• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.31-38
• /
• 2024

In this paper, as there are many cases of fires occurring due to the failure or inoperability of the thermostat of electronic products, the purpose is to test and analyze the risks and probabilities through fire cases and reproduction experiments, and suggest countermeasures. Among electronic products, water purifiers are composed of a refrigerant system with a compressor to make cold water, a heating device to make hot water, and an electric device used as an energy source. Due to the nature of the water purifier manufacturing, these devices are subject to a lot of moisture and dust. etc. exist in large quantities and use electrical energy, so there is a possibility of fire due to short circuit in the wire, electrical abnormal overheating (tracking phenomenon) in the thermostat, electronic board, starting relay, etc., and overheating of the heating device (Band Heater). there is. Therefore, in order to prevent fires from these devices, a system to remove foreign substances inside the water purifier is necessary, the use of heat-resistant (fire-resistant) wires for electrical devices is essential, and the use of non-combustible materials (semi-combustible materials) for each part is necessary to prevent fire. The risk must be eliminated through prevention and combustion expansion prevention devices.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1997년도 제5회 하계 Workshop (97 한,카 국제공동 Workshop, 고도 수처리를 위한 막분리 공정)
• /
• pp.207-231
• /
• 1997

The use household water purifier is continuously increasing due to the distrust of the piped, rap water, which may be caused by the deterioration of water quality and water supply facilities in Korea. The water purifier distributing in the domestic market is the membrane type that composes of membrane as a basic filter, sediment filter as a prefilter and activated carbon filter instead of one purifying water system. The membrane type using as a water cleaning system is mainly the method of micro filtration(NIF) as well as ultra filtration(UF) and reverse osmosis(RO). The types of MF and UF are using to remove suspended solids and virus, and RO is using to remove ionic compound in chemical organic compounds. At the beginning the household water purifier was imported as end-product or assembled by only importing module from small businesses in Korea. Therefore, people was hard to confide in the product quality because the sales policy and management of water purifier by small business were not effectively organized. However, the defects of water purifier having up to now ate improving by the efforts of special branches of water purifier and large enterprises, and new great products are developing and producing. To develop the best quality product of water purifier in Korea, it should be considered seasonal water characteristrics rather than any other condition. For example, the water purifier can be affected by the water temperature change, increase of suspended solids in the rainy season and inflow of raw water having concentration in a dry season. The subject we have to investigate in the future is to develop the water purifying system adaptable in Korea which can treat the water quality using close analyses of local and seasonal water characteristics.

• Journal of Applied Biological Chemistry
• /
• 제50권1호
• /
• pp.6-12
• /
• 2007

Feasibility of laboratory-synthesized zerovalent iron was investigated to remove arsenic from leachates of tailings taken from an Au-Ag abandoned mine. The tailings were seriously contaminated with arsenic, and its potential adverse effect on the ecosystems around the mine seems to be significantly high. Long-term column experiments were conducted for about 3.5 months to evaluate the effectiveness of the synthesized zerovalent iron for removal of arsenic. Over than 95% removal efficiency of As was observed in the zerovalent iron mediated tests. In addition, the XRD data suggest that the corrosion products of ZVI were identified magnetite, maghemite, goethite, and lepidocrocite, all of which support Fe(II) oxidation as an intermediate step in the zerovalent iron corrosion process. The results indicate that arsenic can be removed from the tailing-leachate by the mechanism of coprecipitation and/or adsorption onto those iron oxides formed from ZVI corrosion.

• 한국조리학회지
• /
• 제11권4호
• /
• pp.228-244
• /
• 2005

The objective of the study is to observe cooks first from the kitchen and those who care health and to grasp the impression regarding the kitchen environment. Also, it grasped the recognition degree of cooks against the elements of kitchen ventilation and kitchen ventilation equipments. We surveyed against 385 cooks who work in the kitchen of special grade hotels and family restaurants, used 5 scales for the object, and executed the analysis. The results of this study are as follows: (1) Health condition of the cooks appeared most highly pain in the shoulder and the neck. (2) for the impression regarding the kitchen environment, temperature was high and the insufficiency of ventilation is answered highly. (3) The importance of kitchen ventilation of cooks was recognized very high. (4) The combustion gas was recognized as very high percentage and the most effective element of the kitchen on the human body to remove first inside the kitchen. (5) Most cooks were recognized that the improvement of ventilation equipments is necessary. (6) The object of ventilation equipments is appeared to maintain comfortable kitchen environment. (7) The optimum operation method of ventilation equipment uses the automatic system of ventilation equipment from the kitchen and it is necessary to maintain the optimum. This research is based on preceding studies, investigating special grade hotels and family restaurants in Seoul. The ventilation plan of the kitchen should be accomplished to improve the health of cooks and productivity.

• Journal of Yeungnam Medical Science
• /
• 제40권4호
• /
• pp.343-351
• /
• 2023

Diabetic foot is one of the most devastating consequences of diabetes, resulting in amputation and possibly death. Therefore, early detection and vigorous treatment of infections in patients with diabetic foot are critical. This review seeks to provide guidelines for the therapy and rehabilitation of patients with moderate-to-severe diabetic foot. If a diabetic foot infection is suspected, bacterial cultures should be initially obtained. Numerous imaging studies can be used to identify diabetic foot, and recent research has shown that white blood cell single-photon emission computed tomography/computed tomography has comparable diagnostic specificity and sensitivity to magnetic resonance imaging. Surgery is performed when a diabetic foot ulcer is deep and is accompanied by bone and soft tissue infections. Patients should be taught preoperative rehabilitation before undergoing stressful surgery. During surgical procedures, it is critical to remove all necrotic tissue and drain the inflammatory area. It is critical to treat wounds with suitable dressings after surgery. Wet dressings promote the formation of granulation tissues and new blood vessels. Walking should begin as soon as the patient's general condition allows it, regardless of the wound status or prior walking capacity. Adequate treatment of comorbidities, including hypertension and dyslipidemia, and smoking cessation are necessary. Additionally, broad-spectrum antibiotics are required to treat diabetic foot infections.

• 산업경영시스템학회지
• /
• 제38권1호
• /
• pp.152-161
• /
• 2015

Until a recent date, Toyota Production System (called TPS) was introduced by many domestic companies to remove waste and reduce manufacturing cost. However, cases of substantial and effective improvement after the introduction are not much. Even though many companies have actively conducted TPS during that time, the outcome is not satisfactory. In this paper, we show the problems and core contents to consider in applying of TPS as follows. First, the innovative organizational culture formed by active participation of employees and leadership of the CEO is very important for a successful introduction of TPS above all. Second, it is necessary to prepare various training programs optimized for the field in order to continuously improve the competency of employees in each class, and to train skilled personnel through that programs. Third, it is necessary to improve the maturity level of TPS application through the construction of correct evaluation system on accomplishment of the production system. In addition, the problems that occur should be solved through the continuous improvement activities. These results will help to TPS introduction of the domestic small-medium companies. Therefore, this study will contribute to strengthen and improve the global competitiveness in the related industries.

• Restorative Dentistry and Endodontics
• /
• 제42권2호
• /
• pp.77-86
• /
• 2017

Palatogingival groove (PGG) is an anomaly in the maxillary anterior teeth, often accompanied by the area of bony destruction adjacent to the teeth with no carious or traumatic history. The hidden trap in the tooth can harbor plaque and bacteria, resulting in periodontal destruction with or without pulpal pathologic change. Related diseases can involve periodontal destruction, combined endodontic-periodontal lesions, or separate endodontic and periodontal lesions. Disease severity and prognosis related to PGG depend on several factors, including location, range, depth, and type of the groove. Several materials have been used and recommended for cases of extensive periodontal destruction from PGG to remove and block the inflammatory source and recover the health of surrounding periodontal tissues. Even in cases of severe periodontal destruction, several studies have reported favorable treatment outcomes with proper management. With new options in diagnosis and treatment, clinicians need a detailed understanding of the characteristics, treatment, and prognosis of PGG to successfully manage the condition.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.29-35
• /
• 2014

The formula contains up between the text and the structural information, as well as their mathematical symbols. Research on-line or off-line recognition formula is underway actively used in various fields, and various forms of the equation are implemented recognition system. Although many documents are included in the various formulas, it is not easy to enter a formula into the computer. Recognition of the expression is divided into two processes of symbol recognition and structural analysis. After analyzing the location information of each character is specified to recognize the effective area after each symbol, and to the structure analysis based on the proximity between the characters is recognized as an independent single formula. Furthermore, analyzing the relationship between the front and back each time a combination of the position relationship between each symbol, and then to add the symbol which was able to easily update the structure of the entire formula. In this paper, by using a scanner to scan the book formula was used to interpret the meaning of the recognized symbol has a relative size and location information of the expression symbol. An algorithm to remove the formulas for calculation of the number of formula is present at the same time is proposed. Using the proposed algorithms to scan the books in the formula in order to evaluate the performance verification as 100% separation and showed the recognition rate equation.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.814-822
• /
• 2022

The deployment of sensors for Structural Health Monitoring requires a complicated network arrangement, ground truthing, and calibration for validating sensor performance periodically. Any conventional sensor on a structural element is also subjected to static and dynamic vertical loadings in conjunction with other environmental factors, such as brightness, noise, temperature, and humidity. A structural model with strain gauges was built and tested to get realistic sensory information. This paper investigates different deep learning architectures and algorithms, including unsupervised, autoencoder, and supervised methods, to benchmark blind drift calibration methods using deep learning. It involves a fully connected neural network (FCNN), a long short-term memory (LSTM), and a gated recurrent unit (GRU) to address the blind drift calibration problem (i.e., performing calibrations of installed sensors when ground truth is not available). The results show that the supervised methods perform much better than unsupervised methods, such as an autoencoder, when ground truths are available. Furthermore, taking advantage of time-series information, the GRU model generates the most precise predictions to remove the drift overall.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.1082-1088
• /
• 2003

본 논문은 CATV 가입자 망 관리 시스템 구현에 관한 것으로 기존의 수동형 관리 시스템의 비효율성을 제거하기 위해 자동화된 집중식 통합관리 시스템을 구현하였다. 이를 위해 기존의 주파수대역 중에서 비디오 신호의 송신에 사용되지 않은 대역을 확보하여 제어신호의 송수신이 이루어지는 제어대역으로 사용하는 송$.$수신 시스템 및 자동화 분배기를 설계하였으며, 상$.$하향통신 및 하향통신방식이 공유된 형태로 RS-232를 이용한 9600bps의 송수신 시스템 및 자동화 단말기를 구현하였다. 또한 구현된 시스템의 운영 관리를 위한 CATV망 통합관리 시스템의 구성은 가입자 관리를 위한 ID생성부, 송수신부, 제어부, 자료백업부로 구성되며 윈도우 기반의 C++로 구현하였다.