• Journal of Institute of Convergence Technology
• /
• v.9 no.1
• /
• pp.21-24
• /
• 2019

This research presents an development of impact damper for reduction of vehicle vibration from road excitation. The structural vibrations are transferred through the vehicle body. The impact damper for reducing structural vibration from road excitation were designed and derived by using simplified numerical model. To analyze the characteristics of the impact damper, the vibration of simplified beam attached to impact damper was simulated. The damping ratios for different mass ratios of the impact dampers were calculated. The numerical results can be utilized to reduce the radiated noise from the electric vehicle.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.341-354
• /
• 2011

Analyzing the relationships among the parameters for quantifying the quality of research published in journals is a challenging task. In this paper, we analyze the relationships between the impact factor, h-index, and g-index of a journal. To keep our analysis simple and easy to understand, we consider a generalized version of the impact factor where there is no time window. In the absence of the time window, the impact factor converges to the number of citations received per paper. This is not only justified for the impact factor, it also simplifies the analysis of the h-index and g-index as well because addition of a time window in the form of years complicates the computation of indices too. We derive the expressions for the relationships among impact factor, h index, and g-index and validate them using a given set of publication-citation data.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.6 no.1
• /
• pp.15-23
• /
• 1981

This paper deals with cross impact analysis for technology assessment. The focus of the paper is to develop new technique of cross impact matrix using goal programming method. In this study, the idea of cross impact analysis based on scenario generation method especially SMIC-74 (2) is expanded. Critical literature review on SMIC-74 is presented to discuss the mathematical rationale of consistent probability in cross impact analysis. A new model of cross impact analysis using goal programming to overcome the shortcomings of the scenario generation technique especially SMIC-74 is developed. This new technique is also applied to the assessment of the air pollution problems in Seoul Metropolitan area in Korea. The results of analysis give us following findings 1) Cross impact analysis using goal programming produce more meaningful solutions comparing to those of SMIC-74 2) Theoretical rationale of the objective function in the newly developed technique is more appropriate than that of SMIC-74.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.27 no.1
• /
• pp.1-17
• /
• 2002

The objective of this paper is to develop a new priority setting algorithm that considers the cross-impact of the future technology alternatives and that satisfies the final goal of the technology management through multi-hierarchy evaluation criteria. By combining the Analytic Hierarchy Process (AHP) model, which is a well-known priority setting model, and Cross Impact Analysis (CIA) model, which is a technological forecasting method that considers cross-impact among R&D Items, we developed an Integrated Cross-Impact Hierarchical (CIH) model, which sets the priority by considering technological forecasting and technology dependency simultaneously. A step-by-step numerical example of the model developed here is presented as backup of its practicality.

• Journal of Environmental Impact Assessment
• /
• v.18 no.3
• /
• pp.131-141
• /
• 2009

We studied improvement in marine environmental impact assessment and related management systems of coastal sediments that are dredged inshore but disposed offshore. After reviewing and diagnosing the existing assessment procedures and problems, we recommend to design the core assessment items and improve the reliability of assessment byenhancing the quality assurance/quality control (QA/QC) and verification processes. We proposed eco-friendly disposal plan for dredging sediment such as reuse system in land development was explored. A marine environmental database system was established to support the assessment processes. Guidelines for marine research and modelling were proposed for improving assessment of dredging and disposal of coastal sediment. Also, applying of screening and scoping for marine environmental assessment was reviewed.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.330-335
• /
• 2004

The needs of walking assistive device such as the Ankle Foot Orthosis (A.F.O.) are getting greater than before. However, most of the A.F.O. are generally imported rather than domestic manufacturing. The major reason of high import reliability is the rack of impact properties of domestic commercial products. Therefore, this research is going to focus on the evaluation of impact properties of the A.F.O. which has the high import reliability. Unfortunately, these kinds of researches are not performed sufficiently. This research is going to evaluate impact energy behavior in composite materials such as the glass/epoxy (S-glass, $[0/90]_{2S}$) and the aramid/epoxy (Kevlar-29, woven type, 8 ply) of ankle foot orthosis. The approach methods were as follows. 1) The history of impact load and impact energy due to the various velocities. 2) Relationship between the deflection and damage shape according to the impact velocities. 3) The behavior of absorbed energy and residual strength rate due to the various impact velocities.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.569-582
• /
• 2018

The purpose of this study is to verify the impact protection performance and to evaluate the activity, design, fit, and pad characteristics of the fall impact protection clothing for elderly women. The protective clothing was designed as pants type and underwear type, and an impact protection pad in the form of a tightly connected regular hexagon piece was inserted in the hip and hip joints. The pad was made of two kinds of foam single pad and foam and gel combination pad so that they could be inserted into pants type and underwear type, respectively. The results of the shock absorption performance of the fall impact protective clothing showed that when the impact force of 4601N was applied to the pants type protective clothing, the impact force was reduced by 29% in the foam pad type and 26% in the gel and foam pad type. When the force of 5113N was applied to the underwear type, it decreased by 40% in the foam pad type and by 34% in the gel and foam pad type. As a result of wearing evaluation of subject group, it was found that fit and activity of underwear type was better than that of pants type. Foam pad type was evaluated to be lighter than gel and foam pad type in both the subject and the expert group and the gel and foam pad was evaluated to be more flexible in the expert group.

• Journal of Environmental Impact Assessment
• /
• v.19 no.3
• /
• pp.335-345
• /
• 2010

This paper assessed environmental impacts of marine sand mining on coastal areas and Exclusive Economic Zones (EEZs) of Korea, and diagnosed problems of the related assessment statements for suggesting key assessment items (scoping) and system improvement. To mitigate conflicts and environmental impacts caused by large-scale, concentrated sand mining, we suggest it is critical to promote sustainable and eco-friendly utilization of marine resources while listening opinions from various stakeholders and analyzing alternative plans. Especially, it should be mandatory as a scoping item to provide verifiable data on the amount of sand, potential and accumulative impacts by mining, and key assessment items (e.g. erosion and sedimentation by submarine topography, benthic change, spreading of suspended solids, water pollution, grain-size change, and impact on fisheries resources). We also suggest that postassessment and monitoring should be improved to enable tracking of environmental impacts caused by sand mining through seasonal monitoring together with intermittent short-term surveys. In addition, effective measures to mitigate the impacts is also essential. As repeated sand mining at large-scale can damage marine ecosystems by long-term accumulated impacts, we suggest that assessment systems and regulatory policies should be developed and established, especially for ensuring reliability of assessment and review on selected major sandmining projects.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.12-19
• /
• 2006

It is positively necessary to study on the stiffness of a 13degree-type impact tester in order to improve the fracture prediction of impact testing in wheels using FE(finite-element) analysis. The 13degree-type impact tester consists of an impact striker, a wheel fixer, a steel plate, and four cylindrical rubbers. Important parts of the tester are the steel plate and four cylindrical rubbers which play a role of absorbing impact energy during impact testing. Because of these buffers, the RF(reaction force) variation of the lower part in the 13degree-type impact tester showed the tendency like a damped harmony oscillation during impact testing. In order to investigate the stiffness of a 13degree-type impact tester, this work measured each stiffness of a steel plate and cylindrical rubbers. The stiffness of a cylindrical rubber was measured using a compressive tester. On the other hand, the stiffness of a steel plate was predicted by simulating experimental method using FE analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.3
• /
• pp.495-505
• /
• 2016

This study explores and selects an appropriate material that considers light and soft physical properties as well as activity for impact absorption pads that can be used to develop practical impact protective clothes worn during daily life by the elderly to reduce the impact of falls. Physical properties, impact absorption performance, and compression characteristics were evaluated on 5 types of foam, 2 types of 3D spacer fabric, and 3 types of polymer gel to select a material appropriate for the pad to be inserted into impact protective clothes. The evaluation of the physical properties showed that 3D spacer fabrics had lower density compared to other materials and polymer gels had the highest density. The elongation percentage was higher in foams than 3D spacer fabrics and EPDM foam had the highest elongation percentage. The impact absorption performance of honeycomb polymer gel was better than foams and 3D spacer fabrics. As a result of looking into compression energy and compression characteristics of materials, 'CR foam A' was found to absorb the largest amount of compression energy, 24.1%, among foams and polymer gels. A high energy absorption rate of 50.0% (or above) was indicated by 3D spacer fabrics; however, foams and polymer gels showed a progressive deformation of energy compression / recovery curve with 3D spacer fabrics that showed drastic deformation. Based on characteristics of materials, 'CR foam C' and EPDM with relatively high absorption performance can be used as protective pad materials among foams. Among polymer gels, 2 open-type polymer gels that have relatively low impact protective performance but a relatively lighter weight on human body (compared to closed-type) are considered appropriate protective pad materials.