• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5365-5380
• /
• 2016

Estimation of signal-to-noise ratio (SNR) is an important problem in wireless communication systems. It has been studied for various constellation types and channels using different estimation techniques. Maximum likelihood estimation is a technique which provides efficient and in most cases unbiased estimators. In this paper, we have applied maximum likelihood estimation for systems employing square or cross QAM signals which are undergoing slow flat Rayleigh fading. The problem has been considered under various scenarios like data-aided (DA), non-data-aided (NDA) and partially data-aided (PDA) and the performance of each type of estimator has been evaluated and compared. It has been observed that the performance of DA estimator is best due to usage of pilot symbols, with the drawback of greater bandwidth consumption. However, this can be catered for by using partially data-aided estimators whose performance is better than NDA systems with some extra bandwidth requirement.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.2
• /
• pp.91-103
• /
• 2003

Use case modeling on UML (Unified Modeling Language) is getting widely used in OOAD and CBD and it is considered a useful technique in dealing with the complexity of the requirements analysis. However, some of the problems with use case modeling are that it is not structured, difficult to handle non-functional requirements, and to analyze impacts among use cases. To alleviate these problems, we propose a scenario-based goal-oriented approach for use case modeling. The proposed approach is to apply a goal-oriented analysis method to use case modeling. Since goal-oriented analysis method is not systematic and many heuristics are involved, we have adopted scenarios as the basis for goal extraction. The proposed method is applied to CBIS (City Bus Information Subsystem) in ITS (Intelligent Transportation System) domain. The proposed approach helps software engineers to analyze the impact among use cases and represent non-functional requirements.

• Spatial Information Research
• /
• v.10 no.4
• /
• pp.515-532
• /
• 2002

Planning Support System (PSS), an alternative framework of computer-aided planning system combining geographic information system (GIS), urban models, and visualization tools, has been actively researched and applied in many developed countries. This paper introduces a PSS-based land use change model, What if\ulcorner PSS, by applying it to Chongju City, Korea. This model application study used the spatial database, Restricted Development Zone (RDZ), and other hypothetical land supply- and demand-related policies of Chongju City. The collaborative PSS model supported land use planning process by helping users to speedily and easily create and test policy-oriented scenarios. The study found that the fully operational PSS model was readily applicable and useful to Korean local land use planning. The paper discusses the conceptual model framework, data requirement, application process, model output, and practical usage. This study would be considered as a prototypical approach of PSS-based land use plan making for Korean cities.

• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.95-101
• /
• 2014

Nonpoint pollution sources from agricultural activities are a major cause of water quality impairment. A nutrient management program utilizes farm practices that maintain efficient crop production systems and control agricultural nonpoint pollution sources. The objectives of present study were to identify appropriate best management practices (BMPs) according to changes of cropping system of main upland crop for reducing AGNPs loadings and to simulate the effects of the application of the several BMPs scenarios in Saemangeum watershed. The selected BMP scenarios were: 1) to convert naked barley and hulled barley to hairy vetch or chinese milk vetch, 2) to convert red pepper to soybean crop, and 3) to combine two scenarios, converting naked barley and hulled barley to hairy vetch or chinese milk vetch + converting red pepper to soybean crop. As a result of BMPs application, the crop requirement of nitrogen and phosphorus for upland crop reduced nitrogen by 41% and phosphorus by 47% in scenario 1, whereas scenario 2 reduced nitrogen by 30% and phosphorus by 23%. Overall, scenario 3 reduced nitrogen by 72% and phosphorus by 70% in agricultural non-point pollution sources associated with chemical fertilizer and livestock manure in Saemangeum watershed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.4
• /
• pp.601-609
• /
• 2022

Jack-up drilling rigs are mobile offshore platforms widely used in the offshore oil and gas exploration industry. These are independent, three-legged, self-elevating units with a cantilevered drilling facility for drilling and production. A typical jack-up rig includes a triangular hull, a tower derrick, a cantilever, a jackcase, living quarters and legs which comprise three-chord, open-truss, X-braced structure with a spudcan. Generally, jack-up rigs can only operate in water depths ranging from 130m to 170m. Recently, there has been an increasing demand for jack-up rigs for operating at deeper water levels and harsher environmental conditions such as waves, currents and wind loads. All static and dynamic loads are supported through legs in the jack-up mode. The most important issue by society is to secure the safety of the leg structure against collision that causes large instantaneous impact energy. In this study, nonlinear FE -analysis and verification of the requirement against collision for 35MJ recommended by DNV was performed using LS-Dyna software. The colliding ship used a 7,500ton of shore supply vessel, and five scenarios of collisions were selected. From the results, all conditions do not satisfy the class requirement of 35MJ. The loading conditions associated with chord collision are reasonable collision energy of 15M and brace collisions are 6MJ. Therefore, it can be confirmed that the identical collision criteria by DNV need to be modified based on collision scenarios and colliding members.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.68-76
• /
• 2006

A thermal time-based two-step phenological model was used to project flowering dates of Japanese cherry in South Korea from 1941 to 2100. The model consists of two sequential periods: the rest period described by chilling requirement and the forcing period described by heating requirement. Daily maximum and minimum temperature are used to calculate daily chill units until a pre-determined chilling requirement for rest release is met. After the projected rest release date, daily heat units (growing degree days) are accumulated until a pre-determined heating requirement for flowering is achieved. Model calculations using daily temperature data at 18 synoptic stations during 1955-2004 were compared with the observed blooming dates and resulted in 3.9 days mean absolute error, 5.1 days root mean squared error, and a correlation coefficient of 0.86. Considering that the phonology observation has never been fully standardized in Korea, this result seems reasonable. Gridded data sets of daily maximum and minimum temperature with a 270 m grid spacing were prepared for the climatological years 1941-1970 and 1971-2000 from observations at 56 synoptic stations by using a spatial interpolation scheme for correcting urban heat island effect as well as elevation effect. A 25km-resolution temperature data set covering the Korean Peninsula, prepared by the Meteorological Research Institute of Korea Meteorological Administration under the condition of Inter-governmental Panel on Climate Change-Special Report on Emission Scenarios A2, was converted to 270 m gridded data for the climatological years 2011-2040, 2041-2070 and 2071-2100. The model was run by the gridded daily maximum and minimum temperature data sets, each representing a climatological normal year for 1941-1970, 1971-2000, 2011-2040, 2041-2070, and 2071-2100. According to the model calculation, the spatially averaged flowering date for the 1971-2000 normal is shorter than that for 1941-1970 by 5.2 days. Compared with the current normal (1971-2000), flowering of Japanese cherry is expected to be earlier by 9, 21, and 29 days in the future normal years 2011-2040, 2041-2070, and 2071-2100, respectively. Southern coastal areas might experience springs with incomplete or even no Japanese cherry flowering caused by insufficient chilling for breaking bud dormancy.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2051-2066
• /
• 2017

This paper deals with reconfigurable secured mobile systems where the reconfigurability has the potential of providing a required adaptability to change the system requirements. The reconfiguration scenario is presented as a run-time automatic operation which allows security mechanisms and the addition-removal-update of software tasks. In particular, there is a definite requirement for filtering and intrusion detection mechanisms that will use fewer resources and also that will improve the security on the secured mobile devices. Filtering methods are used to control incoming traffic and messages, whereas, detection methods are used to detect malware events. Nevertheless, when different reconfiguration scenarios are applied at run-time, new security threats will be emerged against those systems which need to support multiple security objectives: Confidentiality, integrity and availability. We propose in this paper a new approach that efficiently detects threats after reconfigurable scenarios and which is based on filtering and intrusion detection methods. The paper's contribution is applied to Android where the evaluation results demonstrate the effectiveness of the proposed middleware in order to detect the malicious events on reconfigurable secured mobile systems and the feasibility of running and executing such a system with the proposed solutions.

• Geomechanics and Engineering
• /
• v.14 no.5
• /
• pp.467-477
• /
• 2018

Estimation of hydraulic parameters is a critical step during design of foundation dewatering works. When many piles are installed in an aquifer, estimation of the hydraulic conductivity should consider the blocking of groundwater seepage by the piles. Based on field observations during a dewatering project in Shanghai, hydraulic conductivities are back-calculated using a numerical model considering the actual position of each pile. However, it is difficult to apply the aforementioned model directly in field due to requirement to input each pile geometry into the model. To develop a simple numerical model and find the optimal hydraulic conductivity, three scenarios are examined, in which the soil mass containing the piles is considered to be a uniform porous media. In these three scenarios, different sub-regions with different hydraulic conductivities, based on either automatic inverted calculation, or on effective medium theory (EMT), are established. The results indicate that the error, in the case which determines the hydraulic conductivity based on EMT, is less than that determined in the automatic inversion case. With the application of EMT, only the hydraulic conductivity of the soil outside the pit should be inverted. The soil inside the pit with its piles is divided into sub-regions with different hydraulic conductivities, and the hydraulic conductivity is calculated according to the volume ratio of the piles. Thus, the use of EMT in numerical modelling makes it easier to consider the effect of piles installed in an aquifer.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.61-67
• /
• 2018

This study covers the results obtained after three years of development work of real - time gas safety monitoring app. In order to reduce the risk of accidents in the gas workplace, it is essential to provide information so that operators can recognize the location of dangerous substances, dangerous facilities, safety procedures, and the temperature and humidity of the workplace. Therefore, this study was conducted to develop a monitoring app that allows the main system to efficiently receive the information in the field where the information is continuously updated. As a result of quantitative and qualitative research and analysis on app scenarios based on the research done in the past and web screen of the main system, it was modified and improved in terms of ease of use, readability, and intuitiveness. Especially, we made many improvements at low depth, which is a sub-area of ease of use. As a result of conducting a user satisfaction survey on the finally derived app scenarios, the average score of 98.5 was obtained in terms of functionality, convenience and readability.

• Journal of KIISE
• /
• v.43 no.9
• /
• pp.1015-1025
• /
• 2016

Currently, software testing is becoming increasingly important in the industrial field and a large body of research supports the improvement of efficient software testing. Model-based testing is generally used to formalize user requirement data for test design. Complex system that includes loop and concurrency has a high probability of path explosion problem. Specially, as threads are added to concurrency, test scenarios have also increased exponentially. However, it is difficult to solve this problem using existing techniques. In this paper, we propose novel path-search technique that focuses on behavioral features of concurrency path in order to avoid path explosion problem. A system that contains concurrent paths is represented by activity diagram in case study section. Efficiency of our study is shown through comparison with several generated test scenarios of other studies. The result indicate that our approach is efficient for finding faults in loop and concurrency with fewer test scenario.