• 한국신뢰성학회지:신뢰성응용연구
• /
• 제15권3호
• /
• pp.154-162
• /
• 2015

We have performed accelerated photo-degradation test using a 10-Sun level high irradiance $Weather-Ometer^{(R)}$ (10-Sun Ci5000) in an attempt to study acceleration and correlation between accelerated and service conditions for ink-jet ink. The accelerated test was used to predict lifetimes of ink-jet ink through the calculation of scaling factor for intensity of irradiance and duration of usage combined with estimation of lifetime distribution and inverse power model as a life-stress model. The lifetimes and acceleration factors for foreign and domestic inks were compared with each other. The results showed that the failure mechanisms and life-stress models for ink-jet ink were different among the color of ink which means that we might be in need of further study by color of inks.

• 한국재료학회지
• /
• 제17권3호
• /
• pp.152-159
• /
• 2007

When the electronics are tested with thermal shock for Pb-free solder joint reliability, there are temperature conditions with use environment but number of cycles for test don't clearly exist. To obtain the long term reliability data, electronic companies have spent the cost and times. Therefore this studies show the test method and number of thermal shock cycles for evaluating the solder joint reliability of electronic components and also research bonding strength variation with formation and growth of intermetallic compounds (IMC). SMD (surface mount device) 3216 chip resistor and 44 pin QFP (quad flat package) was utilized for experiments and each components were soldered with Sn-40Pb and Sn-3.0 Ag-0.5 Cu solder on the FR-4 PCB(printed circuit board) using by reflow soldering process. To reliability evaluation, thermal shock test was conducted between $-40^{\circ}C\;and\;+125^{\circ}C$ for 2,000 cycles, 10 minute dwell time, respectively. Also we analyzed the IMCs of solder joint using by SEM and EDX. To compare with bonding strength, resistor and QFP were tested shear strength and $45^{\circ}$ lead pull strength, respectively. From these results, optimized number of cycles was proposed with variation of bonding strength under thermal shock.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.344-346
• /
• 1998

The OBCS(On-Board Computer System) achieves train system diagnosis and control. For commercial train operation, it must guarantee the reliability for safe and have low cost operational algorithm. To guarantee the diagnosis function and the control ability of OBCS, sufficient actual railway running test under severe conditions is required. But, running test has some limitations for making severe conditions because of safety and it demands quite long time and a lot of costs. So simulator is required and is utilized in many countries. We designed a simulator to test various functions and performance of controllers for high speed train's power car under various conditions and it is represented briefly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.169-171
• /
• 2001

This paper presents a method fer evaluation nodal probabilistic congestion and reliability indices of transmission systems using Monte Carlo simulation methods. Quantitative evaluation of transmission system reliability is very important because successful operation of an electric power system. In the deregulated electricity market depends on transmission system reliability management Monte Carlo methods are often preferable, when complex operating conditions are involved and/or the number of sever events is relatively large. To evaluate the reliability of a real power system, Monte Carlo Methods will be more useful. The characteristics and effectiveness of this methodology are illustrated by the case study using a small test system.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.700-707
• /
• 2013

Owing to high oil prices and environmental issues, the automobile industry has conducted considerable research and made large investments to manufacture a high-efficiency automobiles. In the case of automobile wheels in which a lightweight material is used to increase the fuel efficiency a mold is used to increase the production efficiency; however, the use of the molding method for this purpose is very expensive. Therefore an automobile wheel consists of two parts. In this study a two-piece automobile wheel is manufactured by the friction stir welding(FSW) of Al6061-T6 to reduce the manufacturing cost and process complexity. The FSW welding tool geometry and rotational speed, and the feed rate are key factors that significantly affect the weld strength. Therefore tensile tests were conducted on specimens produced using various welding conditions, and the optimal FSW welding conditions were applied to manufacture aluminum wheels. To ensure reliability, prototype aluminum wheels were manufactured and their mechanical reliability and safety were evaluated using a durability test, fatigue durability test, and impact test. Through this study, aluminum wheel production was made possible using the FSW method.

• 대한기계학회논문집A
• /
• 제39권9호
• /
• pp.831-837
• /
• 2015

사람과 전자기기들은 우리 주변의 환경 속, 특히 병원의 자기 공명 영상(Magnetic resonance imaging, MRI) 장비 또는 군용으로 사용되는 전자기 펄스(Electromagnetic pulse, EMP) 장비, 그리고 수많은 전자파를 만들어 내는 장치들에 노출되는 경우가 잦아졌다. 이러한 전자파는 사람과 전자기기에 유해하고, 이를 차폐하기 위해 사용되는 것 중에 하나가 핑거 스트립이다. 핑거 스트립은 열전도성이 좋기 때문에 전자파를 흡수하여 열로 변환한다. 이 특징을 효과적으로 이용하여 전자파 차폐가 필요한 실내의 특수 문짝에 핑거 스트립을 설치해서, 전자파로부터 사람과 전자기기들을 보호한다. 본 연구에서는 핑거 스트립의 주 고장모드에 영향을 주는 가속인자로 하중을 선택하여 가속수명시험을 실시한다. 가속수명시험의 결과로부터 핑거 스트립의 실사용조건 수명을 예측하며, 동일한 조건에서 실시한 수명 시험 결과와 비교하여 가속수명시험의 유효성을 평가하고자 하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.608-613
• /
• 2002

In this paper we developed the MPC sensor for steering control and steering control of the AGVDS(Autonomous Guided Vehicle Driving System) for Durability test. Among durability tests, the accelerated durability test has been widely used to evaluate the durability of vehicle structure and chassis parts in a short period of time on the designed road that has severe surface conditions. However it increased the drivers fatigue mainly caused by the severe driving conditions. The driver's difficulty to maintain the constant speed and control the steering wheel reduces the reliability of test results. In addition to the general detecting sensor for steering control was restricted by surrounding condition. So we need to develop steering control sensor was robust in the bad driving condition. In this paper we developed steering control sensor using magnetic induction which is robust in the bad driving condition and implemented the AGVDS.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.167-175
• /
• 2007

정밀한 구조물의 상태진단 혹은 안전성 평가는 비파괴 시험의 정밀성(Accuracy), 변이성(Variability) 등과 같은 여러 가지 요소에 의하여 좌우된다. 특히 비파괴 시험을 이용한 측정값과 구조물의 상태에 있어서의 불확실성(Uncertainty)은 정밀한 상태진단에 큰 영향을 미친다. 비파괴 시험을 활용함에 있어서의(간접조사) 신뢰할만한 비파괴 장비라면 현 구조물의 상태(피해면적)를 정확하게 나타낼 수 있어야 한다. 본 논문은 현재 사용이 증가되고 있는 비파괴 장비의 올바른 선택과 정확한 구조물의 안전 진단을 위하여, 비파괴장비의 성능 평가에 있어 확률적 기초를 제공한다.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.5-8
• /
• 2009

The reliability of multilayer ceramic capacitor with active thin dielectric layer was investigated by highly accelerated life test at various stress condition. The distribution of multilayer ceramic capacitor failure times is plotted as a function of time from Weibull distribution function. According to the test result, voltage acceleration factor is obtained from 2.24 to 2.96. The acceleration by temperature is much higher than other values of active thick dielectric layer. It is clear that median time to failure is affected by the stress voltage for high volumetric efficiency ceramic capacitors with active thin dielectric layer. The degradation under stress of voltage involves electromigration and accumulation of oxygen vacancy at Ni electrode interface of cathode.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.487-500
• /
• 2005

MEMS devices usually have micro actuators contained in a cavity, If the pressure level of testing chamber is higher than that of cavity, moisture will ingress into the cavity, which may cause critical failure such as stiction of the moving parts. To design an accelerated life test based on high temperature and high humidity, such a phenomena should be considered. In this study, a throughput model that can estimate the amount of moisture ingress is used to decide the testing time and conditions of a high temperature and high humidify test.