• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2947-2949
• /
• 1999

The MX-13 digital multiplexer for leased line is one of the main facilities, so it is periodically monitored by the operator. Operators connect dummy terminal to the MX-13 digital multiplexer manually, and execute preventing inspection. When alarms occurred, they are manually checked by the operator. But, in order to get mere efficiency of accident prevention and monitoring facilities with rapid response to the accident symptom, and to get higher reliability from the companies who lease communication lines, we need to construct this system which is adequate to monitor IvlX-13 digital multiplexer in almost real time. We construct remote monitoring system for MX-13 digital multiplxer to meet those requirement. After constructing the system, it's possible that the local operator can manage local monitoring system to check the status of MX-13 digital multiplexers. Also, Center operator can monitor the facility which has problems, and located in the specific local areas with the use of Center monitoring system.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1319-1327
• /
• 2018

Korea has a terrain vulnerable to drought due to the concentration of precipitation in summer and the large amount of groundwater discharge. Quantified drought indices are used to determine these droughts. Among these, drought index is mainly used for analysis of precipitation, and recently, researches have been conducted to monitor drought using satellite images. In this study, we used the KOMPSAT-2/3 image to calculate the water surface area and compare with the drought index in order to monitor the drought in the Upper Soyang River. As a result, it was confirmed that the tendency of the water surface area change and the trend of the drought index were similar in the satellite images. Future research could be used as a basis for judging drought.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.12
• /
• pp.17-23
• /
• 2020

As the number of households with companion animals increases, the demand to monitor the health of companion animals in remote locations far away is increasing. We are going to put a wearable device on a companion animal so that it can monitor the heart beat signal from a remote location. However, the monitoring method using Bluetooth has some disadvantages. it can be accessed only in a short distances. In case of WiFi, large power consumption is the problem. To overcome these issues, we propose a system to reduce power consumption by indirectly receiving a user's request using Bluetooth at a time when the user does not need it, and sending sensor data through WiFi when the user makes a monitoring request.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.4
• /
• pp.244-249
• /
• 2007

HL7 is well-Known standard protocol for text data generated in hospital information systems. In this paper, we have to design to obtain useful vital sign information, which is generated at data receiver modulor of HIS, that is offered by the central monitor. Vital sign informations of central monitor is composed of the row data of several bedsite patient monitors. We are willing to maintain vital sign information of real time and continuity that is generated from the bedsite patient monitor. It is able to apply to remote medical examination and treatment. we proposed integration method between vital sign database systems and hospital information systems. Through the proper exchange and management of patient vital sign information, real time vital sign information management will offer better workflow to all hospital employee.

• Journal of Hydrogen and New Energy
• /
• v.24 no.3
• /
• pp.264-274
• /
• 2013

Piping systems play an important role in gas and oil transferring system. In the piping system, there are many elements, such as valves and flow meters. In order to check their normal operating conditions, each signal from each element is displayed on the monitor in the pipe control room. By the way, there are several accidental cases in the piping system even if all signals from the local elements are judged to be normal on the monitor in the control room. Further, opposite cases often happen even the monitor shows abnormal while the local elements work normal. To overcome this abnormal functions, it is not so easy to construct the environment in which sensors detecting the working states of all elements installed in the piping system. In this paper, a new non-contact measurement technique which can calculate the elements' delicate displacements by using a PIV(particle image velocimetry) and diagnose their working states by using a neural network is proposed. The measurement system consists of a host computer, a micro system, a telescope and a high-resolution camera. As a preliminary test, the constructed measurement system was applied to measure delicate vibrations of mobile phones. For practical application, a pneumatic system was measured by the constructed system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.56-63
• /
• 2014

An offshore plant needs costly maintenance and has difficulty coping with various accidents coming from the exposure to the environmental threats such as typhoons, tidal waves and etc., in addition to the artificial ones such as fire, collision of ships and etc. In this paper, we develop the video-complex remote monitoring system for an offshore plant, using AtoN AIS and multi-stage database to monitor an offshore plant and solve those problems. The system handles real time video cameras to collect and monitor images on an offshore plant. So, users can be exactly and quickly aware of the information on various situations with the monitoring application based on ENC.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.132-137
• /
• 2004

On-Board Diagnostic(OBD) systems are in most cars and light trucks on the load today. During the 1970's and early 1980's manufacturers started using electronic means to control engine functions and diagnose engine problems. The CARB's diagnostic requirements to meet EPA emission standards have been designated as OBD with a goal of monitoring all of the emissions-related components, as well as the chassis, body, accessory devices and the diagnostic control network of the vehicle for proper operation. In this paper, we present a remote measurement system for the wireless monitoring of diagnosis signal and sensors output signals of ECU adopted KWP2000, united the OBD communication protocol, on OBD-compliant vehicle using the wirless communication technique of Bluetooth. In order to measure the ECU signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A microprocessor S3C3410X is used for communicating ECU signals. The embedded system's software is programmed to measure the ECU signals using the ARM compiler and ANCI C based on MicroC/OS kernel to communicate between bluetooth modules using bluetooth stack. The diagnostic system is developed using Visual C++ MFC and protocol stack of bluetooth for Windows environment. The self-diagnosis and sensor output signals of ECU is able to monitor using PC with bluetooth board connected in serial port of PC. The algorithms for measuring the ECU sensor output and self-diagnostic signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of self-diagnosis and sensor signals of ECU adopted KWP2000 in embedded system verified through the developed systems and algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.780-788
• /
• 2011

This paper suggests one model, which can be monitor and control target system at anytime and anywhere by a WAP and ME based personal cellular phone(Feature phone) and internet connection. The suggesting model tried to overcome constraints of distance and mobility of conventional methods, TCP/IP based remote data monitoring system, which combine PDA and WLAN technologies. For the experiments of suggesting model, the target systems are constructed with individual modules, which need AC or DC power control. The development software for the control and monitor of local system use NI Labview for the easy-programming and confidence. Also, web server use APM setup for the general user. The mobile connection environments of personal cellular phone are programmed by use WML and mHTML language for the general access. Through the experiments, we have showed that suggesting model can overcome constraints of distance and mobility of conventional system.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.408-411
• /
• 2017

In this paper, we propose an integrated control system that measures neutrons, gamma ray, and x-ray. The proposed system is able to monitor and control the data measured and analyzed on the remote or network, and can monitor and control the status of each part of the system remotely without remote control. The proposed system consists of a gamma ray/x-ray sensor part, a neutron sensor part, a main control embedded system part, a dedicated display device and GUI part, and a remote UI part. The gamma ray/x-ray sensor part measures gamma ray and x-ray of low level by using NaI(Tl) scintillation detector. The neutron sensor part measures neutrons using Proportional Counter Detector(low-level neutron) and Ion Chamber Type Detector(high-level neutron). The main control embedded system part detects radiation, samples it in seconds, and converts it into radiation dose for accumulated pulse and current values. The dedicated display device and the GUI part output the radiation measurement result and the converted radiation amount and radiation amount measurement value and provide the user with the control condition setting and the calibration function for the detection part. The remote UI unit collects and stores the measured values and transmits them to the remote monitoring system. In order to evaluate the performance of the proposed system, the measurement uncertainty of the neutron detector was measured to less than ${\pm}8.2%$ and the gamma ray and x-ray detector had the uncertainty of less than 7.5%. It was confirmed that the normal operation was not less than ${\pm}15$ percent of the international standard.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.763-772
• /
• 2019

High-resolution satellites capable of observing the Earth periodically enhance applicability of remote sensing in the field of national disaster management from national disaster pre-monitoring to rapid recovery planning. The National Disaster Management Research Institute (NDMI) has been developed various satellite-based disaster management technologies and applied to disaster site operations related to typhoons and storms, droughts, heavy snowfall, ground displacement, heat wave, and heavy rainfall. Although the limitation of timely imaging of satellite is a challenging issue in emergent disaster situation, it can be solved through international cooperation to cope with global disasters led by domestic and international space development agencies and disaster organizations. This article of special issue deals with the scientific disaster management technologies using remote sensing and advanced equipments of NDMI in order to detect and monitor national disasters occurred by global abnormal climate change around the Korean Peninsula: satellite-based disaster monitoring technologies which can detect and monitor disaster in early stage and advanced investigation equipments which can collect high-quality geo-information data at disaster site.