• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1274-1279
• /
• 2011

The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.1
• /
• pp.59-68
• /
• 2011

Objectives : To investigate the knowledge and recognition level of fluorine by teaching career among class teachers, who are primarily responsible for oral health education, despite lack of expertise in oral health, by playing a model role for students through continuous contacts with them, and provide basic elementary data about accurate knowledge and how to correctly use fluorine remarkably effective in preventing dental caries. Methods : A self-administered survey was conducted with 539 teachers at 21 elementary schools in Jinhae City from September 1 to October 15, 2010, drawing the following conclusions. Results : 1. As for the channel for acquiring knowledge of oral health, the highest frequency was found in health programs for respondents with less than 9 years of career, in dental clinics for those with 20 to 29 years of career, and in PR booklets for those with 10 to 19 years and 30 years and longer of career. 2. Use of fluorine-containing toothpaste and fluorine spread is very effective and effective in preventing dental caries got 64.9%, 72.2%, 72.3%, 77.7% and 54.0%, 63.1%, 62.2%, 69.7%, respectively, among elementary school teachers with less than 9 years, 10 to 19 years, 20 to 29 years, and 30 years and longer of career. 3. Intake of fluoride and toothbrushing with fluoric solution is very effective and effective in preventing dental caries got 33.3%, 40.1%, 39.5%, 55.3% and 50.0%, 54.9%, 48.8%, 69.7%, respectively, among elementary school teachers with less than 9 years, 10 to 19 years, 20 to 29 years, and 30 years and longer of career. 4. Use of fluoric tablets is very effective and effective in preventing dental caries got 32.9%, 36.0%, 36.1%, 47.3%, respectively, among elementary school teachers with less than 9 years, 10 to 19 years, 20 to 29 years, and 30 years and longer of career. 5. Most of the elementary school teachers knew the fact that fluorine increases dental resistance to cavity and prevents bacterial growth but gave incorrect responses to properties of becoming basic nutrients or inducing recalcification. Conclusions : Various types of application of fluorine during the elementary-level childhood experiencing the most frequent dental caries will be very useful in improving oral health in the future. It is necessary to enable class teachers to get correct recognition of fluorine through supplementary and job training based on technical knowledge and various educational materials so that they, who are directly responsible for health management through continuous contacts with students, can understand how to correctly use fluorine and get accurate knowledge.

• The Korean Journal of Pesticide Science
• /
• v.19 no.2
• /
• pp.125-133
• /
• 2015

Entomopathogenic fungi have been studied to develop for biological control agents as an alternative to chemical control agents in insect pest management. Two Lepidopteran insects, Spodoptera exigua and Plutella xylostella, are serious insect pests infested various crops, but not effectively controlled by commercial chemical pesticides due to its high insecticide resistance. A fungal isolate was isolated from S. exigua larvae collected from green onion field in Andong, Korea. To identify the fungal isolate, 18srRNA sequence for internal transcribed spacer (ITS) and ${\beta}$-tubulin regions were sequenced. The ITS and ${\beta}$-tubulin sequence were highly matched to Beauveria bassiana and morphological characteristics also was fit to known B. bassiana. Finally, isolated fungus has identified as B. bassiana and named B. bassiana ANU1. The result of bioassay, median lethal concentrations were $2.7{\times}10^3$ and $0.9{\times}10^3conidia/ml$ and medial lethal times were 65.6 and 60.8 h to S. exigua and P. xylostella, respectively. B. bassiana ANU1 showed high pathogenicity to two insect pests from $20^{\circ}C$ to $30^{\circ}C$ at 50% relative humidity (RH) and more than 40% RH at $25^{\circ}C$ with $10^7conidia/ml$ of concentration.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.501-511
• /
• 2018

As a result of the recent revision of the 'Guideline for Installation and Management of Fire Prevention Facility in Road Tunnels', the thermal buoyancy has to be taken into account when calculating the capacity of jet fans for smoke control in tunnel fires. However, there is no detailed methodologies for considering thermal buoyancy, so further study is needed. In this study, the thermal buoyancy in the tunnel is calculated by 3-D numerical simulation to consider the thermal buoyancy in case of fire in tunnels, and the relationship between heat buoyancy and vehicle drag, And the method of calculating the capacity of the jet fan for smoke control in tunnels. According to the analysis results, heat buoyancy acts as a resistance force in the case of a down-slope tunnel, and the pressure rise of jet fan for smoke control is not simply determined by the value of heat buoyancy at the entrance of the tunnel and the value of the vehicle drag at the exit. And it is analyzed that it is necessary to carry out a comprehensive review according to the location of the fire vehicle in tunnels.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.9
• /
• pp.1236-1243
• /
• 2010

The aim of this study was to screen lactic acid bacteria for the fermentation of garlic and to assess the increase in inhibitory activity of garlic fermented against antibiotic-resistant pathogens for use as an animal feed supplement. We screened 45 strains of lactobacillus for the fermentation of garlic. Of these strains, 23 showed similar growth rates with or without allicin. Cultures of the 23 strains were mixed with an equivalent amount of garlic juice and incubated overnight at $37^{\circ}C$. The three strains with the lowest pH values were Lactobacillus paracasei KCTC 3169, L5 strain, and L. reuteri SW. Garlic juice fermented by the L5 strain more strongly inhibited antibiotic-resistant pathogenic bacteria than L. paracasei KCTC 3169, L. reuteri SW, or garlic juice itself. By examining carbohydrate utilization, morphologic properties and 16S rRNA gene sequences, we identified the L5 strain as Pediococcus pentosaceus and deposited it in the name of P. pentosaceus KACC 91419 into the Korea Agricultural Culture Collection. To identify the antimicrobial compound from the garlic filtrate fermented by P. pentosaceus KACC 91419, we fractionated P. pentosaceus KACC 91419 culture on a C18 column and checked the antimicrobial activity of fractions A6 to A10. Only fraction A9 showed inhibitory activity on Staphylococcus aureus. Comparing the mass spectra of the fractions with and without antimicrobial activity, we observed a single dominant product ion (m/z 157.99) from the fraction showing antimicrobial activity. Its molecular mass (157.99) was 2 atomic mass units less than that of allicin (162.02). This suggests that allicin might be converted to its derivative, which has antimicrobial activity, during fermentation by P. pentosaceus KACC 91419.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.82-92
• /
• 2020

Modern artworks are constructed using a variety of materials and techniques. Sculptures, which predominantly consist of metals, usually have different shapes and consist of different material mixtures. The structural and material properties of these sculptures are often controlled by conservation treatment methods. However, the application of existing treatment methods is challenging at times, indicating that more diverse treatment materials and techniques are necessary. Therefore, in this study, a treatment method that employs volatile corrosion inhibitor(VCI) powder, rather than an anti-corrosion solution, for the conservation and management of metal artworks was used. VCI powder and VCI films containing VCI powder were used, and the results obtained confirmed that both of them showed anti-corrosion effect. Only a slight change in the chromaticity of metal samples was observed, and compared to the untreated samples, the application of the VCI powder resulted in a decrease in the rate of corrosion by half. Moreover, VCI film tests revealed that comparing to the untreated or polyethylene film-treated samples, VCI film treatment resulted in a decrease in the occurrence of corrosion compounds. The contact angle, surface energy, and surface electrical resistance were measured, and the evaluation of these surface properties established the anti-corrosion effect of VCI. Additionally, direct application of VCI and VCI films on actual sculptures further confirmed the anti-corrosion effect of VCI.

• Journal of Animal Science and Technology
• /
• v.44 no.5
• /
• pp.617-624
• /
• 2002

Annual legume is being used as an important source of protein for farm animals and an ingredient for nitrogen fertilizers. There are, however, difficulties in selecting appropriate cultivar and forage management technique. The objective of this study is to select the best performing cultivars and evaluate a forage value on annual legume at two locations (Suwon and Sunghwan) for 1 year (1999${\sim}$2000). All cultivars shown a seedling vigor and lodging resistance of 8 rating or higher. Crimson and rose clover showed that they are appropriate for overwintering, but ;Laser; (35.9%) and 'Nitro'(9.1%) of persian clover variety did not overwinter well from 1999 to 2000. Flower stage was observed 4th of May for 'Tibbee', 6th of May for 'Contea' crimson clover, and 29th of April for 'Bolta balansa' rose clover. DM yield of a crimson clover 'Contea' (4,218kg/ha) was the highest among the legume forage. A crimson clover 'Tibbee' and rose clover 'Bolta balansa' also had a high production yield (3,874 and 3,828kg/ha). Calculations of relative feed value (RFV) based on the acid and neutral detergent fiber (ADF and NDF) of annual legume were over 125, which means that quality was high. According to the results of this study, crimson and rose clovers are recommended due to their high winter survival rate and high DM yield. Persian clover is not recommended because of a low overwintering rate at the Central region in Korea.

• Fisheries and Aquatic Sciences
• /
• v.23 no.1
• /
• pp.1.1-1.14
• /
• 2020

Background: Dietary protein requirements are dependent on a variety of factors and water temperature is one of the most important abiotic factors affecting protein requirement of fish. This study was, therefore, conducted to investigate effects of water temperature on dietary protein requirement of fry Heteropneustes fossilis which has high demand in most of the Asian markets. Methods: Quadruplicate groups of 30 fish per treatment (2.97 ± 0.65 cm; 5.11 ± 0.34 g) were fed seven isoenergetic diets (17.9 kJ g^-1 gross energy; 14.99 kJ g^-1 digestible energy) containing dietary protein levels ranging from 28 to 52% at two water temperatures (18 and 26 ℃). Experimental diets were fed to apparent satiation as semi-moist cakes thrice daily at 17:00, 12:00, and 17:30 h for 12 weeks. For precise information, various growth parameters, protein deposition, hematological parameters, metabolic enzymes, and stress response were analyzed, and effects of water temperature on dietary protein requirement was recommended on the basis of response from above parameters. Results: Groups held at 26 ℃ attained best growth, feed conversion, and protein deposition at 44% dietary protein indicating that temperature affected dietary protein requirement for optimum growth of H. fossilis fry and protein requirement seems to be satisfied with 44% dietary protein. Interestingly, interactive effects of both dietary protein levels and temperature were not found (P > 0.05). Fish reared at 18 ℃ had comparatively higher values for aspartate and alanine transferases than those reared at 26 ℃ water temperature which exhibited normal physiological value for these enzymes indicating that body metabolism was normal at this temperature. Hematological parameters also followed same pattern. Furthermore, fish reared at 26 ℃ water temperature exhibited more resistant to thermal stress (P < 0.05). The 95% maximum plateau of protein deposition data using second-degree polynomial regression analyses exhibited dietary protein requirement of fry H. fossilis between 40.8 and 41.8% of diet at 26 ℃ water temperature. The recommended range of dietary protein level and protein/digestible energy ratio for fry H. fossilis is 40.8-41.8% and 27.21-27.88 mg protein kJ^-1 digestible energy, respectively. Conclusions: Information developed is of high significance for optimizing growth potential by making better utilization of nutrient at 26 ℃ and, to develop effective management strategies for mass culture of this highly preferred fish species.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.650-656
• /
• 2018

The TFT-LCD industry is a kind of large-scale industrial Giant Microelectronics device industry and has a similar semiconductor process technology. Wet etching forms a relatively large proportion of the entire TFT process, but the number of published research papers on this topic is limited. The main reason for this is that the components of the etchant, in which the reaction takes place, are confidential and rarely publicized. Aluminum (Al) and copper (Cu), which have been used in recent years for the manufacture of large area LCDs, are very difficult materials to process using wet etching. Cu, a low-resistance material, can only be used in the wet etching process, and is used as a substitute for Al due to its high speed etching, low failure rate, and low power consumption. Further, the abnormal reaction of hydrogen peroxide ($H_2O_2$), which is used as an etching solution, requires additional piping and electrical safety devices. This paper proposes a method of minimizing the damage to the plant in the case of adverse reactions, though it cannot limit the adverse reaction of hydrogen peroxide. In recent years, there have been many cases in which aluminum etching equipment has been changed to copper. This paper presents a countermeasure against abnormal reactions by implementing safety PLC with a high safety grade.

• Weed & Turfgrass Science
• /
• v.6 no.4
• /
• pp.292-305
• /
• 2017

This paper provides the current status of weed science and prospects for the development of weed science based on the research trends presented at the 26th Asian Pacific Weed Science Conference in 2017. Approximately 458 researchers from 25 countries, including Korea, participated in the conference and presented 325 papers in 20 research areas. Major research topics were herbicide resistance, herbicide use, herbicide development, weed ecology, allelopathy, weed management, and exotic weeds. Particularly, there were many presentations and interesting to researchers about the development and use of new herbicides, such as florpyauxifen-benzyl ester, triafamone, fenquinotrione, and tolpyralate. Development of new herbicide formulations and spray methods were suggested as a solution for the population decline in rural area and low labor quality especially in Asia and Pacific regions. In future weedy rice and exotic weeds will be a serious problem in this area so we need to cooperate to make good technical and practical solutions.