• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5B
• /
• pp.430-441
• /
• 2006

As the various A/V devices and home networks are delivered to users, home networks are changing to an entertainment network. It is expected that the required network bandwidth and the amount of usage of media content in home entertainment networks will be increased. Although the access networks and home networks becoming a high speed network, there remains the problems for QoS-guaranteed media content transfer in home networks. Also, in the home network, there can be network traffic caused by applications like video conferencing, video telephone, and VoIP(voice over IP) as well as inner network traffic of home network. Since media content transfer requires the real-time delivery, it is very important and basic requirement that is to transfer media content to A/V device user wants while keeping the media quality. Even though there are many middleware protocol for home networking, they provide basic device discovery and control or simple functions for QoS-guaranteed media content transfer that are not enough to provide QoS-guaranteed media transfer service that user wants. Thus, in this paper, we propose the technique based on UPnP(universal plug and play) protocol for QoS-guaranteed media content transfer in the home network. The proposed technique is compatible with UPnP and can be used with UPnP as additional functions. In this paper, we utilize VideoLAN application to verify the proposed technique. We add the additional modules that support the proposed technique's function to VideoLAN and we verify the its functions through various test scenarios.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.1009-1016
• /
• 2006

Under foundational precepts of Grid computing, two important requirements that all Grid application systems should satisfy are to accommodate the dynamic nature of Virtual Organizations (VOs), and to enforce different levels of security among different VOs. For the research described in this paper, we developed two different use-case scenarios addressing the two requirements, and then showed how the requirements can be met by implementing a Grid information retrieval (GIR) system prototype. The dynamic nature of VO applies not only to increasing and decreasing number of users, but also to the dynamically changing requirement of computing power among the different subcomponents that consist in overall system configuration. This implies that a request to increase computing power by a certain subcomponent can be satisfied by other idling subcomponents taking advantage of overall system flexibility. This paper describes how we implemented a Grid IR system using VO and security mechanisms provided by Globus toolkit 3.0, and shows how GIR system scalability and security can be improved for dynamic VOs. In order to manage different VOs, we implemented VO management service (VOMS), and registered it to Globus as an additional service.

• Journal of KIISE:Software and Applications
• /
• v.29 no.4
• /
• pp.211-224
• /
• 2002

As system become larger and more complex, it is important to correctly analyze and specify user's requirements. Use case modeling is widely used in Object-Oriented Analysis and Design(OOAD) and Component-Based Development(CBD). It is useful to mitigate the complexity of the requirements analysis. However, use cases are difficult to be structured, to explicitly represent non-functional requirements, and to analyze what is affected by changes of use cases. To alleviate these problems, we propose scenario-based goal-oriented approach for use case modeling. The approach is to apply goal-oriented analysis method to use case model. Since goal-oriented analysis method is not systematic and heuristics is considerably involved, we adopted scenarios as the basis for the goal extraction. The proposed method is applied to City Bus Information Subsystem(CBIS) in Intelligent Transport Systems(ITS) domain. The proposed approach helps software engineer to analyze what is affected by use case's changes and represent non-functional requirements.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.123-129
• /
• 2009

Ubiquitous home is emerging as the future digital home environments that provide various ubiquitous home services like u-Life, u-Health, etc. It is composed of some home appliances and sensors which are connected through wired/wireless network. Ubiquitous home services become aware of user's context with the information gathered from sensors and make home appliances adapt to the current home situation for maximizing user convenience. In these context-aware home environments, it is the one of significant research topics to predict user behaviors in order to proactively control the home environment. In this paper, we propose Multi-Level prediction algorithm for context-aware services in ubiquitous home environment. The algorithm has two phases, prediction and execution. In the first prediction phase, the next location of user is predicted using tree algorithm with information on users, time, location, devices. In the second execution phase, our table matching method decides home appliances to run according to the prediction, device's location, and user requirement. Since usually home appliances operate together rather than separately, our approach introduces the concept of mode service, so that it is possible to control multiple devices as well as a single one. We also devised some scenarios for the conceptual verification and validated our algorithm through simulations.

• Journal of Korea Water Resources Association
• /
• v.41 no.3
• /
• pp.293-303
• /
• 2008

Reservoir turbidity flows degrade the efficiency and sustainability of water supply system in many countries located in monsoon climate region. A decision support system called RTMMS aimed to assist reservoir operations was developed for the real time monitoring, modeling, and management of turbidity flows induced by flood runoffs in Daecheong reservoir. RTMMS consists of a real time data acquisition module that collects and stores field monitoring data, a data assimilation module that assists pre-processing of model input data, a two dimensional numerical model for the simulation of reservoir hydrodynamics and turbidity, and a post-processor that aids the analysis of simulation results and alternative management scenarios. RTMMS was calibrated using field data obtained during the flood season of 2004, and applied to real-time simulations of flood events occurred on July of 2006 for assessing its predictive capability. The system showed fairly satisfactory performance in reproducing the density flow regimes and fate of turbidity plumes in the reservoir with efficient computation time that is a vital requirement for a real time application. The configurations of RTMMS suggested in this study can be adopted in many reservoirs that have similar turbidity issues for better management of water supply utilities and downstream aquatic ecosystem.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.18-31
• /
• 1989

To analyze the impact of air pollution control on electricity generation cost, a computer program was developed. POGEN calculates levelized discounted power generation cost including additional air pollution control cost for coal power plant. Pollution subprogram calculates total capital and variable costs using governing equations for flue gas control. The costs are used as additional input for levelized discounted power generation cost subprogram. Pollution output for Rue Gas Desulphurization direct cost was verified using published cost data of well experienced industrialized countries. The power generation costs for the year 2001 were estimated by POGEN for three different regulatory scenarios imposed on coal power plant, and by levelized discounted power generation cost subprogram for nuclear power. Because of uncertainty expected in input variables for future plants, sensitivity and uncertainty analysis were made to check the importance and uncertainty propagation of the input variables using Latin Hypercube Sampling and Multiple Least Square method. Most sensitive parameter for levelized discounted power generation cost is discount rate for both nuclear and coal. The control cost for flue gas alone reaches additional 9-11 mills/kWh with standard deviation less than 1.3 mills/kWh. This cost will be nearly 20% of power generation cost and 40% of one GW capacity coal power plant investment cost. With 90% confidence, the generation cost of nuclear power plant will be 32.6-51.9 mills/kWh, and for the coal power plant it will be 45.5-50.5 mills/kWh. Nuclear is favorable with 95% confidence under stringent future regulatory requirement in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.155-163
• /
• 2012

At present the letter sizes of traffic sign are variously designated as 22 cm through 60 cm, however the basis for determination has not been found so far. Driver's visual acuity for getting a driver licence is required higher than 0.5. In order to interpret the information of traffic signs effectively, the minimum requirement of driver's visual acuity must be applied to determine the letter size of traffic sign. Therefore we reviewed that a driver with visual acuity of 0.5 could read the current letter sizes of traffic sign. In addition, a methodology was developed to determine the letter size of traffic sign satisfied with the driver's visual acuity of 0.5. This study established scenarios that were composed of visual acuity, reaction time, the number of lane and the letter sizes of traffic sign for each scenario were proposed. Current letter size of traffic sign would not be difficult for drivers with minimum visual acuity of 0.5 to recognize the contents or information of traffic signs. The method developed in this research has an advantage that can consider a human factor like driver's visual acuity for the design of traffic signs. There is also a meaning of making a basis for the letter size of traffic sign.

• Journal of Internet Computing and Services
• /
• v.23 no.1
• /
• pp.49-68
• /
• 2022

The operation system of a shipping company is still maintaining the mainframe based terminal access environment or the client/server based environment. Nowadays shipping companies that try to migrate it into a web-based environment are increasing. However, in the transition, if the design is processed by the old configuration and knowledge without considering the characteristics of the web-based environment and shipping business, various security vulnerabilities will be revealed at the actual system operation stage, and system maintenance costs to fix them will increase significantly. Therefore, in the transition to a web-based environment, a security design must be carried out from the design stage to ensure system safety and to reduce security-related maintenance costs in the future. This paper examines the characteristics of various threat modeling techniques, selects suitable modeling technique for the operation system of a shipping company, applies data flow diagram and STRIDE threat modeling technique to shipping business, derives possible security threats from each component of the data flow diagram in the attacker's point of view, validates the derived threats by mapping them with attack library items, represents the attack tree having various attack scenarios that attackers can attempt to achieve their final goals, organizes into the checklist that has security check items, associated threats and security requirements, and finally presents 23 security requirements that can respond to threats. Unlike the existing general security requirements, the security requirements presented in this paper reflect the characteristics of shipping business because they are derived by analyzing the actual business of a shipping company and applying threat modeling technique. Therefore, I think that the presented security requirements will be of great help in the security design of shipping companies that are trying to proceed with the transition to a web-based environment in the future.

• Journal of Bio-Environment Control
• /
• v.32 no.1
• /
• pp.48-56
• /
• 2023

High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.915-936
• /
• 2017

In this study, current status of Korean hazard mitigation guideline for tunnel operation is summarized. It shows that requirement for CCTV installation has been gradually stricted and needs for tunnel incident detection system in conjunction with the CCTV in tunnels have been highly increased. Despite of this, it is noticed that mathematical algorithm based incident detection system, which are commonly applied in current tunnel operation, show very low detectable rates by less than 50%. The putative major reasons seem to be (1) very weak intensity of illumination (2) dust in tunnel (3) low installation height of CCTV to about 3.5 m, etc. Therefore, an attempt in this study is made to develop an deep-learning based tunnel incident detection system, which is relatively insensitive to very poor visibility conditions. Its theoretical background is given and validating investigation are undertaken focused on the moving vehicles and person out of vehicle in tunnel, which are the official major objects to be detected. Two scenarios are set up: (1) training and prediction in the same tunnel (2) training in a tunnel and prediction in the other tunnel. From the both cases, targeted object detection in prediction mode are achieved to detectable rate to higher than 80% in case of similar time period between training and prediction but it shows a bit low detectable rate to 40% when the prediction times are far from the training time without further training taking place. However, it is believed that the AI based system would be enhanced in its predictability automatically as further training are followed with accumulated CCTV BigData without any revision or calibration of the incident detection system.