• Structural Engineering and Mechanics
• /
• v.45 no.4
• /
• pp.455-470
• /
• 2013

RC flat plates that have no flexural stiffness by boundary beams may be governed by a serviceability as well as a strength condition. A construction sequence and its impact on the distributions of construction loads among slabs tied by shores are decisive factors influencing immediate and long term performances of flat plate. Over-loading and tensile cracking in early-aged slabs significantly increase the deflection of a flat plate system under construction. A reshoring work may be helpful in reducing slab deflections by controlling the vertical distributions of construction loads in a multi-shored flat plate system. In this study, a change of construction loads by reshoring works and its effects on deflections of flat plate systems under construction are analyzed. The slab construction loads with various reshoring schemes are defined by a simplified method, and the practical calculation of slab deflections with considering construction sequences and concrete cracking effects is applied. From parametric studies, the reshoring works are verified to reduce construction loads and slab deflections.

• Journal of Information Technology and Architecture
• /
• v.11 no.2
• /
• pp.217-223
• /
• 2014

This paper aims to explain the reasons of manufacturing's reshoring (U-turn) and to suggest the supporting law and policy and the utilization of enterprise architecture (EA) in order to attract reshoring manufacturers into port logistics park. First, this paper found the reasons of reshoring reviewing the previous researches. The reasons are 1) advanced country's manufacturing competitiveness in total production cost compared to the emerging countries such as China, 2) the government policies enhancing the reshoring of their enterprise, and 3) the deterioration of management environment of foreign companies in the emerging countries. Second, this paper reviewed the supporting law and policy of korean government for reshoring manufacurers, and suggested the method to attract them into port logistics park. The current law to support the reshoring manufacturers does not have articles about moving into the port logistics park in order to help global trade from outsourcing countries. Finally, this paper provided the method of utilization of enterprise architecture to help reshoring decision making to get their benefit for the future and collaboration among related government departments with the ministry of maritime affairs and fisheries.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.1
• /
• pp.40-48
• /
• 2017

RC flat plates may be governed by a serviceability as well as a strength condition, and a construction sequence and its impact on the distributions of gravity loads among slabs tied by shores are decisive factors influencing short and long term behaviors of flat plate. Over-loading and tensile cracking in early-aged slabs significantly increase the deflection of a flat plate system under construction, and a reshoring work may be helpful in reducing slab deflections by controlling the vertical distributions of loads in a multi-shored flat plate system. In this study, a effect of reshoring works on short and long term deflections of flat plate systems are analyzed. The slab construction loads with various reshoring schemes and slab design and construction conditions are defined by a simplified method, and the practical calculation of slab deflections with considering construction sequences and concrete cracking and long term effects is applied. From parametric studies, the reshoring works are verified to reduce slab deflections, and the optimized conditions for the reshoring works and slab design and constructions are discussed.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.183-193
• /
• 2020

This study attempts to interpret the causes of offshoring and reshoring, find out facilitating factors and the areas where these happen mainly. In viewpoint of self-organization phenomena, the theory of prospect, quantitative analysis is performed by utilizing actual data of American Reshoring Association. This study shows that offshoring to the U.S. is positively correlated with market power in the U.S. and innovation of investment countries, while reshoring to U.S. is positively correlated with market power in the U.S. not with technology innovation. The reshoring of U.S. companies is influencing offshoring to U.S, emerging countries such as Asia tends to focus offshoring in short catch up cycle area like IT. This study is expected to contribute to investment support policy and decision for optimal production site. Further study will complete the economic benefit assessment model by reinforcing the impact factors of reshoring and offshoring.

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.241-251
• /
• 2022

As a 4th industrial revolution technology, robots are changing the form of labor market and trade in Korea. In the future, changes in the international trade order are expected to move in the direction of shortening global supply chains and restricting trade between countries. Accordingly, reshoring of relocating overseas production facilities to Korea or near-shoring of relocating overseas production facilities to neighboring allies may expand. In this context, this study analyzed the impact of robot introduction on the domestic labor market and trade based on firm-level data. As a result of analysis based on the 'business activity data' accumulated from 2017 to 2019, the introduction of robot technology was analyzed to expand low-wage, low-skilled employment. Analysis on trade shows that the introduction of robots decreases exports and increases imports. In order to expand exports through the technology of the 4th industrial revolution, employment expansion and robot introduction should occur at the same time, rather than replacing the labor force with robots. In addition, it is thought that reshoring's goal of risk management can be achieved when a stable supply chain for imports of raw materials or essential goods, which are difficult to transfer to Korea, is established together.

• Journal of the Korea Concrete Institute
• /
• v.13 no.6
• /
• pp.629-636
• /
• 2001

To apply the research results to the design and the construction of the high rise buildings, long-term behavior of reinforced concrete structure have been widely studied. However, shoring and reshoring at early ages have not been considered in the most of studies. The removal of forms and shores has been dealt with one construction sequence. i.e. the deformation occurred at the early age before the removal of shore has been neglected. In this paper, two-dimensional frame analysis program for long-term behavior of reinforced concrete was developed. In the developed program, construction sequence including the settlement and the removal of shores is considered to predict axial force variation due to forms ,shores, and time-dependent concrete stiffness. Analysis results show that the time-dependent axial force of shores is reduced, and the redistributed axial force of the interior column is greater than the value by elastic analysis and that of the exterior column is smaller. In order to demonstrate the validity of this program, the test frame was constructed in sequence of the placement of concrete, form removal, reshoring, shore removal, and the application of additional load. The proposed program predicts experimental results well.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.385-392
• /
• 2014

Reshoring makes slab deflect and support its own weight. The construction loads on the slabs in lower levels decrease using the reshoring. Simplified analysis proposed by ACI 347.2R-05 showed that if the reshoring is applied, construction loads on slabs and shores, and quantities of forms and shores decreased by 40%, 23%, 40%, and 50%, respectively. Shores' loads were comparatively measured on site. The measured reshore load was half of the load before removing the shores and was also lower than the measured shore load by 35%. To verify the safety of the reshoring, deflections of beams and strains of beam longitudinal bars were also measured. The maximum deflection was only L/5000 and the maximum bar strain was only 3.6% of the yield strain. Consequently, reshoring neither cause problems on the safety nor serviceability. In addition, the beam load was expected from the measured shores' loads and it coincides well with the predicted value by the simplified analysis of ACI 347.2R-05.

• Structural Engineering and Mechanics
• /
• v.64 no.2
• /
• pp.173-181
• /
• 2017

This paper analyzes the influence of the construction process on short- and long-term deflections on a reinforced concrete structure poured on-site by a portable industrialized system. A parametric analysis was carried out by the Finite Elements Method (FEM) that considered: a) type of construction process with reshoring or clearing (partial striking); b) the number of successively shored floors and c) the number of shores used on each floor. All three factors were especially important for the values of short- and long-term deflections, which were highest in the reshoring processes with the lowest number of successively shored floors and the lowest number of shores per floor. Deflections obtained were compared with the limits laid down by ACI 318-14 and as calculated by this code's simplified method. The long-term deflections were seen to be almost double than those obtained by applying the ACI 318-14 code's simplified method and in some cases these deflections were above the established limits. It can thus be concluded that the load history of a building under construction should be taken into account in order to satisfy a structure's in-service conditions and durability.

• Electronics and Telecommunications Trends
• /
• v.33 no.4
• /
• pp.81-91
• /
• 2018

The purpose of this article is to abstract Industries 4.0 Top documents and express the fundamental strategies. It is clear that disruptive AI + ICBM technology will change the entire industry, and therefore each country is making a strategy to prepare for the future. Example cases are Japan's Monozukuri, Germany's Industry 4.0, the USA's Reshoring, and China's Made in China 2025. I would like to introduce Industrial Industries 4.0 in Germany because Germany used the industrial industries' term first and Korea has as many SMEs as Germany has. The main characteristic is that it can be applied to the size of the individual SMEs rather than the national size.

• Korea Trade Review
• /
• v.46 no.2
• /
• pp.141-160
• /
• 2021

The scale of global FDI has been decreasing since 2016 due to the ongoing US-China trade dispute, the strengthening of FDI inflow screening regulations with concern over strategic technology leaks, and the spread of reshoring trends due to the reinforcement of national preferences. Eventually, the competition to attract FDI between countries is expected to become more intense. Therefore, in order to attract high-quality FDI for Korea that will contribute to the development of the national economy, it is pressing to evaluate and improve the domestic FDI attraction environment. This study aims to analyze which areas of Korea's economic and non-economic environments need improvement for gaining advantage amid the fierce competition to attract FDI between countries, by the relative comparison between Korea and the U.S., and based on the ranking indicated in key FDI attractiveness indices. As a result, improvement is needed in the following areas. First, according to IMD's "World Competitiveness Ranking 2020," Korea was inferior to the US in terms of business efficiency, productivity, finance and business legislation in terms of government efficiency. Second, according to INSEAD's "Global Talent Competitiveness Index 2020," Korea was inferior to the US in terms of internal openness, external openness, employability, lifelong learning, access to growth opportunity, and business and labor landscapes. Third, according to WEF's "Global Competitiveness Index 2019", Korea was inferior to the US in terms of product market, labor market, business dynamism and workforce skills.