• Journal of Welding and Joining
• /
• v.24 no.6
• /
• pp.21-27
• /
• 2006

This study was focused on the evaluation of the thermo-mechanical board-level reliability of Pb-bearing and Pb-free surface mount assemblies. The composition of Pb-bearing solder was a typical Sn-37Pb and that of Pb-free solder used in this study was a representative Sn-3.0Ag-0.5Cu in mass %. Thermal shock test was chosen for the reliability evaluation of the solder joints. Typical $Cu_6Sn_5$ intermetallic compound (IMC) layer was formed between both solders and Cu lead frame at the as-reflowed state, while a layer of $Cu_3Sn$ was additionally formed between the $Cu_6Sn_5$ and Cu lead frame during the thermal shock testing. Thickness of the IMC layers increased with increasing thermal shock cycles, and this is very similar result with that of isothermal aging study of solder joints. Shear test of the multi layer ceramic capacitor(MLCC) joints was also performed to investigate the degradation of mechanical bonding strength of solder joints during the thermal shock testing. Failure mode of the joints after shear testing revealed that the degradation was mainly due to the excessive growth of the IMC layers during the thermal shock testing.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.709-713
• /
• 2005

A new algorithm is proposed for the extraction of line segments to construct 3D wire-frame models of building from the high-resolution aerial images. The purpose of this study Is the accurate and effective extraction of line segments, considering the problems such as discordance of lines and blurred edges existing in the conventional methods. Using the edge map extracted from aerial images, chain code tracking of edges was performed. Then, we extract the line segments considering the strength of edges and the direction of them. SUSAN (Smallest Uni-value Segment Assimilating Nucleus) algorithm proposed by Smith was used to extract an edge map. The proposed algorithm consists of 4 steps: removal of the horizontal, vertical and diagonal components of edges to reduce non-candidate point of line segments based on the chain code tracking of the edge map, removal of contiguous points, removal of the same angle points, and the extraction of the start and end points to be line segments. By comparing the proposed algorithm with Boldt algorithm, better results were obtained regarding the extraction of the representative line segments of buildings, having relatively less extraction of unnecessary line segments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.47-55
• /
• 2003

This paper proposes a composition method of mosaic image from the compressed MPEG-2 video stream, in which the displacement between successive frames according to the camera operation is estimated directly from the information involved in the stream. In the proposed method. the approximated optical flow is constructed from motion vectors of macro blocks, and it is used to determine the parameters of the displacements according to the camera operation associated with pan and tilt. The extracted parameters are used to determine the geometric transform of successive video frames in order to construct a mosaic image. The construction of mosaic uses several blending techniques including the one proposed by Nichols in which an analytic weight is used to determine pixel values. Through the experiment, the blending technique based on analytic weights was superior to the others such as averaging and median-based techniques. It provided more smooth changes in background and made use of instantaneous frame information to construct a mosaic. The mosaic in the paper puts the emphasis on the reduction of computation because it is constructed from the motion vectors included in the compressed video without decoding and recalculating exact optical flows. The constructed mosaic can be used in the retrieval of the compressed video as the representative frame of a shot.

• KIEAE Journal
• /
• v.7 no.1
• /
• pp.5-13
• /
• 2007

Since aging has become one of most hot and serious issues in the whole global world, universal design as a strategic concept to enable the elderly age in place has received much attention and its importance is getting recognized. Japan has undergone the Aging phenomenon much earlier than Korea and other countries. During that time, through much trials and errors, it accumulated the wisdoms and techniques to precede aging friendly environment and products. Therefore current Japan house is a comprehensive setting which embraces lots of universal design features that has a valuable implication for Korean development that faces fast aging future. The purpose of this study was to delineate characteristics of universal design features appeared in Japanese Model houses. One site of housing park in the city where various model houses of representative housing construction companies was selected as a cluster area for data collecting. Data were collected mainly through field survey at the housing park of Tokyo during November, 2006, and additional data were collected through website and company information of relevant company. Universal design features were extracted for 17 houses of the housing park and sorted and analyzed according to the analysis frame. The frame were made using 2 major clusters; space area, and 8 universal design principle. Results showed a range of universal design feature and its detail universal design principle satisfied. The 8 principle currently developed became to house realistic practical examples and theory became proved its impractical power. The academic, educational and industrial implication were documented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.142-155
• /
• 2000

In this paper, we propose an efficient policing mechanism for Markov model-based traffic descriptors of VBR MPEG video traffic. A VBR video sequence is described by a set of traffic descriptors using a scene-basedMarkov model to the network for the effective resource allocation and accurate QoS prediction. The networkmonitors the input traffic from the source using a proposed new policing method. for policing the steady statetransition probability of scene states, we define two representative monitoring parameters (mean holding andrecurrence time) for each state. For frame level cell rate policing of each scene state, accumulated average cellrates for the frame types are compared with the model parameters. We propose an exponential bounding functionto accommodate dynanic behaviors during the transient period. Our simulation results show that the proposedpolicing mechanism for Markovian traffic descriptors monitors the sophisticated traffic such as MPEG videoeffectively and well protects network resources from the nalicious or misbehaved traffic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2079-2084
• /
• 2016

When designing the interface of the web site, we must consider what users want and need in the design, because design trends are recently changing from user interface design to user experience design. In this paper, we present the method to apply the user experience design when designing the main page of the web site. We select representative online markets and analyze the information elements which compose the main page. Using the eye tracking method which measure user's visual attention frequency, we compare the main page with the wire-frame and analyze changes of the visual attention frequency over time. As a result of experiments, it is efficient to allocate the important information as the image or the moving image to the center of main page for use's visual attention at the time of designing the main page of the online market.

• Research in Plant Disease
• /
• v.25 no.1
• /
• pp.1-7
• /
• 2019

The rice blast fungus, Magnaporthe oryzae, is one of the most economically important crop diseases. In addition, rice-M. oryzae interaction is a classical gene-for-gene host-pathogen system. Race variation in pathogen groups was proposed as the main mechanism for rapid break-down of resistance in newly introduced rice cultivars. These new pathogen race variations may be caused by changes in an avirulence gene, such as (i) point mutations, (ii) insertion of transposons, and (iii) frame shifts. The avirulence gene AVR-Pita1 is representative avirulence gene in which all of these mutations are reported. In this review, we present a useful information for avirulence gene AVR-Pita1 and its homologous genes AVR-Pita2 and AVR-Pita3. We also review examples that cause mutations in these evolutionarily significant genes.

• Wind and Structures
• /
• v.31 no.6
• /
• pp.533-548
• /
• 2020

Despite the current technologic developments, failures in existent tensile fabric structures (TFS) subjected to wind do happen. However, design pressure coefficients are only obtained for large projects. Moreover, studies on TFSs with realistic supporting frames, comparing static and dynamic analyses and discussing the design implications, are lacking. In this study, fluid-Structure analyses of a TFS supported by masts and inclined cables, by subjecting it to different wind speeds, are carried out, to gain more understanding in the above-referred aspects. Wind-induced stresses in the fabric and axial forces in masts and cables are assessed for a hypar by using computational fluid dynamics. Comparisons are carried out versus an equivalent static analysis and also versus loadings deemed representative for design. The procedure includes the so-called form-finding, a finite element formulation for the TFS and the fluid formulation. The selected structure is deemed realistic, since the supporting frame is included and the shape and geometry of the TFS are not uncommon. It is found that by carrying out an equivalent static analysis with the determined pressure coefficients, differences of up to 24% for stresses in the fabric, 5.4% for the compressive force in the masts and 21% for the tensile force in the cables are found with respect to results of the dynamic analysis. If wind loads commonly considered for design are used, significant differences are also found, specially for the reactions at the supporting frame. The results in this study can be used as an aid by designers and researchers.

• Analyses & Alternatives
• /
• v.6 no.1
• /
• pp.163-194
• /
• 2022

A transboundary environmental problem refers to an environmental problem that goes beyond a country's territory and damages neighboring countries. It is a difficult problem because, basically, it is a natural, rather than intentional, effect, and it is extremely hard to make a scientific consensus on the cause-effect relations between upstream and downstream nations. Air pollution, especially PM 2.5 and PM 10, is one of the typical cases of transboundary environmental problems in the Northeast Asia. This paper analyzes the constraints of environmental cooperation between China and South Korea to address transboundary air pollution issue. It argues that lack of trust and ideological hostility, rather than, scientific uncertainty, is the biggest obstacle for effective cooperation, and these hostile discourses and ideas are mostly generated by media in the downstream nation, the South Korea. In order to identify how South Korean media frames this issue, this paper searched newspaper articles in the six representative South Korean newspapers during the period of 2014 and 2020, and analyzed about 2,000 articles selected. It finds that South Korean media has framed the transboundary air pollution as a China bashing and related domestic political cleavage issue, while it neglects to show the cooperation attempts that the two countries have made to date. Also, while the media focuses on China hate frame, it has never reported the Chinese government's domestic policies to reduce air pollution and their results. Media's overuse of hate and blame frames not only has disrupted trust building but also it will delay a possible turning point of environmental cooperation between the two countries in the future.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.217-228
• /
• 2021

The purpose of this study is to analyze drum performance techniques, focusing on the representative artists of funk music, who had a revival starting in the 1970s. The purpose of this study is to analyze the creativity shown in David Garibaldi's playing technique, which had a great influence on drum majors with his funk drum playing technique. As a research method, 'James Brown', 'Earth, Wind & Fire' and 'Tower of Power' with David Garibaldi as drummer were selected as representative bands. For the study period, the drum performance was examined by selecting two representative songs from among the songs released between 1965 and 1975, when the development of the corresponding funk music began. David Garibaldi's creative performance in this study is as follows. First, we tried to create a new rhythm in the form of changing the beat or resting the beat out of the frame of contemporary drum performance. Second, the 'Paradiddle', 'Accent', and 'Swiss Army triplet' rudiment techniques were applied to the entire drum kit, bringing innovation to the rhythm. Third, the samba pattern of Latin rhythm and the form of 'Afro-Cuban' were grafted onto funk music. Fourth, the idea of Unison Rhythm obtained from the structure of Latin music was applied to funk music. Based on this study, it is hoped that research on drum performance techniques of various genres will be conducted.