• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.20-26
• /
• 2019

Purpose: Recently TF-adaptive movement is developed in order to increase the durability of TF files. The purpose of this study was to assess the effects of adaptive movement on durability and performance of twisted files. Materials and Methods: Resin blocks simulating artificial J-shape canals were used for this study. In TFC group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under continuous rotation 500 rpm/4.0 Ncm. In TFA group, TF-adaptive ML-1 (25/.08 size) files were used to prepare the canals under adaptive movement. After preparing each artificial canal, TF files were observed under dental microscope for assessing existence of unwinding, distortion, and fracture. If unwinding of flute was observed, the number of artificial canals until unwinding of flute occurs was recorded. Required time until instruments reach working length and distance of unwinded portion of files from D0 were measured. All test results were conducted by Mann-Whitney U test at a 0.05 level of significance. Results: No Ni-Ti instrument's separation was observed. Number of resin blocks until file unwinding happens and working time was significantly high in TFA group compared to TF group. Distance of distortion from D0 didn't show significant difference between TFA, TF groups. Conclusion: The number of resin blocks prepared until unwinding happens and working time were significantly high in TFA group. The location of unwinding showed no significant difference between 2 groups. Adaptive movement increased the number of canals prepared until unwinding occurs and working time of twisted files.

• Journal of Korean Society of Forest Science
• /
• v.12 no.1
• /
• pp.31-43
• /
• 1971

In order to examine the taxonomic difference between the type of Pinus parviflora S. et Z. native to the Dagelet Island and the type of the species introduced to a number of places of the inland of South Korea, investigations on principal characters of needle, cone and seed were made with a hope to obtain informations on the evaluation of the species for possible use in the reforestation program in Korea in the future. Pinus parviflora is belonged to the Sub-genus Haploxylon of Genus Pinus and it has been speculated among dendrologists that this speoies is not monotypic. 308 rendomly selected trees from 8 different elevations of a natural stand of P. parviflora in the Dagelet Island, and 168 trees of P. parviflora growing at 15 different locations of the inland of South Korea were employed as samples along with 300 trees of P. koraiensis as control. The results obtained are summarized as follows: 1. The needle length of the Pinus parviflora of the Dagelet Island is longer than that of the species growing in the inland by 21-35 percent with statistical significancy. (Table 2) 2. In the cross section of needle, no resin canal was observed in about 50-70 percent of the sample trees of the Dagelet Island, whereas the resin canals appearing at external in most cases were observed in all sample trees from the inland. Consequently, the number of resin canals per needle was 0.4-0.9 with the Dagelet Island type and 2.0-2.7 with the inland type and these differences were statistically significant. (Table 3, Fig.2) 3. The Pinus parvviflora type of the Dagelet Island bas yellowish brown cones, and the Pinus parviflora type of Suwon and Kwangyang has redish brown cones. In both the length of cone and the number of cone scale, the difference between the type of the Dagelet Island and the type of the inland was also statistically significant. The cone scales of the Dagelet Island type are slightly opened, whereas the cone scales are widely opened with both of Suwon and Kwangyang type. (Table 4, Fig. 3) 4. the seed color, of the Dagelet Island type is yellowish brown, while it is greyish brown with Kwangyang and Suwon type. In the length and width of seed, the Dagelet Island type showed significantly larger values than that of the inland type. The length of seed was longest with the Kwangyang type being followed by Suwon and the Dagelet Island type in ordar. The seed wing of the Kwangyang type are longer than the seed, while that of the Dagelet Island type is degenerated to be shorter than the seed. (Table 5, Fig. 4) 5. The Pinus parviflora type of the Dagelat Island is similar in many respects to the southern type of Pinus parviflora of Japan except that many has no resin canals in the needle. 6. On the basis of the results obtained in this study, it may be concluded that the type of Pinus parviflora of the Dagelet Island is significantly different from the type of the species introduced to the inland and that there is no recognizable variation between the population of the different altitude of the Dagelet Island and the individual variation within population is also negligible. In the light of the high value of the tree not only as an ornamental tree but as an economical tree, The type of Pinus parviflora of the Dagelet Island is considered to be recommendable to be used for the future reforestation program of Korea.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.79-85
• /
• 2005

The purpose of this study was to evaluate the obturation efficiency of a non-standardized gutta-percha cone in curved root canals prepared with 0.06 taper nickel-titanium instruments. Sixty simulated curved root canals in clear resin blocks were prepared with crown-down technique using 0.06 taper rotary $ProTaper^{TM}$and ProFile (Dentsply-Maillefer) until apical canal was size 30. Root canals were randomly divided into 4 groups of 15 blocks and obturated with cold-laterally compacted gutta-percha technique by using either a non-standardized size medium gutta-percha cone or an ISO-standardized size 30 one as a master cone. Gutta-percha area ratio were calculated at apical levels of 1, 3 and 5 mm using AutoCAD 2000 after cross-sectioning, and the data were analyzed with one-way and two-way ANOVAs and Duncan's multiple range test. Non-standardized size medium cone groups showed significantly higher gutta-percha area ratio than standardized cone groups at all apical levels (p < 0.01). Non-standardized cone groups used significantly less accessory cones than standardized cone groups (p < 0.01).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.305-312
• /
• 2008

Crown-root fractures occur throughout both crown and root, and are defined as fractures involving enamel, dentin and cementum. The fractures may be grouped according to pulpal involvement into complicated and uncomplicated one. Crown-root fractures often occur on maxillary anterior teeth and comprise 5% of injuries affecting the permanent dentition and 2% in the primary dentition. To restore crown-root fractured tooth, biologic width must be maintained. For maintaining biologic width, such methods as gingivectomy following osteoplasty or orthodontic extrusion or surgical extrusion are available. Surgical extrusion is a method that extracts the tooth and replants the fractured tooth supragingivally. It is indicated when the length of the crown fragment is less than half the length of the clinical root. In these cases, root canal treatment and crown restoration using light-cured composite resin were performed after surgical extrusion. In following periodic examinations, favorable outcome was observed.

• Restorative Dentistry and Endodontics
• /
• v.25 no.4
• /
• pp.543-549
• /
• 2000

Gutta-percha와 근관sealer를 사용한 근관 충전은 가장 많이 이용되고 성공률이 높은 방법이지만, 현재 사용되는 모든 근관sealer는 미세누출을 나타낸다. 따라서 더 효과적인 근관 폐쇄를 이루기 위한 재료 및 방법들이 연구되어왔다. 이중 상아질 접착제는 근관 충전재와 함께 사용되어 미세누출을 감소시키지만, 근관 내에 사용하기에 술식이 복잡하고 기술이 요구된다. 본 연구의 목적은 gutta-percha와 레진계 근관 sealer로 충전한 근관에서 self-etching primer를 미리 도포한 경우와 도포하지 않은 경우의 치근단 미세누출을 비교하고, self-etching primer를 도포함에 있어 근관 내에 적용하는 방법에 따른 미세누출을 비교하는 것이다. 또한 근관sealer와 상아질 계면을 주사전자현미경으로 관찰하여, 이 결과를 미세누출과 관련시켜보고자 하였다. 36개의 발거된 사람의 단근치에서 치관부를 절단, 제거하고 ProFile로 근관 형성한 후, 무작위로 선택하여 4개의 군으로 분류하였다. 1군에서는 주사기와 30게이지 주사 바늘로 self-etching primer를 근관 내에 적용하였고, 2군에서는 self-etching primer를 paper point에 적셔 근관 내에 적용하였다. 3군에서는 self-etching primer를 적용하지 않았다. 1, 2, 3군의 치아를 gutta-percha와 AH26 sealer를 사용하여 continuous wave 충전법으로 충전한 후 치근단공 주위 3mm를 제외한 치근변에 nail polish를 2회 도포하였고, 4군(음성 대조군)은 치근면 전체에 도포하였다. 1군과 2군에서 각각 2개의 치아는 주사전자현미경적 관찰을 위해 준비하였다. 모든 치아를 Methylene Blue 수용액에 48시간동안 침적, 수세한 후 치아 장축에 평행하게 양분하여 10배의 실물확대현미경 하에서 치근단 색소 침투를 관찰하였다. Self-etching primer를 도포한 군과 도포하지 않은 군 사이에는 평균 미세누출량에 유의한 차이가 없었다. 주사 바늘로 적용한 군과 paper point로 적용한 군 사이에도 평균 미세누출량에 유의한 차이가 없었다. 상아질과 근관 sealer계면의 주사전자현미경 관찰 결과 일부분에서 긴밀한 접착 관계를 나타내었고, 다른 부분에서는 간극을 나타내었다.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.3
• /
• pp.200-206
• /
• 2014

PURPOSE. This in vitro study investigated the fracture resistance of endodontically treated premolars restored using silorane-or methacrylate-based composite along with or without fiber or nano-ionomer base. MATERIALS AND METHODS. Ninety-six intact maxillary premolars were randomly divided into eight groups (n = 12). G1 (negative control) was the intact teeth. In Groups 2-8, root canal treatment with mesio-occlusodistal preparation was performed. G2 (positive control) was kept unrestored. The other groups were restored using composite resin as follows: G3, methacrylate-based composite (Z250); G4, methacrylate composite (Z250) with polyethylene fiber; G5 and G6, silorane-based composite (Filtek P90) without and with the fiber, respectively; G7 and G8, methacrylate-and silorane-based composite with nano-ionomer base, respectively. After aging period and thermocycling for 1000 cycles, fracture strength was tested and fracture patterns were inspected. The results were analyzed using ANOVA and Tukey HSD tests (${\alpha}$=0.05). RESULTS. Mean fracture resistance for the eight groups (in Newton) were G1: $1200{\pm}169^a$, G2: $360{\pm}93^b$, G3: $632{\pm}196^c$, G4: $692{\pm}195^c$, G5: $917{\pm}159^d$, G6: $1013{\pm}125^{ad}$, G7: $959{\pm}148^d$, G8: $947{\pm}105^d$ (different superscript letters revealed significant difference among groups). Most of the fractures in all the groups were restorable, except Group 3. CONCLUSION. Silorane-based composite revealed significantly higher strength of the restored premolars compared to that of methacrylate one. Fiber insertion demonstrated no additional effect on the strength of both composite restorations; however, it increased the prevalence of restorable fracture of methacrylate-based composite restored teeth. Using nano-ionomer base under methacrylate-based composite had a positive effect on fracture resistance and pattern. Only fiber-reinforced silorane composite restoration resulted in a strength similar to that of the intact teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.576-580
• /
• 2003

A 7-year-old male was refered to Department of Pediatric Dentistry, Wonkwang Dental Hospital for treatment of a traumatic injury to the teeth of the maxillary anterior region of the mouth. His right central incisor presented subluxation and root fracture, the left central incisor had suffered intrusive luxation and root fracture. The initial treatment involved reposition and fixation of the teeth with 0.5mm stainless steel wire and composite resin. The patient was submitted for clinical and radiographic fallow-up. After 4 years, radiographically the right central incisor seemed to be healed by hard tissue union and showed to be indistinct fracture line, intact lamina dura. The left central incisor radiographically was healed by interposition of bone and connective tissue and showed to be distinct horizontal fracture line separating the fragments, and pulp canal obliteration. In clinical examination, the teeth showed a normal response to elective pulp test, percussion and mobility test. Pulp survival after injuries appears to be dependent upon the type of luxation injury, age of patient, stage of root development and degree of dislocation. In this case, the two teeth with incomplete root formation were suffered different type of injury by trauma and has showed different healing aspect.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.149-157
• /
• 2016

Tooth preparation design is essential for successful laminate veneer treatment. Preservative tooth preparation limited on enamel, supra-margin advantageous for plaque control, and maintaining contact points known as a standard concept. However, the tooth preparation design has been the controversial issue. In biomechanical considerations, the incisal coverage should be decided on esthetic needs and necessity for the anterior guidance reconstruction. In occasion for sufficient enamel thickness, preparation can prolong to the palatal side but not recommended at palatal concavity. Elongation to contact point is selective option according to the cases. If an old resin restoration located at contact area, laminate veneer should cover over half area of that after surface treatment. The laminate veneer can be also selected at a partially discolored tooth root canal therapy (RCT) and at this occasion, the fiber-reinforced composite (FRC) posts are recommended.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.8-20
• /
• 1976

For study on the variation of natural stand, three populations of Pinus densiflora S. et Z. were selected at samsanri Yongogmyun Myongjugun Kangwondo (4), Hawonri seomyun Uljingun Kyongbuk (5), and Emogdong Suweon Kyongkido (6) successibely after the selection of three population in 1974. Twenty individual trees were chosen from each population and the morphological characteristics of trees, needle and wood properties were investigated on the trees. The results are summerized as follows; 1. Serration density, resin canal number in needle did not show significant differences, however stomata row number in the both sides of needle showed highly significant differences among 3 populations. But significant differences were calculated among individual trees in a population regarding any character of needles. 2. Ail population had high correlation on the stomata row between abaxial and adaxial side of needle. 3. The Myongjungun population showed the highest value of resin duct index, which means the population had the highest degree of hybrid character. 4. The ring segment width and summerwood percentage in the wood properties had significant differences, and yet specific gravity and tracheid length had not significant differences statistically among 3 populations. But all the values were significant statistically among the ring segments within population. 5. The ring segment width decreased rapidly with increasing tree age but summerwood percentage, specific gravity, tracheid length increased slowly to the middle age of tree and then decreased slowly after the age. But the patterns of decrease or increase were some different by population. 6. The values of Uljingun population were generally high in the coefficient of variation on all the needle characters. And the values of Suweon population were always the highest and those of Myongjugun population the lowest in the coefficient of variation on all the wood properties.