• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.659-664
• /
• 1997

RC structures can deteriorate for many defective factors. In the repair and retrofit works of concrete, epoxy resins are widely used as repair materials. The object of this study is to investigate the material properties and durabilities of epoxy resins which are commonly used in repairing concrete. The material properties such as line-expansion modulus, viscosity, microstructure and physical parameter as well as the durabilities such as gravity change, tensile strength, elongation change were carried out.

• Architectural research
• /
• 제11권2호
• /
• pp.27-34
• /
• 2009

The purpose of this study is to investigate the problem of crack repair materials and methods in existing concrete structure and to propose the effective injection method on crack repair by packer type. The result of this study is as follows. It is investigated that the crack width in the inner matrix of concrete structure is decreased about 30-40% than that in the surface of the concrete structure. Also it is showed that the possibility which could be monolithic with injection part became higher if the injection part is installed near to surface of concrete on the punching method to vertical direction against crack area. The injection of repair material can be poured smoothly under about $10N/mm^2$ pressure on the condition that cracks are monolithic with injection part without dust by drill. The method which is effective injection for a repair material is the punching method in compliance with coredrill. But, the research continuously is necessary about minimum injection pressure.

• 한국건축시공학회지
• /
• 제6권2호
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the problem of crack repair materials and methods in existing concrete structure and to propose the effective injection method on crack repair by packer type. The result of this study is as follows. It is investigated that the crack width in the inner matrix of concrete structure is decreased about 30-40% than that in the sulfate of the concrete structure. Also it is showed that the possibility which could be monolithic with injection part became higher if the injection part if installed near to surface of concrete on the punching method to vertical direction against crack area. The injection of repair material can be poured smoothly under about $10N/mm^2$ pressure on the condition that cracks are monolithic with injection part without dust by drill. The effective method to pour the injection repair material is the punching method by coredrill but several research to minimize injection pressure should be continually.

• 건축역사연구
• /
• 제30권3호
• /
• pp.33-44
• /
• 2021

San-ja is one of the main members consisting of the roof of traditional wooden buildings in Korea. In this study, the regional characteristics of the materials used in San-ja and changes of the materials over time were examined. To this end, 123 documents on the repair of wooden architectural heritage recorded since the 1950s were reviewed. It was found that there was a difference in the San-ja material by region because of the diversity in the conditions of material supply. For instance, bamboo was the most frequently used material in Jeollanam-do province because it was readily available. However, with the development of transportation and vehicle, the regional characteristics have disappeared. As a result, the material has been unified with bamboo now. This is because bamboo is specified as a representative material in the specification or the convenience of construction is prioritized. In addition, the social and economic conditions at the time of repair had an influence on the selection of the San-ja materials.

• 대한토목학회논문집
• /
• 제43권1호
• /
• pp.9-20
• /
• 2023

고속도로 콘크리트 구조물은 제설제 사용량 증가로 구조물의 열화가 가속되고 있어 성능회복을 위해 단면복구공사를 실시하고 있다. 하지만, 보수공사 이후 보수부위에 균열, 들뜸 및 부착성능 저하 등의 재손상이 나타나고 있다. 본 연구에서는 먼저 해외 기준을 분석하였고, 공용 중인 콘크리트 구조물의 현장조사, 실내실험, 폐교량에 대한 시험시공을 통해 균열 방지 및 부착성능향상을 위해 강화된 기준을 제시하였다. 요구성능이 충족되는 재료는 모두 적용이 가능하도록 성능기반의 품질기준을 제시하였고, 재료별 상이한 시험방법도 일관성 있는 시험결과 분석을 위해 콘크리트 시험법으로 통일하여 제시하였다. 고려된 품질기준은 하중 저항을 위해 역학특성 분야로는 압축강도, 휨강도, 부착강도 기준을 마련하였고, 체적안정성을 위해 길이변화율, 균열저항성, 열팽창계수, 탄성계수를 기준을 마련하였다. 제설염해에 대한 저항성을 위해 내구성능 분야로는 염분침투저항성과 동결융해저항성 기준을 제시하였다. 본 연구에 의해 제시된 콘크리트 보수재료의 기준은 국내의 단면복구공사 품질향상에 기여할 것으로 기대된다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.390-395
• /
• 2002

The experimental and numerical study has been conducted on the sleeve repair welding of API 5L X65 pipeline. SMA W and GTAW were applied to weld the sleeve. The macrostructure and hardness of repair welds have been examined. The [mite element analysis of the multi-pass sleeve-fillet welding has been conducted to validate the experiment and investigate the effects of in-service welding conditions. The effect of gas flow rate on the hydrogen cracking was investigated. The effect of internal pressure on residual stresses and plastic strain was investigated. The allowable heat input was predicted considering the maximum temperature of inner surface of pipe and cooling rate at CGHAZ.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.581-586
• /
• 2003

The objective of this study is to evaluate the injection performance of crack repair method in concrete structure. To improve the quality of the concrete structure caulking material was injected into the crack of building that were planned to be demolished and injection properties of various repair method were compared and assessed according to type of crack. Results from the test showed that when cracks and injection port were integrated and the injection port wasn't blocked repair material was able to be injected even below around 40㎏/㎠ pressure. Moreover, effective pressure each type of packer showed wide range varying from 200-400㎏/㎠. As for drill method for injection port, core drill method has shown to be more effective compared to the air pump method

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.349-355
• /
• 2006

The gas turbine components is used on high temperature conditions which under severely circumstance with start-up and stop several times. Therefore, it is used nickel-base superalloys like and GTD-111DS. Damaged buckets on the t긴ade tip during operating are repaired per 24,000 hr to three times according to repair specification of manufacture. It is applied pre-heat, HIP(hot isostatic pressing) and post-heat treatment to support welding repair on blade tip effectively. On this study, It is utilize of $WRAP^{TM}$ (welding repair advanced process) method to make tension test specimens for this study, And then, material strength and characteristic for GTD-111DS was analyzed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.867-870
• /
• 1998

The reinforced concrete structures have been deteriorated for various causes since it serviced for the long time. If we have to service concrete structure long time, we must repair it using appropriate methods and materials. But the data which evaluate the repair material has not been sufficient. So, the aim of this research is to estimate properties of repair materials and to acquire the data which apply to the concrete structures in field. To accomplish this objective, we have made experiment on compressive strength, bond strength, the coefficient of thermal expansion and setting time. Generally, compressive strength and bond strength are favorable but some products are unfavorable under wet curing. Setting time was faster than ordinary portland cement mortar except one material.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.267-270
• /
• 2005

Recently, the damaged concrete structures are often strengthened or repaired using the polymer concrete or the polymer cement mortar. In the repaired concrete structures at early ages, internal stresses could be developed due to the differential drying shrinkage of the repair material. Due to the difference of the thermal coefficients of the repair material and existing concrete, additional stresses also could be developed as the structures are subjected to the ambient temperature changes. Theses environmentally-induced stresses can sometimes be large enough to cause damage to the structures, such as debonding of the interface between the two materials. In this study, a rational procedure was developed where anchors can be designed and installed to prevent damages in such structures by thermally-induced stresses. Finally, through the experimental and numerical study, the effects of the repair method using anchors with debonding was investigated and discussed the results.