methodology for HPR-TGF systems. Based on a series of nonlinear time history analysis, it is demonstrated that the design outcomes are almost identical to the pre-assumed design criteria. This implies that the ultimate characteristics of HPR-TGFs such as lateral stiffness and inter-story drifts are well-proportioned through the proposed design procedure.

• Progress in Superconductivity
• /
• 제5권2호
• /
• pp.128-131
• /
• 2004

The resistive superconducting fault current limiters (SFCLs) are very attractive devices for the electric power network. But they have some serious problems when the YBCO thin films were used for the current limiting materials due to the in homogeneities caused by manufacturing process. When the YBCO films have some inhomogeneities, simultaneous quenches are difficult to achieve when the fault current limiting units are connected in series for increasing operating voltage ratings. Magnetic field application is one of the prospective way of inducing simultaneous quenches far the series-connected resistive FCL components. Magnetic field was typically generated by the fault current thorough a coil, which is connected to components of the fault current limiter in series, leaving the problem, which provides significant inductance to the power line and suppresses critical current density of the superconducting components. In this article we investigated the possible application of the protective current transformer (p-CT), which is available current source to the magnetic coil. This system inductively coupled to the circuit, therefore, remarkably reducing impedance to the circuit. The current by the protective current transformer was directly fed to the coil, generating magnetic field large enough to reduce critical current density of the components. This successfully induced simultaneous quenches of the series-connected resistive FCL components.

• 전자공학회논문지SC
• /
• 제43권6호
• /
• pp.27-32
• /
• 2006

전기 저항식 습도 센서를 이용하여 온도 보상된 습도계를 개발하였다. 개발된 습도계는 사인파 발생기, 대수 변환기, 정류기, 그리고 증폭기로 구성되며, 사용된 센서의 선형화와 온도 보상을 수행한다. 습도계의 동작 원리를 제시하였고, 실험 결과들을 이용하여 이론적인 예측의 타당성을 증명하였다. 실험 결과는 습도계의 변환 감도가 약 24.8 mV/%RH이고 변환 특성의 선형 오차가 30에서 80 %RH의 상대습도 범위에서 17.2 %보다 작다는 것을 보여준다. 실험 결과는 또, 출력 전압의 온도 계수가 22에서 $40^{\circ}C$의 온도 범위에서 $10149ppm/^{\circ}C$ 이하라는 것을 보여준다.

• 한국재료학회지
• /
• 제22권8호
• /
• pp.385-389
• /
• 2012

Significant improvements in the switching voltage distribution are required for the development of unipolar resistive memory devices using $MnO_x$ thin films. The $V_{set}$ of the as-grown $MnO_x$ film ranged from 1 to 6.2 V, whereas the $V_{set}$ of the oxygen-annealed film ranged from 2.3 to 3 V. An excess of oxygen in an $MnO_x$ film leads to an increase in $Mn^{4+}$ content at the $MnO_x$ film surface with a subsequent change in the $Mn^{4+}/Mn^{3+}$ ratio at the surface. This was attributed to the change in $Mn^{4+}/Mn^{3+}$ ratios at the $MnO_x$ surface and to grain growth. Oxygen annealing is a possible solution for improving the switching voltage distribution of $MnO_x$ thin films. In addition, crystalline $MnO_x$ can help stabilize the $V_{set}$ and $V_{reset}$ distribution in memory switching in a Ti/$MnO_x$/Pt structure. The improved uniformity was attributed not only to the change of the crystallinity but also to the redox reaction at the interface between Ti and $MnO_x$.

• 한국화재소방학회논문지
• /
• 제24권3호
• /
• pp.20-24
• /
• 2010

건축물의 화재발생 시 건축물 붕괴방지 및 인명의 피난시간 확보를 위하여 내화구조(내화피복재)를 시공하도록 하고 있으나 실제 규모와 가까운 내화시험의 특성으로 건축물 시공현장에서 내화구조(내화피복재)의 품질을 확인할 수 있는 현장품질방법이 부재하다. 따라서 근-적외선분광분석을 통하여 현장에서 적용할 수 있는 일치성 분석기법 연구를 통해 정확하고 간편한 과학적 내화구조현장관리 시험방법을 제시하고자 함.

• 한국초전도ㆍ저온공학회논문지
• /
• 제7권2호
• /
• pp.31-34
• /
• 2005

There are many kinds of high temperature superconducting (HTS) application using Bi-2223 tape which is the most commercialized HTS material. Also, resistive superconducting fault current limiters (SFCLs) have been developed using many kinds of superconducting material such as YBCO thin film, Bi-2212 bulk and so on. However, SFCL using Bi-2223 tape has never been developed. This paper deals with the feasibility study on SFCL using Bi-2223 wire. The over-current behaviors of Bi-2223 short-length sample were measured. To make the resistive SFCL, two small-scale bifilar winding modules using 7m Bi-2223 wire were fabricated; i.e. solenoid type bifilar coil and pancake type one. The short-circuit tests of the coils were successfully performed up to 16 V$_{rms}$ From these tests, the current limiting capabilities of Bi-2223 bifilar coils were confirmed and current limiting performances between two winding types were compared. In addition, the feasibility of resistive SFCL using another HTS wire, i.e. YBCO coated conductor, was also investigated.