• Journal of Applied Reliability
• /
• v.18 no.2
• /
• pp.122-129
• /
• 2018

Purpose: This article develops an optimal reliability acceptance sampling plan for the case where the degradation quantity of the performance characteristic follows Weibull distribution. Method: For developing reliability acceptance sampling plans, the sample size and the acceptance constant are determined based on the accelerated characteristic of the test condition and the product. Results: The sample size and the acceptance constant are provided such that the constraints of the producer and the consumer risks are satisfied. Conclusion: Reliability acceptance sampling plans based on the accelerated degradation test method can be used for the quality control within a resonable amount of cost and time. In this article. an optimal reliability sampling plans are newly developed for this purpose.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.145-151
• /
• 2004

Reliability assurance problem is an important issue in advanced company with good R&D capacity. In Korea, long-term and large-scale project for reliability improvement and certification have been conducted from 2000, 4 years ago. Generally, assurance is composed of system assurance and lot assurance. For reliability lot assurance. it is prerequisite to development reliability sampling plan with time-saving and minimum cost. In this paper, we aim to investigate previous study on reliability lot assurance focused on reliability sampling plans and propose some suggestions for the future study.

• International Journal of Reliability and Applications
• /
• v.15 no.2
• /
• pp.77-84
• /
• 2014

In this paper, a optimal designing methodology is proposed to determine the parameters for skip-lot sampling plan of type SkSP-2 plan with double sampling plan as reference plan, when the lifetime of the product follows generalized exponential distribution. The two points on the operating characteristic curve approach are used to find the optimal parameters for the proposed plan. The plan parameters are determined so as to minimize the average sample number subject to satisfying simultaneously both producer and consumer risks at the acceptable and limiting quality levels respectively.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.74-96
• /
• 2002

The objectives of this study is to suggest the rectifying sampling inspection plan considering quality cost. Limiting quality level(LQL) plans(also called LTPD plans) and outgoing quality(OQ) plans are considered. The Hald's linear cost model is discussed with and without a beta prior for the distribution of the fraction of nonconforming items in a lot. It is assumed that the sampling inspection is error free. We consider the design of reliability acceptance sampling plan (RASP) for failure rate level qualification at selected confidence level. The lifetime distribution of products is assumed to be exponential. MIL-STD-690C and K C 6032 standards provide this procedures. But these procedures have some questions to apply in the field. The cost of test and confidence level(1-$\beta$ risk) are the problem between supplier and user. So, we suggest that the optimal life test sampling inspection plans using simple linear cost model considering product cost, capability of environment chamber, environmental test cost, and etc. Especially, we consider a reliability of lots that contain some nonconforming items. In this case we assumed that a nonconforming item fail after environmental life test. Finally, we develope the algorithm of the optimal sampling inspection plan based on minimum costs for rectifying inspection and RASP. And computer application programs are developed So, it is shown how the desired sampling plan can be easily found.

• International Journal of Reliability and Applications
• /
• v.6 no.1
• /
• pp.31-39
• /
• 2005

An economic life test sampling plan for products with exponential lifetime distribution is developed. To reduce test time, a test plan with curtailed Type II censoring is considered. A cost model is constructed which involves three cost components; test cost, accept cost, and reject cost. Determination of optimal plan minimizing the expected average cost per lot is discussed with a constraint related to consumer's risk. Some numerical examples are provided.

• Industrial Engineering and Management Systems
• /
• v.9 no.1
• /
• pp.54-59
• /
• 2010

A two-plan sampling system is proposed for a failure-censored life testing when the lifetime follows a Weibull distribution with known shape parameter. The proposed sampling system is based on a switching rule, for switching between the tightened and the normal inspection levels when lots are submitted for inspection in the order of production or in some other systematic way. The design parameters of the proposed sampling system are determined by the two-point approach considering the producer's risks and the consumer's at the specified acceptable reliability level and the lot tolerance reliability level, respectively. It has been observed that the proposed system requires only a single failure for the observation.

• Communications for Statistical Applications and Methods
• /
• v.17 no.1
• /
• pp.89-98
• /
• 2010

In this paper, a two-stage group sampling plan based on the time truncated life test is proposed for the Weibull distribution. The design parameters such as the number of groups and the acceptance number in each stage are determined by satisfying the producer's and consumer's risks simultaneously when the group size and the test duration are specified. The acceptable reliability level is expressed by the ratio of the true mean life to the specified life. It was demonstrated from the comparison with single-stage group sampling plans that the proposed plan can reduce the average sample number or improve the operating characteristics.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.123-134
• /
• 2007

This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.

• Industry Promotion Research
• /
• v.8 no.1
• /
• pp.111-117
• /
• 2023

Sampling inspection methods for quality control have been proposed a lot in the industry. However, the sampling inspection method for reliability, which is a quality over time, has been relatively less presented, and there are not many literatures that are clearly summarized. Therefore, this paper focuses on the reliability conformity test to verify that the reliability evaluation scale value of the target is satisfied during the reliability test. To this end, first, we look at the conditions that both consumers and producers can satisfy in terms of the OC curve and find out what sampling methods satisfy the desired level of producer risk and consumer risk. Next, two methods of the reliability sampling methods such as attribute and variable reliability sampling methods are examined. Specifically, the attribute reliability sampling method is a form of sampling plan where n samples are tested for a certain period of T hours and the lot is accepted if the number of failures is less than or equal to a certain number c. On the other hand, the variable reliability sampling method is a form of sampling plan where the lot is accepted if the reliability evaluation scale such as MTBF satisfies a certain standard. Both sampling plans may also use inspection tables.

• Communications for Statistical Applications and Methods
• /
• v.17 no.3
• /
• pp.319-326
• /
• 2010

In this paper, a new group sampling plan for the lot acceptance is proposed for the time truncated life test, which can be utilized when multi-item testers are implemented. The design parameters are found using the two-point approach such that the producer's and consumer's risks are satisfied simultaneously at the acceptable reliability level and the lot tolerance reliability level, respectively. The case of Weibull distribution is described to illustrate the procedure that can be used when the quality level is expressed by a multiple of the specified life. The advantage of the proposed plan is demonstrated by comparing with the existing plan in terms of the sample size required. The tables are constructed and some examples are given to illustrate the procedure developed here.