• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1493-1500
• /
• 2001

Recently small punch creep testing (or miniature disc bend creep test) has received much attention through European collaborative research projects. This method was considered as a substitute for the conventional creep rupture testing by which the residual creep life is measured from the specimen taken out from serviced components of high temperature plants. It would be beneficial if the material creep properties such as power law creep constants as well as the creep rupture life can be measured from the small punch creep test. In this paper a method of assessing creep constants from the small punch creep testing is proposed. Finite element analyses were performed to investigate evolution of stress and strain rate at the weakest locations of the small punch creep specimen. Elastic-plastic-secondary creep analyses were carried out. The estimation equations for creep constants by the small punch creep testing are proposed based on the finite analysis results. Small punch creep tests were also performed with 9Cr steel and the accuracy of the proposed equation was verified by the experimental results.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.3
• /
• pp.153-157
• /
• 2022

BACKGROUND: The residue dissipation pattern of pesticides for agricultural products during the pre-harvest period after the final application is important to prevent the maximum residue limit (MRL) violations in domestic and export markets. The MRL violations of carbendazim are observed more often in chamnamul by pesticide residue management surveys by the Ministry of Food and Drug Safety. The residue level at the pre-harvest interval (PHI) and the residue dissipation constant from the critical good agricultural practice (cGAP) trials could be estimated to meet the MRL and pose a health risk to consumers. METHODS AND RESULTS: Chamnamuls were harvested at 0, 1, 3, 5, 7, 10, and 14 days after application of carbendazim in accordance with critical GAP. The residue analysis in chamnanul was performed by HPLC-DAD with the C₁₈ column. The limit of quantitation of carbendazim was 0.04 mg/kg, and the recoveries were 74.4 - 95.8% at the two spiked levels (LOQ and 10LOQ) of carbendazim. The dissipation rates in chamnamul were calculated from the residues at the sampling days by statistical method at a 95% confidence level. The biological half-lives of residual carbendazim in the field trials 1 and 2 were 4.9 and 4.4 days, respectively. CONCLUSION(S): In this dissipation study, the residue concentrations at the recommended PHI were higher than the established MRL in Korea. Therefore, the MRL is proposed based on the residue data sets from the trials conducted at the same cGAP and the dietary exposure assessment.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.2
• /
• pp.142-147
• /
• 2013

BACKGROUND: This study was conducted to monitor residual pesticides in domestic agricultural products and to assess their risk to human health. METHODS AND RESULTS: 123 samples containing both general and environment-friendly certified agricultural products were purchased from traditional domestic markets and supermarkets in six provinces of Korea. Multiresidue analyses of one hundred twenty-two pesticides except for herbicides were performed with gas chromatography-electron capture detector, gas chromatography-nitrogen/phosphorus detector, and high-performance liquid chromatography. Sixteen pesticides were detected in 45 agricultural product samples, which were 38 general, 6 low pesticide and 1 of GAP agricultural product samples and the detection rate was 33.6%. Pesticides detected in agricultural product samples were cypermethrin, lufenuron, fenvalerate, bifenthrin, chlorfenapyr and iprodione. Residual concentration of 18 samples were exceeded the recommended maximum residue limit set by Ministry of Food and Drug Safety and two kinds of unregistered pesticides in korea were also detected in two samples. CONCLUSION(S): In order to do risk assessment by agricultural products consumption, estimated daily intake of residual pesticides were determined and compared to acceptable daily intake, referring to %ADI values. The range of %ADI values was from 0.038% to 2.748%. Taken together, it demonstrates the pesticides found in agricultural products samples were below the safety margin, indicating no effect on human health.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.2
• /
• pp.65-75
• /
• 2023

Ships operated at sea for a long time are subjected to various kinds of loads, which may cause various types of damage. Such damages will eventually reduce the strength of hull structures. Therefore, it is necessary to estimate and evaluate the residual strength and remaining fatigue life of aging ships in order to secure structural safety, establish a reasonable maintenance plan, and make a judgment of life extension. For this purpose, the corrosion damage and local denting damage should be measured, fatigue damage estimation should be performed, and material properties of aged steel should be identified. For this study, in order to investigate the mechanical properties of aged steel, steel plates were obtained from a naval ship that reached the end of her life span. The specimens were manufactured from the obtained steel plates, and static and dynamic tensile tests, fatigue tests, and metallographic tests were performed. The mechanical properties obtained from the aged steel plates were compared with those of new steel plates to quantify the aging effect on the mechanical properties of marine steel materials.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.308-314
• /
• 2012

In order to monitor the residual pesticides in environment friendly agricultural commodities, fruits and fruiting vegetables. Twenty-five agricultural commodities were collected twice in May and August 2011 from nine environment friendly agricultural commodities-selling supermarkets and retail stores located in eight major cities in Korea. The number of each agricultural commodity collected, 555 samples in total, was 152 organic agricultural products, 202 pesticide-free agricultural products and 201 low-pesticide agricultural products. Pesticide residues in samples were analyzed by multiresidue method for 245 pesticides using a GC-ECD/NPD and an HPLC-DAD/FLD and the peaks suspected as pesticides were identified with a GC/MSD. As a result of pesticide residue analysis, three pesticides, bifenthrin, EPN and chlorpyrifos, were detected from four samples including apple, representing a detection rate of 0.72%. The residue levels of the four pesticide-detected samples were less than their maximum residue limits (MRLs) but one pesticide EPN detected from pear exceeded its legible criterion of one twentieth MRL. Estimated daily intakes of the pesticides detected from fruits and fruiting vegetables were less than 0.76% of their maximum permissible intake.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.499-511
• /
• 2019

The reliability of reinforced concrete structures is frequently compromised by the deterioration caused by reinforcement corrosion. Evaluating the effect caused by reinforcement corrosion on structural behaviour of corrosion damaged concrete structures is essential for effective and reliable infrastructure management. In lifecycle management of corrosion affected reinforced concrete structures, it is difficult to correctly assess the lifecycle performance due to the uncertainties associated with structural resistance deterioration. This paper presents a stochastic deterioration modelling approach to evaluate the performance deterioration of corroded concrete structures during their service life. The flexural strength deterioration is analytically predicted on the basis of bond strength evolution caused by reinforcement corrosion, which is examined by the experimental and field data available. An assessment criterion is defined to evaluate the flexural strength deterioration for the time-dependent reliability analysis. The results from the worked examples show that the proposed approach is capable of evaluating the structural reliability of corrosion damaged concrete structures.

• Journal of Welding and Joining
• /
• v.29 no.3
• /
• pp.76-81
• /
• 2011

Recently, the structural failures due to fatigue occur frequently with the increase of size of ships and offshore structures. In this respect, the assessment of fatigue life and the residual strength are very important. Currently, the smart materials technology has demonstrated a variety of possibilities for a diagnosis of structural strength and structural health condition for large structures. The benefits and feature of the MFC sensor are more flexible, durable and reliable than conventional smart material. In this study, Micro Fiber Composite (MFC) sensor for the measurement of stress intensity factor (SIF) of two dimensional cracks induced in a structure is developed. Two MFC sensors are placed in the vicinity of the crack tip close to each other with the crack tip in between them. The SIFs of Mode I($K_I$) as well as of Mode II($K_{II}$) based on the piezoelectric constitutive law and fracture mechanics are calculated. In this study, the SIF values measured by MFC sensors are compared with the theoretical results and measured value.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.316-321
• /
• 2000

The role of fatigue on the surface damage of 5% chrome cold milling work roll is evaluated. Uniaxial and torsional fatigue tests are carried out, and the baseline data for fatigue life evaluation are established. An appropriate multiaxial fatigue parameter is developed from the fatigue data. Fatigue tests are also performed under compressive mean stresses, and a mean stress model is formulated. A computer program is developed to assess the interaction of fatigue and grinding of the roll. The fatigue damage is computed for selected servicing conditions. It is found that the fatigue damage can be an important issue when the effect of mean stress is ignored, however the fatigue damage is negligibly small when the effect of mean stress including the residual stresses currently used is fully accounted. The result indicates that spalling due to the growth of thermal shock cracks is more important than fatigue damage in roll surface failure.

• International Journal of Reliability and Applications
• /
• v.3 no.1
• /
• pp.1-16
• /
• 2002

In reliability engineering, the bathtub-shaped hazard rates play an important role in survival analysis and many other applications as well. For the bathtub-shaped, initially the hazard rate decreases from a relatively high value due to manufacturing defects or infant mortality to a relatively stable middle useful life value and then slowly increases with the onset of old age or wear out. In this paper, we present a new two-parameter lifetime distribution function, called the Loglog distribution, with Vtub-shaped hazard rate function. We illustrate the usefulness of the new Vtub-shaped hazard rate function by evaluating the reliability of several helicopter parts based on the data obtained in the maintenance malfunction information reporting system database collected from October 1995 to September 1999. We develop the S-Plus add-in software tool, called Reliability and Safety Assessment (RSA), to calculate reliability measures include mean time to failure, mean residual function, and confidence Intervals of the two helicopter critical parts. We use the mean squared error to compare relative goodness of fit test of the distribution models include normal, lognormal, and Weibull within the two data sets. This research indicates that the result of the new Vtub-shaped hazard rate function is worth the extra function-complexity for a better relative fit. More application in broader validation of this conclusion is needed using other data sets for reliability modeling in a general industrial setting.

• Structural Engineering and Mechanics
• /
• v.72 no.1
• /
• pp.31-41
• /
• 2019

Structural integrity assessment of piping components is of paramount important for remaining life prediction, residual strength evaluation and for in-service inspection planning. For accurate prediction of these, a reliable fracture parameter is essential. One of the fracture parameters is stress intensity factor (SIF), which is generally preferred for high strength materials, can be evaluated by using linear elastic fracture mechanics principles. To employ available analytical and numerical procedures for fracture analysis of piping components, it takes considerable amount of time and effort. In view of this, an alternative approach to analytical and finite element analysis, a model based on relevance vector machine (RVM) is developed to predict SIF of part through crack of a piping component under fatigue loading. RVM is based on probabilistic approach and regression and it is established based on Bayesian formulation of a linear model with an appropriate prior that results in a sparse representation. Model for SIF prediction is developed by using MATLAB software wherein 70% of the data has been used for the development of RVM model and rest of the data is used for validation. The predicted SIF is found to be in good agreement with the corresponding analytical solution, and can be used for damage tolerant analysis of structural components.