• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.

• 해양환경안전학회지
• /
• 제11권1호
• /
• pp.77-82
• /
• 2005

동해의 심층수 형성은 크게 대륙주변부 대류와 외양대류에 의한 것으로 알려져 있다. Vladivostok 연안과 subpolar front사이에서 겨울철에 발생하는 심층수의 형성은 외양대류에 의한 가능성이 높은 것으로 설명되고 있으며, 침니 현상이 이러한 결과를 됫받침 하고 있다. 본 논문에서는 외양대류에 의한 심층수 형성과정의 초기단계 즉 침니 현상의 전 단계에 나타나는 현상을 포텐셜 와도, 지형류, 수온, 염분, 용존산소의 분포로부터 확인하였다. 포텐셜와도의 분포에서 나타난 와동류는 Vladivostok 연안과 subpolar front 사이에 위치하며, 와동류의 분포 위치는 겨울철 심층수 형성 가능성이 높은 해역과 잘 일치한다. 특히 대륙의 지형적인 특성으로 인한 바람장의 변화는 본 연구에서 나타난 시계반대방향의 와동류가 형성될 수 있음을 보여주며, 그 결과로 나타나는 dome 구조의 밀도 분포는 외양대류의 초기 단계에서 나타나는 현상을 잘 보여준다.

• 복식문화연구
• /
• 제25권4호
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• Human Ecology Research
• /
• 제56권1호
• /
• pp.15-32
• /
• 2018

This study analyzes difference in consumers' and front-line workers' perceptions on 'consumer complaint behavior with hateful intentions' though the Co-orientation Model in three dimensions. In addition, we seek to contribute to reducing the conflict between consumers and front-line workers in the service contact point by finding factors that affect the difference in perception between two parties. This study findings and implications are as follows. First, Taking a look at the mutual orientation between consumers and front-line workers, mutual perceptions have been found to match in agreement but with a significant difference in perceived agreement (congruence), which indicates that the internal perceptions of both consumers and front-line workers do not match. The findings confirm that consumers and front-line workers have different perspectives on consumer complaint behavior with hateful intentions and therefore raise a need for efforts and institutional devices for improvement. Second, the study has found that consumers' economic responsibility as part of their social responsibilities and front-line workers' perceptions on consumers' civic responsibility affect the perception difference between these two groups and suggest a need for educating consumers about economic responsibility. Meanwhile, unlike consumers, front-line workers view consumers' complaint behavior with hateful intentions from an ethical point of view, raising a need for a transition of perspectives on complaint behavior with hateful intentions.

• 복식
• /
• 제56권2호
• /
• pp.101-111
• /
• 2006

The purpose of this research is to define body shapes of Plus-sized women at ages between 21 and 69 whose satisfied the Plus-sized judgment criteria took part in this study. This research also classifies different body types, and provides basic data for designing prototypes according to each body type. Based on factor analysis of the measured data, nine key factors are grouped. And four different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall and characterized by 'Y' body shape when looked from the front. Looking from the side, this type is comparatively balanced obese type which has flat breast and abdomen, and which has a jutting back and buttocks. Type 2 refers to those who are the shortest of all the obese with 'X' front. This type is Sway-back shape which has jutting back and abdomen but flat buttocks when looked from the side. Type 3 is characterized by 'H' body shape when looked from the front. This type is Pway-back shape which has flat back, abdomen and buttocks when looked from the side. The prominent breast part of this type is the most outstanding figure. Type 4 is characterized by 'X' when looked from the front. This type has a jutting waist and prominent buttocks when looked from the side.

• 한국축산시설환경학회지
• /
• 제8권3호
• /
• pp.159-164
• /
• 2002

The distance between teats of each head on twenty heads of holstein was measured in Nation Livestock Research Institute of Rural Development Administration to find design variables on the teat-cup attachment system of the auto-milking system before milking. The distance between teats was tested by the steps for milk producing in the morning and evening. The results from this study is summarized as follow. 1 The maximum and minimum length between front teats were 297mm and 112mm respectively, the maximum and minimum length between rear teats were 231mm and 36mm and the maximum and minimum length between left front and left rear were 220 and 84mm. And the maximum length of right front and right rear were 205mm and 90mm. A relative position of the each teats was asymmetric. 2. The size of teats, the length between front teats, and the length between rear teats by lactating period were very much changed for its milking. 3. The design variables on the teat-cup attachment system was found by the length between each teats tested. Since the position of teat-cup is changed by milking environment for a cow to milk, the design variables should be considered to be asymmetric area between four teat of COW.

• 한국약용작물학회지
• /
• 제18권1호
• /
• pp.51-55
• /
• 2010

This study was conducted to investigate the effect of planting position on the growth characteristics, yield and ginsenoside content in Panax ginseng C.A. Meyer at different growth stages. Referring to shoot growth characteristics, stem length, stem diameter and leave area were higher at front than rear, increasing as the proceeding of growth stages. But a lower chlorophyll contents was caused at front compared to rear and decreased as the proceeding of growth stages contrarily. According to root characteristics, root length and main body length were higher at front, with a positive correlation to growth stages, which was also shown on fresh root weight and dry root weight with the maximum in August. Meanwhile, the effect of planting position on ginsenoside content could also be definite by the highest content at front showing high light intensity, increasing as the proceeding of growth stages as well.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.202-215
• /
• 2015

This paper investigates the stability and performance of model predictive controlled active-front-end (AFE) rectifiers for energy storage systems, which has been increasingly applied in power distribution sectors and in renewable energy sources to ensure an uninterruptable power supply. The model predictive control (MPC) algorithm utilizes the discrete behavior of power converters to determine appropriate switching states by defining a cost function. The stability of the MPC algorithm is analyzed with the discrete z-domain response and the nonlinear simulation model. The results confirms that the control method of the active-front-end (AFE) rectifier is stable, and that is operates with an infinite gain margin and a very fast dynamic response. Moreover, the performance of the MPC controlled AFE rectifier is verified with a 3.0 kW experimental system. This shows that the MPC controlled AFE rectifier operates with a unity power factor, an acceptable THD (4.0 %) level for the input current and a very low DC voltage ripple. Finally, an efficiency comparison is performed between the MPC and the VOC-based PWM controllers for AFE rectifiers. This comparison demonstrates the effectiveness of the MPC controller.

• 대한건축학회논문집:계획계
• /
• 제35권2호
• /
• pp.73-82
• /
• 2019

The purpose of this study was to analyze the area of the southern gate in ancient temples. As the southern gate played a role of the front gate, the national or royal ceremonies had been held around the southern gates. The ancient southern gate of temples has had the place for the huge ceremonies such as a royal parade and an inspection of troops. Moreover, this place was recorded in the 'Samkooksagi(三國史記)' as Jeon-Ro(前路). The Southern gate and the Jeon-Ro had been planned together in the front area of the ancient temples, and the gate had been designed to look down the Jeon-Ro. These findings can be verified through the result of a recent excavation at a site of Hwangnyongsa temple in Gyeongju. This research confirmed that the huge ceremonies had been held at the Jeon-Ro including the area of southern gates. Furthermore, a Hwangnyongsa temple is regarded as a concrete case of verifying the composition of the area of Southern gate.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.487-488
• /
• 2006

In these days, demand of a LCD monitor is remarkably increasing with development of the LCD technology. However, there are thermal problems for improvement of efficiency for the LCD monitor. Thus, this research analyzed thermal problems such as convection and conduction heat transfer characteristics in the LCD monitor using an infrared (IR) camera. Also, the results of the outer side of the front LCD panel using the IR camera have been compared with the results of the inner side of the front panel using T-type thermocouples. The equations have been derived for the temperature distribution of the inner side of the front LCD panel by a multiple regression method including variables for ambient temperature, humidity and temperature differences between the front and back panels of the LCD monitor.