• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.297-302
• /
• 2010

This study is focused on the resin layer formation of UV imprinting process by changing imprinting pressure and period. The mold shape is made for the process of window open over the pattern transfer area and the imprinting period is assigned as the time just before the UV light curing. The residual layer is measured by changing the imprinting period and pressure magnitude, and the measured data of residual layer provides useful information for the design of the process conditions of imprinting processes.

• Journal of Nutrition and Health
• /
• 제15권1호
• /
• pp.22-29
• /
• 1982

As sugar and amino acid were added to the ascorbic acid solution the content of ascorbic acid was quantitatively determined by 2, 4-dinitrophenyl hydrazine method. The residual ascorbic acid was shown to increase slightly when sorbose, rhamnose or mannose was added to the ascorbic acid solution whereas residual ascorbic acid was shown to decrease in time to the addition of other sugars. The effects of amino acid to the ascorbic acid solution were found that monoamino-mono, or dicarboxylic acids and aromatic amino acids increased the residual ascorbic acidity whereas diamino-monocarboxylic acids and sulfur containing amino acids decreased the residual ascorbic acidity.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.883-888
• /
• 1999

To obtain high positioning auccuracy for a long, flex bleman Ipulator, residual vibration must be removed from the tip motion. But it is difficult to control the vibration of low frequency. There are open-loop and closed loop methods in the elimination of the residual vibration. We inroduce input shaping technique has been used as a simple open-loop method of controlling the residual vibration of a flexible manipulator. Design of input shaper in the continuous time domain is complicated. This paper presents a new technique that designs input shaper in the z-domain and analyzes input shaping method in the z-domain. This technique is simple and easy to design input shaper.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.35-39
• /
• 2003

Laser welding has good characteristics such as high density energy, high speed and short heating time, as compared with conventional arc welding. The joint of laser welding also has good mechanical characteristics in general. However, relevant research is not sufficient to understand laser welding in the view point of mechanics until a recent date. In this paper, numerical simulation has been conducted to analyze distribution of welding residual stresses. Welding residual stresses of specimen have been measured by using sectioning method to compare the results between simulation and experiment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.593-595
• /
• 1995

X-Ray Diffraction method that gives direct information about the deformation of crystal lattice is used for the determination of profiles of the residual stress along the depth of heavily boron doped silicon. The residual stress distribution is obtained by XRD method as measuring the deformation of the front surface of the $p^+$ silicon layer fabricated through different etch time. It is determined that the compressive residual stress exists in the most region except the font surface.

• Journal of Mechanical Science and Technology
• /
• 제18권1호
• /
• pp.12-19
• /
• 2004

Using LSM (laser scanning method) , the radius of curvature due to thermal deformation in polyimide film coated on Si substrate is measured. Since the polyimide film shows viscoelastic behavior, i.e., the modulus and deformation of the film vary with time and temperature, we estimate the relaxation modulus and the residual stresses of the polyimide film by measuring the radius of curvature and subsequently by performing viscoelastic analysis. The residual stresses relax by an amount of 10％ at 100$^{\circ}C$ and 20% at 150$^{\circ}C$ for two hours.

• Communications for Statistical Applications and Methods
• /
• 제20권1호
• /
• pp.85-96
• /
• 2013

A new bootstrap method combined with the stationary bootstrap of Politis and Romano (1994) and the classical residual-based bootstrap is applied to stationary autoregressive (AR) time series models. A stationary bootstrap procedure is implemented for the ordinary least squares estimator (OLSE), along with classical bootstrap residuals for estimated errors, and its large sample validity is proved. A finite sample study numerically compares the proposed bootstrap estimator with the estimator based on the classical residual-based bootstrapping. The study shows that the proposed bootstrapping is more effective in estimating the AR coefficients than the residual-based bootstrapping.

• 한국압력기기공학회 논문집
• /
• 제7권1호
• /
• pp.41-47
• /
• 2011

Residual stress is the key parameter for reliability and lifetime assessment because it can reduce the fatigue strength and fracture properties of industrial structures. Recently, instrumented indentation testing (IIT) has been widely used for evaluating it, since it does not need specific specimen and time-consuming procedure. However, conventional Oliver-Pharr method, which is used for calibrating contact depth to analyze indentation load-depth curve, cannot estimate plastic pile-up between indenter and surface of specimen. Here, we introduce f parameter which is the ratio of contact depth and maximum depth, to consider pile-up height. And, its application for evaluating residual stress of weldment is introduced.

• ETRI Journal
• /
• 제29권5호
• /
• pp.596-606
• /
• 2007

It is well known that an OFDM receiver is vulnerable to synchronization errors. Despite fine estimations used in the initial acquisition, there are still residual synchronization errors. Though these errors are very small, they severely degrade the bit error rate (BER) performance. In this paper, we propose a residual error elimination scheme for the digital OFDM baseband receiver aiming to improve the overall BER performance. Three improvements on existing schemes are made: a pilot-aided recursive algorithm for joint estimation of the residual carrier frequency and sampling time offsets; a delay-based timing error correction technique, which smoothly adjusts the incoming data stream without resampling disturbance; and a decision-directed channel gain update algorithm based on recursive least-squares criterion, which offers faster convergence and smaller error than the least-mean-squares algorithms. Simulation results show that the proposed scheme works well in the multipath channel, and its performance is close to that of an OFDM system with perfect synchronization parameters.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제27권2호
• /
• pp.265-270
• /
• 2013

Dialysis is the rate-limiting step in the preparation of aqueous silk fibroin (SF) solution. However, the traditional practice of dialyzing SF solution for at least 48 h to remove LiBr is not based on empirical evidence. The aim of the present study was to systematically measure LiBr content in SF solutions dialyzed for varying lengths of time and assess the potential toxicity of residual lithium ions in cells. Complete removal of lithium ions was not achieved even after 72 h of dialysis, with a residual lithium ion content in the solution of 22.85 mg/l. SF films prepared from solutions dialyzed for 8 and 24 h had predominantly random coil or b-sheet structures, respectively. The residual lithium had little cytotoxicity in NIH3T3 fibroblast cells, but viability was compromised in cells grown on SF film prepared from solution dialyzed for 24 h.