• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.385-389
• /
• 2012

Significant improvements in the switching voltage distribution are required for the development of unipolar resistive memory devices using $MnO_x$ thin films. The $V_{set}$ of the as-grown $MnO_x$ film ranged from 1 to 6.2 V, whereas the $V_{set}$ of the oxygen-annealed film ranged from 2.3 to 3 V. An excess of oxygen in an $MnO_x$ film leads to an increase in $Mn^{4+}$ content at the $MnO_x$ film surface with a subsequent change in the $Mn^{4+}/Mn^{3+}$ ratio at the surface. This was attributed to the change in $Mn^{4+}/Mn^{3+}$ ratios at the $MnO_x$ surface and to grain growth. Oxygen annealing is a possible solution for improving the switching voltage distribution of $MnO_x$ thin films. In addition, crystalline $MnO_x$ can help stabilize the $V_{set}$ and $V_{reset}$ distribution in memory switching in a Ti/$MnO_x$/Pt structure. The improved uniformity was attributed not only to the change of the crystallinity but also to the redox reaction at the interface between Ti and $MnO_x$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1057-1063
• /
• 2015

This paper proposes a new nonlinear filtering algorithm that combines the unscented Kalman filter (UKF) and the finite impulse response (FIR) filter. The proposed filter is called the unscented Kalman/FIR hybrid filter (UKFHF). In the UKFHF algorithm, the UKF is used as the main filter, which produces state estimates under ideal conditions. When failures of the UKF are detected, the FIR filter is operated. Using the output of the FIR filter, the UKF is reset and rebooted. In this way, the UKFHF recovers from failures. The proposed UKFHF is applied to indoor human localization using wireless sensor networks. Through simulations, the performance of the UKFHF is demonstrated in comparison with that of the UKF.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.379-388
• /
• 1998

In this paper we propose a DMR-II shared-medium access control protocol which was developed for the ATM access network users to support isochronous and non-isochronous traffics simultaneously under the bandwidth sharing environment, and describe its architecture and operation principles. The DMR-II protocol uses the slotted-ring topology, and gives the higher transmission priority to the isochronous traffic than the non-isochronous traffic. To support the isochronous traffic it uses the slot reservation mechanism, and maintains the delay variation of the isochronous traffic beyond the threshold value by using the blocking mechanism whenever the total user traffic overflows the network's bandwidth limitation. for the non-isochronous traffic the DMR-II protocol lets all the nodes to have fair transmission chances by using the reset mechanism based on the window counter scheme.

• Archives of Obesity and Metabolism
• /
• v.2 no.1
• /
• pp.6-10
• /
• 2023

Compensatory changes in energy consumption and neuro-hormonal changes following weight loss make it difficult to maintain the reduced weight and may cause weight regain. Therefore, establishing a long-term weight control plan and strategy starting from the initial weight loss period is necessary. Both the patient and doctor should know that weight loss cannot occur continuously, and that maintaining weight after the weight loss period is the basic course of obesity treatment. No single dietary pattern is effective for weight maintenance, and a variety of dietary control methods - such as calorie restriction and healthy proportions of carbohydrates, proteins, fats, and meal replacements - should be used to target an integrated and healthy dietary habit. An increase in physical activity is needed for weight loss and maintenance; however, rather than recommending an excessive amount of exercise, it is better to set realistic and long-term achievable goals. It is necessary to reset the goal according to the patient's weight maintenance stage and continuously apply behavioral therapies, such as self-monitoring and stress management. In previous studies, since the degree of weight loss and changes in behavioral patterns over the course of one year were important factors in maintaining long-term weight loss, obesity therapists should closely examine patient data and behavioral patterns across a period of one year and actively intervene when needed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.200-209
• /
• 2018

This study proposed a method to select existing facilities as a landmark in order to reset accumulated errors of dead reckoning in a tunnel difficult to receive GNSS signals in automated driving. First, related standards and regulations were reviewed in order to survey 'variety' on shapes and installation locations as a feature of facilities. Second, 'recognition' on facilities was examined using image and Lidar sensors. Last, 'regularity' in terms of installation locations and intervals was surveyed through related references. The results of this study selected a fire fighting box / lamp (50m), an evacuation corridor lamp (300m), a lane control system (500m), a maximum / minimum speed limit sign and a jet fan as a candidate landmark to reset positioning errors. Based on those facilities, it was determined that error correction was possible. The results of this study are expected to be used in repositioning of automated driving vehicles in a tunnel.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.400-408
• /
• 2007

In this paper, development of the 8kW parallel module converter is presented. For a effective configuration of FB-PWM converter, this paper proposes 4-parallel operation of 2 kw-module. FB converter of 2-kW module is controlled by phase shut PWM and in order to achieve ZVZCS, the simple auxiliary circuit is applied in secondary side. In order to achieve ZCS, control logic for auxiliary circuit operation is designed to reset the primary current during free-wheeling period. For output current sharing of 4-modules, the charge control is employed. The charge control logic is designed with phase shift PWM logic. Voltage controller is implemented by using DSP(TMS320LF2406) with A/D conversion data of the output current and voltage of each module. The developed converter is installed in PCU(Power Conditioning Unit) for HSG(High Speed Generator) in a vehicle and health monitoring system is implemented for vehicle operation test. Finally, performance of the developed converter is proved under practical operation of HSG.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.22-30
• /
• 2015

Enterprises should set up realizable goals and continually control the goals from apprehending whether they can be realized or not so that the enterprises grow consistently. Furthermore, from supplementing parts to be improved, goals are reset and the result should be controlled in order to fit to them. Lately, a lot of discussions about the results of organizations, projects, and companies are being realized in construction field. Particularly, in construction management, effective and professional control activities throughout the life cycle of facilities as well as the stage of business implementation of construction work are needed. About the result measurement of the construction management, lots of most domestic researches stay in the level of establishing basic concepts. Also, since characteristics of the construction field and the construction management were not reflected properly, it is in a situation that the result control system is not applied to on-site real works. Hence, this study intends to suggest fundamental data for measuring objective results from extracting result areas and key performance indicators of the construction management using Balanced Score Card.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.252-257
• /
• 2017

In this paper for developing and implementing the HD level triple streaming hybrid security camera which output the three type of video outputs(HD-SDI, EX-SDI, Analog). We design the hardware and program the firmware supporting the main and sub functions. We use MN34229PL as image sensor, EN778, EN331 as image processor, KA909A as reset, iris, day&night function part, A3901SEJTR-T as zoom/focus control part. We request the performance test of developed security camera at the broadcasting and communication fusion testing department of TTA (Telecommunication Technology Association). We can get the three outputs (HD-SDI, EX-SDI, Analog) from the developed security camera, get the world best level at the jitter and eye pattern amplitude value and exceed the world best level at the signal/noise ratio, and minium illumination, power consumption part. The HD level triple streaming hybrid security camera in this paper will be widely used at the security camera because of the better performance and function.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.13-16
• /
• 2003

In this work, we have studied about an RSFQ (Rapid Single Flux Quantum) switch element. The circuit was designed, simulated, and laid out for mask fabrication. The switch cell was composed of a D flip-flop, a splitter, a confluence buffer, and a switch core. The switch core determined if the input data could pass to the output. “On” and o“off” controls in the switch core could be possible by utilizing an RS flip-flop. When a control pulse was input to the “on” port, the RS flip-flop was in the set state and passed the input pulses to the output port. When a pulse was input to the “off” port, the RS flip-flop was in the reset state and prevented the input pulses from transferring to the output port. We simulated and optimized the switch element circuit by using Xic, WRspice, and Julia. The minimum circuit margins in simulations were more than $\pm$20%. We also performed the mask layout of the circuit by using Xic and Lmeter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2441-2446
• /
• 2009

Wireless Sensor Network collects a data from the specific area and the control is composed of small sensor nodes. Like this sensors to after that is established at the beginning are operated with the battery, the operational duration until several years must be continued from several months and will be able to apply the resources which is restricted in efficiently there must be. In this paper RHC (rounting history cache) applies in Directed Diffusion which apply a data central concept a reliability and an efficiency in data transfer course set. RHC algorithms which proposes each sensor node updated RHC of oneself with periodic and because storing the optimization course the course and, every event occurrence hour they reset the energy is wasted the fact that a reliability with minimization of duplication message improved.