• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1555-1559
• /
• 2008

$5{\sim}150{\mu}m$의 오스테나이트계 304(Fe-18%Cr-12%Ni) 및 316L(Fe-18%Cr-13%Ni-2.4%Mo)미립 분말을 사용하여 소결 특성을 평가한 결과, 다음과 같은 결론을 얻었다 (1) 3.6ks의 소결 시간으로는 어느 경우에 있어서나 소결조건에 관계없이 소결체의 상대밀도는 $95{\sim}98%$에서 포화하여 완전 치밀화된 소결체를 얻을 수 없었다. (2) $5{\mu}m$분말을 진공소결 하였을 경우, ts=57.6ks에서 거의 완전 치밀화된 소결체가 얻어졌다. (3) 소결 분위기에 상관없이 304 및 316L소결체에는 $0.5{\sim}0.6%$정도의 산소가 잔류하였다. (4) 진공 소결의 경우, 탄소분 첨가에 의해 소결체의 잔류 산소량은 무첨가 소결체에 비하여 0.375이상 감소하였고, 조직적으로도 산화물은 거의 관찰되지 않았다. 또한 탄소 첨가는 소결체의 밀도 향상 효과로 작용하여 목적하는 완전 치밀화된 고성능 소결체를 제조하는 것이 가능하게 되었다.

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.656-669
• /
• 1998

Hydrogen peroxide at high concentration during walking bleaching may cause damage to the tooth structure and to the surrounding periodontal tissues and may develop external root resorption. Clinically, It is so important to find a method of prevention or minimization of these complications. The efficacy of various chamber-irrigating agents to eliminate residual hydrogen peroxide after walking bleaching was examined and compared with water rinse in this study. Extracted human 46 premolars without any cementoenamel junction defects were treated endodontically and based with IRM to 1 mm below CEJ and totally bleached 3 times for each tooth with 30% hydrogen peroxide and sodium perborate. Upon completion of the 3rd walking bleaching procedure, the cervical portion and pulp chamber of each group of teeth were irrigated with catalase, 70% ethylalcohol, acetone, and distilled water. And then, a radicular hydrogen peroxide penetration was measured with spectrophotometer immediately after each bleaching and following treatment with each chamber-irrigating agents, and the significance of their eliminating efficacy of residual hydrogen peroxide was analyzed by Kruskal-Wallis test. The results were obtained as follows. 1. Cervical root penetration of hydrogen peroxide was increased as the bleaching procedure was repeated(P<.01). 2. The most effective irrigant that removed residual hydrogen peroxide was the catalase, and the least effective one was water rinsing (P<.01).; there was no significant difference between the acetone and ethanol group. 3. The Irrigation with antioxidant enzyme or water-displacement solutions can eliminate residual oxygen radicals from the pulp chamber effectively after walking bleaching. So, these agents can reduce adverse effects such as cervical external resorption and periapical inflammation and prevent residual $O_2$ from impeding composite resin polymerization, thus increase the bonding strength of composite resin. This, in turn reduces microleakage and discoloration of the esthetic restoration, extending its service-life.

• 한국포장학회지
• /
• 제25권3호
• /
• pp.95-99
• /
• 2019

질소 치환한 소용량 조제분유 포장에서 초기 잔존 산소와 저장 중 투과 유입되는 산소를 제거하여 추가적인 산화 방지 효과를 얻고자 산소흡수제를 함입하는 포장을 구성 설계하였다. 조제분유 13 g을 담은 5 × 7 cm의 폴리에틸렌/펄프 다층 세공성 여과 봉지와 함께 산소흡수제를 8 × 9 cm의 알루미늄 적층 필름 포장에 넣은 후, 질소 기체로 치환포장하여 30℃에서 254일 동안 저장하였고, 같은 조건에서 산소흡수제가 함입되지 않은 대조구 포장 조건과 비교하였다. 산소흡수제는 조제분유와 직접적인 접촉을 하지 않으면서도 포장 내부의 산소를 전량 흡수할 수 있었으며 산소의 제거에 따른 산화 방지로 인하여 이산화탄소 발생을 보이지 않았다. 전 저장기간 동안 대조구 포장 제품에 비하여 산소흡수제 함입 포장의 제품에서는 0.7~2.2 meq/kg 만큼의 낮은 과산화물가를 보여서 조제분유 포장에서 산소흡수제의 산화 지연 효과를 확인할 수 있었다. 초기 갈변지표 물질인 HMF 함량은 두 처리구간 큰 차이를 보이지 않았다. 본 연구의 산소흡수제 함입 조제분유 포장은 소용량 포장의 유통기한을 연장하고 제품 품질을 향상시킬 수 있는 가능성을 제공하였다.

• 한국전기전자재료학회논문지
• /
• 제25권7호
• /
• pp.543-551
• /
• 2012

In this study, transparent conducting Al-doped Zinc Oxide (AZO) films with a thickness of 150 nm were prepared on corning glass substrate by the RF magnetron sputtering with using a Al-doped zinc oxide (AZO), ($Al_2O_3$: 2 wt%) target at room temperature. This study investigated the effect of rapid thermal annealing temperature and oxygen ambient on structural, electrical and optical properties of Al-doped zinc oxide (AZO) thin films. The films were annealed at temperatures ranging from 400 to $700^{\circ}C$ by using Rapid thermal equipment in oxygen ambient. The effect of RTA treatment on the structural properties were studied by x-ray diffraction and atomic force microscopy. It is observed that the Al-doped zinc oxide (AZO) thin film annealed at $500^{\circ}C$ at 5 minute oxygen ambient gas reveals the strongest XRD emission intensity and narrowest full width at half maximum among the temperature studied. The enhanced UV emission from the film annealed at $500^{\circ}C$ at 5 minute oxygen ambient gas is attributed to the improved crystalline quality of Al-doped zinc oxide (AZO) thin film due to the effective relaxation of residual compressive stress and achieving maximum grain size.

• 한국자기학회지
• /
• 제9권2호
• /
• pp.78-84
• /
• 1999

고온연소합성법(self-propagating high temperature synthesis)을 이용하여(Ni, Zn)Fe2O4 분말을 제조하고 초기 분말의 크기와 산소압에 따른 생성물의 미세조직과 자기적 특성을 조사하였다. (Ni, Zn) 페라이트 분체는 다양한 입도의 Fe, Fe2O3, NiO, ZnO의 원료 분말을 n-hexane 용액에서 습식으로 spex mill을 사용하여 5분 혼합하고 12$0^{\circ}C$ 진공로에서 24시간 건조한 후 0.5~10기압의 산소압에서 고온연소합성 반응으로 제조하였다. 성형 압력이 없는 경우 평균 연소온도와 연소속도는 최대 약 125$0^{\circ}C$와 9.8mm/sec였으며 산소압과 ZnO입도가 감소하면 감소하였다. 고온연소합성된 시료는 다공질 구조를 갖고 있으며 X-선 회절 시험으로 시편들의 spinel구조를 관찰하였다. ZnO입도와 산소압이 증가하면 보자력, 최대자화, 잔류자화, 각형비 및 큐리 온도는 각각 13.24Oe, 43.88emu/g, 1.27emu/g, 0.0034emu/gOe, 37.8$^{\circ}C$에서 11.83Oe, 68.87emu/g, 1.23emu/g, 0.00280emu/gOe, 439.$^{\circ}C$와 7.99Oe, 75.84emu/g, 0.791emu/g, 0.001937emu/gOe, 53.8$^{\circ}C$로 변화하였다. 산소압에 따른 겉보기 활성화에너지를 고려하면 페라이트의 연소합성 반응은 ZnO입도와 산소압에 크게 의존한다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.536-540
• /
• 2011

This study reports the origin of the electrochemical improvement of $LiFePO_4$ when synthesized by wet milling using acetone without conventional carbon coating. The wet milled $LiFePO_4$ delivers 149 $mAhg^{-1}$ at 0.1 C, which is comparable to carbon coated $LiFePO_4$ and approximately 74% higher than that of dry milled $LiFePO_4$, suggesting that the wet milling process can increase the capacity in addition to conventional carbon coating methods. UV spectroscopy, elemental microanalysis, and evolved gas analysis are used to find the root cause of the capacity improvement during the mechanochemical reaction in acetone. The analytical results show that the improvement is attributed to the conductive residual carbon on the surface of the wet milled $LiFePO_4$ particles, which is produced by the reaction of $FeC_2O_4{\cdot}2H_2O$ with acetone during wet milling through oxygen deficiency in the precursor.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.863-868
• /
• 2001

The present study was carried out to investigate the effect of MA processing variables on the microstructural properties of composite powders and the coefficient of thermal expansion of pulse electric current sintered AlN-Cu powder compacts. The AlN-Cu powders had a size of less than 15 $\mu\textrm{m}$ with 25 nm size of copper crystallite after MA 32 hours. The finely distributed AlN-Cu powder compacts were completely achieved after PECS. The residual oxygen was considerably removed after hydrogen reduction treatment. The residual carbon was completely removed to 97%. The CTE of AlN-Cu powder compacts showed a good consistency with Kingery-Tuner model when the volume fraction of copper was less than 60%. When it was more than 60%, the CTE had a good agreement with Series model.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.491-497
• /
• 2009

The purpose of this study is to propose a method of controlling redtide microbes which grow abundantly and form harmful algal bloom in eutrophic waterbody with yellow loess and hydrogen peroxide. In the laboratory test, hydrogen peroxide was applied to single species of C. polykrikoides and multispecies of redtide microbes. The seawater was evaluated by the pre-test analysis including chlorophyll-a, luminance and transmittance. The test results showed that both single and mixed species of redtide microbes could be controlled with the dose of 30mg $H_2O_2/L$. Residual hydrogen peroxide was completely decomposed with the addition of powdered yellow loess at 2g/L~10g/L. However, the decomposition rate of residual hydrogen peroxide for sintered granular yellow loess was relatively low compared to the use of powdered one. With the addition of dissolved oxygen concentration was increased at a rate of 0.013 mg DO/mg $H_2O_2$, which is a little lower than the one predicted theoretically. No evidence for any detrimental effects on Artemia, a type of brine shrimps, was shown up to the concentration of 100mg $H_2O_2/L$.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.802-808
• /
• 1996

PbTiO3 thin films were fabricated onto MgO(100) single crystal substrate by reactive D. C magnetron sput-tering of Pb and Ti metal in an oxygen and argon gas mixture. The annealing of the thin films resulted in the decrease of both the c-axis orientation ratio and the lattice parameter. It is well known that the c-axis lattice parameter of thin film is dependent on the Pb/(Pb+Ti)ratio and the residual stress in the film The PbTiO3 thin films with a Pb/(Pb+T) ratio ranging from 0.45 to 0.57 were fabricated and annealed. The structure of the film the c-axis orientation ratio and the lattice parameter were not dependent on the Pb/(Pb+Ti) ratio before and after annealing. These experimental results proved that the decrease of the c-axis lattice parameter under the annealing conditions was due to the relaxation of the intrinsic stress in the film. This relaxation of the intrinsic stress caused the decrease of the c-axis orientation ratio and this phenomenon can be explained by c-axis growth lattice model.

• 한국재료학회지
• /
• 제4권8호
• /
• pp.934-944
• /
• 1994

수산화물법에 의해 제작된 $\alpha$-stannic acid의 열분해 거동과 $SnO_{2}$분말의 성질에 미치는 잔류염소이온의 영향을 관찰하였다. $SnCl_{4}$와 $NH_{4}$OH 수용액을 중화시켜 $\alpha$-stannic acid침전물을 제작하고 $NH_{4}NO_{3}$수용액으로 세척하였다. 분말내의 잔류 염소이온의 양을 주절하기 위하여 세척정도를 3단계로 조정하였다. 세척후 $100^{\circ}C$에서 건조하고, $500^{\circ}C$ ~ $1100^{\circ}C$에서 하소함으로써 $SnO_{2}$분말을 제조하였다. $\alpha$-stannic acid의열분해 거동ㅇ르 DT-TGA 와 FTIR을 통하여 관찰하고, $SnO_{2}$분말의 조성과 입자크기 및 비표면적을 각각 AES, TEM 및 BET을 통하여 측정하였다. 잔류 염소이온 양이 감소되면, 저온 하소시 일차입자의 상대적 크기가 커지는 반면 고온하소시에는 상대적으로 감소되었ㄷ. 잔류 염소이온의 일부는 $\alpha$-stannic acid내의 격자산소 자리에 위치함으로써, 저온가열시 결정수탈리와 결정화를 지연시키고 또한 고온가열시에는 이의 증발에 의해 산소공공이 생성되어 소결을 촉진시킨다고 제의하였다.