• KIEAE Journal
• /
• v.9 no.4
• /
• pp.17-22
• /
• 2009

It is common to design the duct branches where to supply the required air flow for individual room in residential apartment house. However it is difficult to adjust the air volume adequately in small air duct branches in residential ventilation system. The purpose of this study is to figure out the performance of Multidrop chamber coupling system for the residential ventilation system. The experiments were designed to simulate apartment of $84m^2$ and established multidrop chamber duct and general duct on the ceiling of the apartment. Distribution performance of air supply rate were evaluated in this experiments. As a result, distribution performance of air supply rate in the general duct is different from designed air supply rate by about 35% ~ 50% and about 10% in the multidrop chamber system. In additional the sound insulation performance of the multidrop chamber system decreased about 20% compared with general duct system. Therefore, the multidrop chamber system is considered to satisfy proper air supply rate of each room and to improve the sound insulation performance in apartment Houses.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.305-315
• /
• 2018

In this study, the ventilation characteristics and the relationships between the required ventilation flow rate and the ventilation system flow rate was investigated by numerical method for the optimum design of the transverse ventilation and semi-transverse ventilation system in road tunnels. The following results were obtained. In supply exhaust transverse ventilation system, the system supply-exhaust air flow rate is theoretically equal to the difference between the required ventilation flow rate and natural ventilation flow rate. However, it is shown that it increases by about 10% in the analysis results. And, in the case of the longitudinal air flow rate is increased by installed jet fans, ventilation system air flow rate is reduced. However, as the longitudinal air flow rate increases, the concentration of pollutants in the tunnel decreases, so the exhaust effect of pollutants decreases, and the effect of reducing the system air flow rate is decreased. In case of semi-transverse with only air supply, ventilation system air flow rate is equal to required ventilation air flow rate when tunnel inlet velocity is negative, but results is shown it is increased within about 13.3%. Also, it was found that ventilation effect can not be expected even if the jet fans are increased when the tunnel inlet velocity is negative.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1318-1321
• /
• 2005

As recently raw water quality has been polluted as well as its quality has been remarkably varied according to season and region, the precise control of coagulant dosage is being keenly required in water treatment plants. The amount of coagulant is closely related to raw water quality such as turbidity, alkalinity, water temperature, pH, electrical conductivity, etc. Since the optimum quantity of chemicals is not yet finalized, so dosage rate must be decided by using jar test that takes one or two hours. Hereupon, the output signal of stream current and multi-regression on historical data were proposed to be applied to the coagulant dosing control. In consequence of applying the scheme to automatic determination of the dosage rate, it was testified that the determination of dosage rate was very effective in case it is performed as to real-time sensing of water quality and the output signal of stream current.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.245-253
• /
• 2020

If the conversion rate of jeonse price to monthly rent is the market interest rate or the landlord's expected return, then the conversion rate of jeonse price to monthly rent in the country should be the same. However, the conversion rate of jeonse price to monthly rent has always been higher than the market interest rate. This study identifies the supply cost components of rental housing as a risk premium in the presence of current housing prices, market interest rates, depreciation costs, holding taxes, and leases, and identifies the relationship between the current housing prices and each factor. Housing rent is expressed as the current price. This overcomes the shortcomings that implicitly assume fluctuations in housing prices or do not include current housing prices in the conversion rate of jeonse price to monthly rent. This study found that the conversion rate of jeonse price to monthly rent is the required rate of return or required rate of renter, not market interest rate, by expressing the supply cost of rental housing as a combination of components. This not only explained the fact that the conversion rate of jeonse price to monthly rent was always higher than the market interest rate, but also explained the regional differences. It also explained why the conversion rate of jeonse price to monthly rent varies by type of housing.

• Water for future
• /
• v.29 no.4
• /
• pp.223-231
• /
• 1996

For the most efficient operation of water mains, 124 head losses in domestic water supply steel mains were measured to provide the values of friction coefficient and the variable affecting the deterioration rate of Hazen Williams' and Darcy-Weisbach's friction coefficient. The experimental results show that pipe age is governing the friction coefficient of large mains (Diameter > 1100 mm). On the other hands, pipe age and pipe diameter are affecting the variation of carrying capacity for small mains (Diameter < 1100 mm). The friction coefficient of water mains in foreign countries is higher than that in Korea by about 5 to 10 in Hazen Williams' C value. The growing rate of roughness height of domestic water main is about 0.41 mm/year which is higher than the average of United States of America. So further study is required to find out what causes the serious deterioration rate.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.74-83
• /
• 2011

For launcher applications, different from other applications, very high flow rate is required which can lead to supply pressure drop against required setting pressure. The supply pressure decrease is closely related to regulator characteristics. In this paper, supply pressure offset is investigated considering regulators as kinds of control systems. Pressure offset of self-operated regulator is analyzed with sensitive parameter defined as the ratio of valve travel to pressure offset. It is shown that pressure offset of self-operating regulator can be improved by incorporating proportional and integral controls and they can be materialized with pilot regulator systems.

• Journal of the Korean housing association
• /
• v.13 no.2
• /
• pp.15-22
• /
• 2002

This paper aims to analyze the changes in the living arrangements of the elderly in Chejoo-do for the elderly housing supply by using census data. The conclusions are as follows; The rate of living alone and living with spouse only of the elderly have been increasing. The trend in county was higher than that in city. Living alone rate of the elderly of Chejoo-do was higher than that of Korean average. Even in the oldest old, living alone rate has been increasing in Chejoo-do. It is a unique phenomenon in Korea and similar with U.S. In Chejoo-do, it is strongly required to evolve elderly housing by universal design for living alone elderly in county as well as for living alone elderly in city.

• Journal of ILASS-Korea
• /
• v.9 no.2
• /
• pp.18-23
• /
• 2004

An experimental studies of conventional gasoline fuel pump were carried out to obtain fundamental data fur liquid phase LPG injection(LPLi) system. A regenerative type and a roller-vane type of pumps were investigated in various operational condition. The experiments were performed to obtain flow rate of LPG fuel as a function of pressure differences and temperatures. The regenerative pump had too low flow rate at some experimental conditions to use this pump system for LPLi fuel supply system. On the other hand, the roller-vane type pump can be applied to the system only if its check valve is modified. Cavitation might occur in this system which can result in system noise, flow rate variation, and pump durability problem. To solve these problems the system is needed to increase $NPSH_{re}$(required net positive suction head).

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2001.11a
• /
• pp.119-127
• /
• 2001

This paper aims to analyse the changes In the living arrangements of the elderly in Chejoo-do for the elderly housing supply by using census data. The conclusions are as follows; The rate of living alone and living with spouse only of the elderly have been increasing. The trend in county was higher than that in city. Living alone rate of the elderly of Chejoo-do was higher than that of Korean average. Even in the oldest old, living alone rate has been increasing in Chejoo-do. It is a unique phenomenon in Korea and similar with U.S. In Chejoo-do, it is strongly required to evolve elderly housing by universal design for living alone elderly in county as well as for living alone elderly in city.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.2
• /
• pp.82-90
• /
• 2003

The work presented here is a design and an implementation of PID control system to regulate a supply duct outlet air temperature in PEM (Personal Environment Module). In PEM, the air is heated to the required temperature while it flows through the supply duct without any mixing chamber. This makes the control of air temperature in PEM difficult. A simulation is done first to understand the relationship between a temperature distribution in working area, flow rate and the outlet air temperature of PEM. Then a linear dynamic model of heating process in PEM is derived. P, PD and PID type control systems, to provide the rapid response without overshoot and saturation in heater command voltage, are designed using a linear model obtained. Experimentally obtained data shows that the control system satisfies the design criteria and works properly in controlling the supply duct outlet air temperature.