• Journal of Electrochemical Science and Technology
• /
• v.9 no.3
• /
• pp.220-228
• /
• 2018

This study introduced a carbon-free electrode for $Li-O_2$ cells with the aim of suppressing the side reactions activated by carbon material. Micro-particles of poly(3,4-ethylenedioxythiophene) (PEDOT), a conducting polymer, were used as the base material for the air electrode of $Li-O_2$cells. The PEDOT micro-particles were treated with $H_2SO_4$ to improve their electronic conductivity, and LiBr and CsBr were used as the redox mediators to facilitate the dissociation of there action products in the electrode and reduce the over-potential of the $Li-O_2$ cells. The capacity of the electrode employing PEDOT micro-particles was significantly enhanced via $H_2SO_4$ treatment, which is attributed to the increased electronic conductivity. The considerable capacity enhancement and relatively low over-potential of the electrode employing $H_2SO_4$-treated PEDOT micro-particles indicate that the treated PEDOT micro-particles can act as reaction sites and provide storage space for the reaction products. The cyclic performance of the electrode employing $H_2SO_4$-treated PEDOT micro-particles was superior to that of a carbon electrode. The results of the Fourier-transform infrared spectroscopic analysis showed that the accumulation of residual reaction products during cycling was significantly reduced by introducing the carbon-free electrode based on $H_2SO_4$-treated PEDOT micro-particles, compared with that of the carbon electrode. The cycle life was improved owing to the effect of the redox mediators. The refore, the use of the carbon -free electrode combined with redox mediators could realize excellent cyclic performance and low over-potential simultaneously.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.937-974
• /
• 2016

While extensive efforts have been made in the past to develop finite element models (FEMs) for concrete-filled steel tubular columns (CFSTCs), these models may not be suitable to be used in some cases, especially in view of the utilisation of high strength steel and high strength concrete. A method is presented herein to predict the complete stress-strain curve of concrete subjected to tri-axial compressive stresses caused by axial load coupled with lateral pressure due to the confinement action in square and rectangular CFSTCs with normal and high strength materials. To evaluate the lateral pressure exerted on the concrete in square and rectangular shaped columns, an accurately developed FEM which incorporates the effects of initial local imperfections and residual stresses using the commercial program ABAQUS is adopted. Subsequently, an extensive parametric study is conducted herein to propose an empirical equation for the maximum average lateral pressure, which depends on the material and geometric properties of the columns. The analysis parameters include the concrete compressive strength ($f^{\prime}_c=20-110N/mm^2$), steel yield strength ($f_y=220-850N/mm^2$), width-to-thickness (B/t) ratios in the range of 15-52, as well as the length-to-width (L/B) ratios in the range of 2-4. The predictions of the behaviour, ultimate axial strengths, and failure modes are compared with the available experimental results to verify the accuracy of the models developed. Furthermore, a design model is proposed for short square and rectangular CFSTCs. Additionally, comparisons with the prediction of axial load capacity by using the proposed design model, Australian Standard and Eurocode 4 code provisions for box composite columns are carried out.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.299-311
• /
• 2003

This paper presents a finite element procedure to estimate the ultimate strength of space frames considering spread of plasticity. The improved displacement field is introduced based on the inclusion of second-order terms of finite rotations. All the non-linear terms due to bending moment, torsional moment, and axial force are precisely considered. The concept of plastic hinges is introduced and the incremental load/displacement method is applied for elasto-plastic analyses. The initial yield surface is defined based on the residual stress, and the full plastification surface is considered under the combined action of axial forces, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for the ultimate strength of space frames are compared with available solutions and experimental results.

• Applied Microscopy
• /
• v.13 no.1
• /
• pp.13-30
• /
• 1983

[ $1-{\beta}-D-Arabinofuranosylcytosine$ ](ara-C), which is a pyrimidine nucleoside analog is cytotonic to mammalian cells in culture and is active in vitro and in vivo against a variety of DNA viruses. The precise mechanism of action of ara-C has not been determined, although ara-C is thought to act as an antimetabolite, interfering with the synthesis of deoxyribonucleic acid(DNA). Cytosine arabinoside originally seemed to act principally by inhibiting the conversion of cytidine to deoxytidine, thus inhibiting DNA synthesis. But recent data suggest that effects upon DNA polymerase and effects via incorporation into DNA and RNA may well be of equal importance. The author have demonstrated the effect of cytosine arabinoside on the hepatocytes of albino mice treated with ara-C, observing changes in the cytoplasmic organelles of the hepatocytes. A total of 120 healthy male albino mice were divided into the control and ara-C treated groups. The animals of the ara-C group were given 10mg. per kg of body weight of mouse ara-C in physiological saline solution and the animals of control group were given physiological saline solution, intraperitoneally. After an administration of ara-C or physiological saline solution, the animal were killed at. interval of 6, 12, and 24 hours. The specimens, which were obtained from the left anterier lobe of the liver, were stained with uranyl acetate and lead citrate and observed with JEM 100B electron microscope. The results were obtained as follow: A pronounced dilatation, sacculation and fragmentation of the cisterane of rough endoplasmic reticulum with dissociation of membrane bound-ribosomes, disaggregation of free ribosomes in the cytoplasm, proliferation of the smooth endoplasmic reticulum associated with depletion of glycogen paracles, atrophies of Golgi complex, production of numerous lipid droplets, and formation of antophagic vacuoles, multivesicular bodies and residual bodies are recognized in the hepatocytes of ara-C treated mice. Consequently it is suggested that cytosine arabinoside would induce a changes of the cytoplasmic organelles of the hepatocytes in albino mice.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.8 no.1
• /
• pp.61-71
• /
• 2002

purpose : The purpose of this study was to find out the influencing factors of smoking-cessation behavior of patients with coronary heart disease and to suggest the model of smoking-cessation behavior which was based on the relationship between influencing factors and then to test its fitness empirically. method : This study was based on the Theory of Reasoned Action and a hypothetical model was constructed with fifteen paths in consideration of main predictive factors of smoking-cessation behavior such as biological factor, disease-related characteristics, self-efficacy, supportive factor, environmental factor, disease-related perception factor, intention-to-quit, and psychological factor. The validity of a smoking- cessation model was tested to 264 patients with coronary heart disease by using SPSS 8.0 and Window LISREL 8.12a. results : 1. Seven of the 15 paths of smoking-cessation behavior proved to be significant. 2. The final model excluded three paths in the hypothetical model was demonstrated to be improved by $x^2$=44.31 (df=38, p=.22), Goodness of Fit Index (GFI)=.98, Adjusted Goodness of Fit Index (AGFI)=.96, Non-Normed Fit Index(NNFI)=1.00, Normed Fit Index(NFI)=1.00, and Root Mean Square Residual(RMR)=.24. 3.The smoking-cessation behavior was influenced directly by biological factor, self-efficacy, supportive factor, environmental factor, intention-to-quit, and psychological factor. The smoking-cessation behavior was accounted for 82% of variance by these factors. conclusion : although the adolescents' smoking behavior can be predicted by only smoking intention, it is hard to predict the adults' smoking-cessation behavior by only this factor. Therefore, intention-to-quit, self-efficacy, supportive factor should be improved because these are promotive factors for smoking-cessation behavior. Biological factor, environmental factor, and psychological factor are inhibitive factors, so nicotine replacement therapy is helpful to the high nicotine-dependents, and ex-smokers avoid other smokers in their environment and also patients should learn and practice the stress coping-skills.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.829-838
• /
• 2005

In order to investigate the residual amounts of organochlorines and polychlorinated biphenyls (PCBs) in Korean human tissues (blood, adipose tissue, liver, kidney cortex, and lung), the samples were collected from the autopsied cadavers of 40 men and 40 women (from teens to seventies of age). ${\alpha}-BHC,\;{\beta}-BHC,\;{\gamma}-BHC,\;{\delta}-BHC$, p,p'-DDT, p,p'-DDD, p,p'-DDE, endrin, dieldein, aldrin, and 7 marker PCBs (28, 52, 101, 118, 138, 153, and 180) were determined in human tissues. The levels of organochlorines and PCB congeners indicated that they have been widely distributed in Korean human body. Positive correlations in terms of age were observed for the following cases: p,p'-DDE, p,p'-DDT, ${\Sigma}-DDT$, PCB 118, PCB 138, PCB 153, and ${\Sigma}-PCB$ in the adipose tissue, and p,p'-DDE in the lung. Concentration of these compounds showed a significant age-related increase. Accumulation of these compounds in aged people revealed that these compounds were more slowly eliminated in our environment and risk assessment was necessary for further proper action. Significant differences in the levels of PCBs between genders were found for PCB 118 in the adipose tissue and PCB 138 in the liver. Positive correlation coefficients between tissues were detected with p,p'-DDE and ${\beta}-BHC$.

• Journal of Korean Academy of Nursing
• /
• v.53 no.6
• /
• pp.652-665
• /
• 2023

Purpose: This study aimed to develop a nursing clinical judgment scale (NCJS) and verify its validity and reliability in assessing the clinical judgment of nurses. Methods: A preliminary instrument of the NCJS comprising 38 items was first developed from attributes and indicators derived from a literature review and an in-depth/focus interview with 12 clinical nurses. The preliminary tool was finalized after 7 experts conducted a content validity test based on a data from a preliminary survey of 30 hospital nurses in Korea. Data were collected from 443 ward, intensive care unit, emergency room nurses who voluntarily participated in the survey through offline and online for the verification of the construct validity and reliability of the scale. Results: The final scale comprised 23 items scored on a 5-point Likert scale. Six factors - integrated data analysis, evaluation and reflection on interventions, evidence on interventions, collaboration among health professionals, patient-centered nursing, and collaboration among nurse colleagues - accounted for 64.9% of the total variance. Confirmatory factor analysis supported the fit of the measurement model, comprising six factors (root mean square error of approximation = .07, standardized root mean square residual = .04, comparative fit index = .90). Cronbach's α for all the items was .92. Conclusion: The NCJS is a valid and reliable tool that fully reflects the characteristics of clinical practice, and it can be used effectively to evaluate the clinical judgment of Korean nurses. Future research should reflect the variables influencing clinical judgment and develop an action plan to improve it.

• Journal of Food Hygiene and Safety
• /
• v.23 no.3
• /
• pp.239-247
• /
• 2008

Objective of this study was to investigate residual the levels of heavy metals in rice grain and soils of "Top-Rice" and common rice cultivation areas from 2005 to 2007. Soil and rice grain samples were taken from 33 "Top-rice" areas and neighboring paddies, and analyzed for the elements using ICP-OES and ICP-TOF-MS after acid digestion. A concentration of arsenic in paddy soil was 1.33 mg/kg which was below 1/5-1/11 fold of the threshold levels(concern: 4 mg/kg, action: 10 mg/kg), and paddy soil was 0.06 mg/kg of Cd(cadmium) being below 1/25-1/67 fold of the limits(concern: 1.5 mg/kg, action: 4 mg/kg). A level of Cu(copper) in paddy soil was 4.57 mg/kg which was below 1/11-1/27 fold of the threshold levels(concern: 50 mg/kg, action: 125 mg/kg), and Pb(lead) concentration in paddy soil was found to be a 4.68 mg/kg. In addition, Hg(mercury) concentration in paddy soil was to be a 0.03 mg/kg, which was below 1/131-1/328 fold of the threshold levels(concern: 4 mg/kg, action: 10 mg/kg). The average concentrations of As, Cd, Cu, Pb and Hg in the polished rice samples were 0.037, 0.043, 0.280, 0.048 and 0.002 mg/kg, respectively. These levels are lower than those of other countries in rice grains. Assuming the rice consumption of 205.7 g/day by total dietary supplements in Korea, the amount of total weekly metal intake of As, Cd, Cu, Pb and Hg by polished rice were estimated to be 0.0892, 1.035, 6.712, 1.161 and 0.054 ${\mu}g/kg$ body weigh/week, respectively. The PTWI(%) of As, Cd, Cu, Pb and Hg were 5.95(inorganic arsenic), 0.26(total arsenic), 14.79, 0.19, 4.65 and 1.07% estimated to be 0.0892, 1.035, 6.712, 1.161 and 0.054 ${\mu}g/kg$ body weigh/week, respectively. In conclusion, it was appeared that the heavy metals contamination in the brown and polished rice should not be worried in Korea.

• Korean Journal of Food Science and Technology
• /
• v.24 no.4
• /
• pp.371-375
• /
• 1992

The ${\alpha}-amylase$ from Bacillus licheniformis was purified and its thermostability in the presence of substrate and metal was ions investigated. Comparing D-values of the enzyme obtained in the presence of $Ca^{++}$, $B^{+++}$ and both $Ca^{++}$ and $B^{+++}$, the thermostability of the enzyme was markedly enhanced by the addition of metal ions. $Ca^{++}$ and $B^{+++}$ exhibited a protective action, the former ion being more effective, and both ions showed a synergistic effect. The enthalpy of activation for the thermal inactivation in the presence of metal ion was 320.2 kJ/mole for $Ca^{2+}$ ion, 212.9 kJ/mole for $B^{+++}$, while it was 183.9 kJ/mole in the absence of metal ions. In the thermal inactivation for 30 min at $96^{\circ}C$, the residual activity in the presence of 30% (w/w) starch was 51.0%, whereas the presence of $Ca^{++}$ ion additionally provided a remarkable thermo-resistance.

• Journal of Korea Soil Environment Society
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1998

Soils contaminated with hydrocarbons and residual metals can be effectively treated by soil washing. In developing the soil washing process several major effects for separating contaminants from coarse soils progressively improved upon combinations of mining and chemical processing approaches. The pilot-scale soils washing process consists of the four major parts : 1) abrasive scouring, 2) scrubbing action using a washwater that is sometimes augmented by surfactants or other agents, 3) rinsing, and 4) regenerating the contaminated washwater. The plant was designed based upon the treatment capacity > 5 ton/hr on site. The lumpy contaminated soil fractions first experience deagglomeration and desliming passing through a rolling mill pipe. In the second unit the attrition scrubbing module equipped with paddles uses high-energy to remove contaminants from the soils. And a final rinsing system is assembled to separate the washwater containing the contaminants and very fine soils from the washed coarse soils. For recycling the contaminated washwater passes through a washwater clarifier specifically designed for flocculation, sedimentation and gravity separation of fine as well as flotation and separation of oils from the washwater. In order to more rapidly assess the applicability of soil washing at a potential site while minimizing the expense of mobilization and operation, a mobile-type soil washing process which is self-contained upon a trailer will be further developed.