• Geomechanics and Engineering
• /
• v.29 no.3
• /
• pp.301-310
• /
• 2022

Accurate prediction of mixed ground conditions ahead of a tunnel face is of vital importance for safe excavation using tunnel boring machines (TBMs). Previous studies have primarily focused on electrical resistivity surveys from the ground surface for geotechnical investigation. In this study, an FE (finite element) numerical model was developed to simulate electrical resistivity surveys for the prediction of risky mixed ground conditions in front of a tunnel face. The proposed FE model is validated by comparing with the apparent electrical resistivity values obtained from the analytical solution corresponding to a vertical fault on the ground surface (i.e., a simplified model). A series of parametric studies was performed with the FE model to analyze the effect of geological and sensor geometric conditions on the electrical resistivity survey. The parametric study revealed that the interface slope between two different ground formations affects the electrical resistivity measurements during TBM excavation. In addition, a large difference in electrical resistivity between two different ground formations represented the dramatic effect of the mixed ground conditions on the electrical resistivity values. The parametric studies of the electrode array showed that the proper selection of the electrode spacing and the location of the electrode array on the tunnel face of TBM is very important. Thus, it is concluded that the developed FE numerical model can successfully predict the presence of a mixed ground zone, which enables optimal management of potential risks.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.1
• /
• pp.3-14
• /
• 1982

In this paper, the sway added mass of a rectangular cylinder in a restricted water is considered by applying Hamilton's principle as the frequency tends to zero. The present method is an extension of Isshiki's method proposed in 1978. In the present method, it is assumed that the fluid velocity distribution in each subdomain of the fluid can be represented by higher order polynomials while Isshiki assumed linear velocity distribution. The fluid flow is assumed as a rotational motion in the present analysis. However, the results obtained from the present method show good agreement with Bai's numerical results for the case of large clearances between a canal wall and a cylinder. From Kelvin's minimum energy theorem, we can see that the value of sway added mass obtained from the present method approaches the upper bound. The approximate formula obtained in the present study takes a simple form which consists of the dimensions of the canal and the cylinder. The present formulae are derived for the cases of a rectangular cylinder swaying at the center of a narrow or wide canal relative to a cylinder, at off-center location in a canal, and in the restricted water with a single wall. From the results of numerical calculation, it is concluded that the sway added mass in restricted waters is more affected by water depth than clearance between a wall and a cylinder.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.47-49
• /
• 2022

IPS is an indoor positioning system that replaces GPS, which is less accurate due to walls and roofs inside buildings. Radio signals such as Wi-Fi are used instead of satellite signals, and complex methods are being used to increase accuracy. In this paper, we present a more efficient positioning method than before by applying high-level signals to high-accuracy fingerprint techniques. A radio map is configured with high-level signals collected by utilizing Wi-Fi APs, which are more than in the past. The suitability of use was confirmed by analyzing the pattern represented by the configured radio map for each location.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.6
• /
• pp.364-379
• /
• 2022

Coastal communities have been vulnerable to extreme coastal flooding induced by hurricanes and tsunamis. Many studies solely focused on the overland flow hydrodynamic and loading mechanisms on individual inland structures or buildings. Only a few studies have investigated the effects of flooding mitigation measures to protect the coastal communities represented through a complex series of building arrays. This study numerically examined the performance of flood-mitigation measures from tsunami-like wave-induced overland flows. A computational fluid dynamic model was utilized to investigate the performance of mitigation structures such as submerged breakwaters and seawalls in reducing resultant forces on a series of building arrays. This study considered the effects of incident wave heights and four geometrically structural factors: the freeboard, crest width of submerged breakwaters, and the height and location of seawalls. The results showed that prevention structures reduced inundation flow depths, velocities, and maximum forces in the inland environment. The results also indicated that increasing the seawall height or reducing the freeboard of a submerged breakwater significantly reduces the maximum horizontal forces, especially in the first row of buildings. However, installing a low-lying seawall closer to the building rows amplifies the maximum forces compared to the original seawall at the shoreline.

• The Plant Pathology Journal
• /
• v.39 no.4
• /
• pp.319-334
• /
• 2023

Plant disease is an important factor affecting crop yield. With various types and complex conditions, plant diseases cause serious economic losses, as well as modern agriculture constraints. Hence, rapid, accurate, and early identification of crop diseases is of great significance. Recent developments in deep learning, especially convolutional neural network (CNN), have shown impressive performance in plant disease classification. However, most of the existing datasets for plant disease classification are a single background environment rather than a real field environment. In addition, the classification can only obtain the category of a single disease and fail to obtain the location of multiple different diseases, which limits the practical application. Therefore, the object detection method based on CNN can overcome these shortcomings and has broad application prospects. In this study, an annotated apple leaf disease dataset in a real field environment was first constructed to compensate for the lack of existing datasets. Moreover, the Faster R-CNN and YOLOv3 architectures were trained to detect apple leaf diseases in our dataset. Finally, comparative experiments were conducted and a variety of evaluation indicators were analyzed. The experimental results demonstrate that deep learning algorithms represented by YOLOv3 and Faster R-CNN are feasible for plant disease detection and have their own strong points and weaknesses.

• Journal of Korea Water Resources Association
• /
• v.44 no.4
• /
• pp.295-304
• /
• 2011

For effective water quality management, it is necessary to secure reliable water quality information. There are many variables that need to be included in a comprehensive practical monitoring network : representative sampling locations, suitable sampling frequencies, water quality variable selection, and budgetary and logistical constraints are examples, especially sampling location is considered to be the most important issues. Until now, monitoring network design for water quality management was set according to the qualitative judgments, which is a problem of representativeness. In this paper, we propose network design system for optimal water quality monitoring using the scientific statistical techniques. Network design system is made based on the SAS program of version 9.2 and configured with simple input system and user friendly outputs considering the convenience of users. It applies to Excel data format for ease to use and all data of sampling location is distinguished to sheet base. In this system, time plots, dendrogram, and scatter plots are shown as follows: Time plots of water quality variables are graphed for identifying variables to classify sampling locations significantly. Similarities of sampling locations are calculated using euclidean distances of principal component variables and dimension coordinate of multidimensional scaling method are calculated and dendrogram by clustering analysis is represented and used for users to choose an appropriate number of clusters. Scatter plots of principle component variables are shown for clustering information with sampling locations and representative location.

• Spatial Information Research
• /
• v.16 no.4
• /
• pp.489-497
• /
• 2008

Currently, GIS has been widely used in the hedonic analyses of urban apartment housing markets in Korea. In those analyses, the apartment complexes are typically represented as the points or the polygons on the GIS maps and the location variables of the analyses are measured based on the points or the polygons. In this study, the relative performance of the point based approach and the polygon based approach in a GIS based hedonic analysis was compared using the apartment housing market data from the north eastern part of the city of Seoul and Davidson and MacKinnon Test. The results from this study indicate two things. First, two approaches can produce substantially different results in a hedonic price model estimation. Second, the polygon based approach produces a hedonic price model which explains the price variations better than the point based approach. These findings suggest that Korean researchers who are interested in improving quality of hedonic price model estimations and use GIS to measure the location variables for hedonic price models should consider using the polygon based approach with the point based approach. This is because the polygon based approach can produce the location variables with the shortest straight line distances and can explain the housing price variations well.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.471-478
• /
• 2003

Traditionally,, analysis, simulation and measurement have all been used to evaluate the performance of network protocols and functional entities that support mobile wireless service. Simulation methods are useful for testing the complex systems which have the very complicate interactions between components. To develop a mobile call simulator which is used to examine, validate, and predict the performance of mobile wireless call procedures must have the teletraffic model, which is to describe the mobile communication environments. Mobile teletraffic model is consists of 2 sub-models, traffic source and network traffic model. In this paper, we analyzed the network traffic data which are gathered from selected Base Stations (BSs) to define the mobile teletraffic model. We defined 4 types of cell location-Residential, Commercial, Industrial, and Afforest zone. We selected some Base Stations (BSs) which are represented cell location types in Seoul city, and gathered real data from them And then, we present the call rate per hour, cail distribution pattern per day, busy hours, loose hours, the maximum number of call, and the minimum number of calls based on defined cell location types. Those parameters are very important to test the mobile communication system´s performance and reliability and are very useful for defining the mobile network traffic model or for working the existed mobile simulation programs as input parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.491-497
• /
• 2006

The goal of this research is to explore the opinions of the resident's neighboring within sewage disposal plants, to investigate the differences in accordance with each location of sewage disposal plants, and to examine the determinants to impact on the sewage disposal plants. The multivariate analysis of variance model and regression model are employed as the empirical analysis for this research. The major findings are as follows; as a rule, most of residents represented the sewage disposal plants are essential public facilities. The sewage disposal plants could be positively considered under proper compensation and negotiation, It is found that the satisfaction level against accomplishing process of the sewage disposal plants facilities are very low. In addition, it was revealed that the determinants to impact on the sewage disposal plants showed differently according to each current location of sewage disposal plants. It means that there are no absolutely concrete reasons to oppose the sewage disposal plants and they can be somewhat different by the each local characteristics. Therefore, these findings provide for the policy makers related with the NIMBY facilities including the sewage disposal plants with valuable information.

• Journal of KIISE:Software and Applications
• /
• v.29 no.1_2
• /
• pp.42-52
• /
• 2002

Information extraction(IE) is a process of recognizing and fetching particular information fragments from a document. In previous work, most IE systems generate the extraction rules called the wrappers manually, and although this manual wrapper generation may achieve more correct extraction, it reveals some problems in flexibility, extensibility, and efficiency. Some other researches that employ automatic ways of generating wrappers are also experiencing difficulties in acquiring and representing useful domain knowledge and in coping with the structural heterogeneity among different information sources, and as a result, the real-world information sources with complex document structures could not be correctly analyzed. In order to resolve these problems, this paper presents an agent-based information extraction system named XTROS that exploits the domain knowledge to learn from documents in a semi-structured information source. This system generates a wrapper for each information source automatically and performs information extraction and information integration by applying this wrapper to the corresponding source. In XTROS, both the domain knowledge and the wrapper are represented as XML-type documents. The wrapper generation algorithm first recognizes the meaning of each logical line of a sample document by using the domain knowledge, and then finds the most frequent pattern from the sequence of semantic representations of the logical lines. Eventually, the location and the structure of this pattern represented by an XML document becomes the wrapper. By testing XTROS on several real-estate information sites, we claim that it creates the correct wrappers for most Web sources and consequently facilitates effective information extraction and integration for heterogeneous and complex information sources.