• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.142-154
• /
• 2011

This study predicted the probability of corrosion initiation of reinforced concrete tunnel boxes structures using the Monte Carlo Simulation. For the inner wall and outer wall in the tunnel boxes, exposed to airborne chloride ion and seawater directly respectively, statistical values of parameters like diffusion coefficient D, surface chloride content $C_s$, cover depth c, and the chloride threshold level $C_{lim}$ were examined from experiment or literature review. Their average values accounted for $3.77{\times}10^{-12}m^2/s$, 3.0% by weight of cement, 94.7mm and 45.5mm for outer wall and inner wall, respectively, and 0.69% by weight of cement for D, $C_s$, c, and $C_{lim}$, respectively. With these parametric values, the distribution of chloride contents at rebar with time and the probability of corrosion initiation of the tunnel boxes, inner wall and outer wall, was examined by considering time dependency of chloride transport. From the examination, the histogram of chloride contents at rebar is closer to a gamma distribution, and the mean value increases with time, while the coefficient of variance decreases with time. It was found that the probability of corrosion initiation and the time to corrosion were dependent on the time dependency of chloride transport. Time independent model predicted time to corrosion initiation of inner wall and outer wall as 8 and 12 years, respectively, while 178 and 283 years of time to corrosion was calculated by time dependent model for inner wall and outer wall, respectively. For time independent model, the probability of corrosion at 100 years of exposure for inner wall and outer wall was ranged 59.5 and 95.5%, respectively, while time dependent model indicated 2.9 and 0.2% of the probability corrosion, respectively. Finally, impact of $C_{lim}$, including values specified in current codes, on the probability of corrosion initiation and corrosion free life is discussed.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.578-585
• /
• 2012

CNS/ATM(Communication Navigation Surveillance/Air Traffic Management) was adopted as a standard navigation system of 21st century. Therefore, ICAO(International Civil Aviation Organization) members are developing the technology and infrastructure of CNS/ATM. ADS-B(Automatic Dependent Surveillance-Broadcast) system and Multilateration system are being implemented in the surveillance field of CNS/ATM. Multilateration system is installed in order to complement radar system and to surveil blind areas. Also, Multilateration system using TDOA(Time Difference Of Arrival) is more accurate than radar. In this paper, we applied an IMM(Interacting Multiple Model) filter which is widely used in radar systems to the Multilateration data in order to improve the reliability of the Multilateration data. Comparisons with the original Multilateration data and the Multilateration data with the IMM filter show that the ADS-B data with the IMM filter provides a better performance: 38.37% near the airport, 20.86% around 10 miles of the airport.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.9
• /
• pp.20-28
• /
• 1992

Dielectric thin film of N/O ($Si_{3]N_{4}/SiO_{2}$) for high density stacked dynamic-RAM cell was formed by LPCVD and oxidation(dry & pyrogenic oxidation methods) of the top 7nm $Si_{3]N_{4}$ film. The thickness, structure and composition of this film were measured by ellipsometer, high resolution TEM, AES and SIMS. The insulating characteristics(I-V characteristics) were investigated by HP 4145, and the characteristics of TDDB (Time Dependent Dielectric Breakdown) were evaluated by using CCST(Current Constant Stress Time) method. In this experiment, The optimum oxidation condition for preparation of good insulating and TDDB characteristics of N/O film was pyrogenic oxidation at 85$0^{\circ}C$ for 30 minutes. The leakage current was reduced from 400pA to 7.5pA when SiO$_{2}$ film with thickness of 2nm was formed on the top of $Si_{3]N_{4}$ film by the pyrogenic oxidation method.

• Advances in Energy Research
• /
• v.3 no.2
• /
• pp.81-95
• /
• 2015

Microgrid, which can be considered as an integration of various dispersed resources (DRs), is characterized by number of DRs interfaced through the power electronics converters. The microgrid comprising these DRs is often operated in an islanded mode. To minimize the cost, reduce complexity and increase reliability, it is preferred to avoid any communication channel between them. Consequently, the droop control method is traditionally adopted to distribute active and reactive power among the DRs operating in parallel. However, the accuracy of distribution of active and reactive power among the DRs controlled by the conventional droop control approach is highly dependent on the value of line impedance, R/X i.e., resistance to reactance ratio of the line, voltage setting of inverters etc. The limitations of the conventional droop control approach are demonstrated and a modified droop control approach to reduce the effect of impedance mis-match and improve the time response is proposed. The error in reactive power sharing is minimized by inserting virtual impedance in line with the inverters to remove the mis-match in impedance. The improved time response is achieved by modifying the real-power frequency droop using arctan function. Simulations results are presented to validate the effectiveness of the control approach.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.87-96
• /
• 2015

Purpose - Several domestic telecommunication companies have made a considerable effort to continuously grow and survive, and they have strived to thrive in the midst of mature market competition. To overcome this challenging situation and to grow continuously, while still meeting customer needs that are becoming more diverse and complicated with the passage of time, extensive support for internal marketing is essential. Without such internal support, companies face serious limitations and market roadblocks. The communication industry is a high-level service industry and a basic communications industry characteristic is its significant dependence on the employees delivering the services. Therefore, entrepreneurs in the information/communications industry, as well as existing competitors, should look to satisfy external customers through critical investment in internal customers (employees). Therefore, it is important for research to examine how internal factors influence technology innovation and service quality, which are the key drivers for companies that are seeking leading market positions. Research design, data, and methodology - The purpose of this study is to analyze the relationship of technology innovation and perceived service quality with the internal marketing factors in the communication industry and to offer suitable and effective internal marketing suggestions. The independent variables of this study are internal communication, education and training, the support of the executives, reward systems, and empowerment. The dependent variables are technology innovation and perceived service quality. Utilizing these, this paper studies the influence of internal marketing factors on technology innovation and perceived service quality. Results - The study results revealed the following. First, the identified internal marketing factors have a positive effect on technology innovation. Among the five internal marketing factors, three had a significant effect on product innovation, empowerment, the support of executives, and education and training, in this order. Second, the internal marketing factors also had a positive effect on the process innovation of technology innovation. The marketing factors, the support of executives, empowerment, internal communication, and education and training, in this order, significantly affect process innovation. Third, technology innovation had a positive effect on perceived service quality. All of the five service quality factors, namely, tangibles, reliability, assurance, responsibility, and empathy, in this order, significantly affect product innovation. Additionally, tangibles, reliability, responsibility, empathy, and assurance, in this order, significantly affect process innovation. Fourth, product and process innovation significantly affect tangibles and reliability in technology innovation. To enhance tangibles and reliability, process innovation should first be enhanced. Fifth, product and process innovation significantly affect responsibility and empathy in technology innovation. To enhance the responsibility and empathy, process innovation should first be enhanced. Sixth, product and process innovation significantly affect assurance in technology innovation. To enhance the assurance, product innovation should first be enhanced. Conclusions - According to the results, a company's internal marketing factors have a positive and significant effect on technology innovation and, further, product and process innovation have a positive and significant effect on the perceived serviced quality.

• Culinary science and hospitality research
• /
• v.5 no.2
• /
• pp.447-467
• /
• 1999

Most published work on product quality focuses on manufactured goods. The subject of service quality has received less attention. This distinction is important because some of the quality-improving strategies avaliable to manufacturers may be inappropriate for service firms. Services are performances, not objects. They are often produced in the presence of the customer, as in the cause of hotel restaurant services, quality occurs during service delivery, usually in an interaction between the customer and contact personnel of service firm. for this reason, service quality is highly dependent on the performance of employees, an organizational resource that cannot be controlled to the degree that components of tangible goods can be engineered. The study has begun as a basic study for customer satisfaction-oriented management in understanding the service quality of food & beverage products and through a systematic analysis of it. The major purpose of the study was to examine the relationship of the customer satisfaction and service quality in consideration of reliability, empathy, responsiveness, tangibility and assurance. An empirical research was conducted based on the previous theoretical studies. 286 customer at first class hotels in Seoul were selected as samples of this study. The time period of research was from February through March 1999, and answers were processed by SAS to yield frequency analysis, multivariate statistical analysis and regression analysis. The finding of the statistical treatment are frequencies, factor analysis, multiple regression analysis, path analysis. SERVQUAL method was used the service quality evaluation methods. After factor analysis, it was resulted to 3 factors. those were factor 1(assurance.empathy.responsiveness), factor 2(reliability), factor 3(tangibility). The findings of the statistical treatment are as follows. First, the attribute measurement of performance service quality was affected by customer satisfaction. Second, the attribute measurement of performance service qualify was affected by repurchase intention. Third, The attribute measurement of performance customer satisfaction was affected by repurchase intention. The result of study model was followed, service quality was affected repurchase intention than customer satisfaction. indirected effect through, service duality and customer satisfaction was affected repurchase intention.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.245-253
• /
• 2010

The reliability problems of flip chip packages subjected to temperature change during the packaging process mainly occur due to mismatches in the coefficients of thermal expansion as well as features with time-dependent material properties. Resin molding compounds like glass fiber reinforced epoxy composites used as the dielectric layer in printed circuit boards (PCB) strongly exhibit viscoelastic behavior, which causes their Young's moduli to not only be temperature-dependent but also time-dependent. In this study, the stress relaxation and creep tests were used to characterize the viscoelastic properties of the glass fiber reinforced epoxy composite. Using the viscoelastic properties, finite element analysis (FEA) was employed to simulate thermal loading in the pre-baking process and predict thermal warpage. Furthermore, the effect of viscoelastic features for the major polymeric material on the dielectric layer in the PCB (the glass fiber reinforced epoxy composite) was investigated using FEA.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.20-29
• /
• 2007

The engagement control software embedded in the weapon control computer of the fire control center for air defense missile system is large-scale real-time software. The use of typical software development methodologies is not appropriate to develop such large-scale embedded software in terms of reusability, reliability, and productivity for the reason that it is significantly complicated, and highly dependent on hardware platforms and developers. In this paper, a model-based software architecture using components based on UML 2.0 for the engagement control software is presented in order to solve these problems. This software architecture is verified using the black-box test, the scenario-based test, and the Ethernet packet monitoring test methods. The results demonstrate that the developed software architecture can be employed to enhance reusability, maintainability, and productivity of large-scale embedded software.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.297-305
• /
• 2000

It is observed that the initial properties and degradation characteristics on plasma of n/p-MOSFET with polycide and poly-Si as different gate materials under F-N stress and hot electron stress are affected by metal AR(Antenna Ratio) during plasma process. Compared to that of MOS devices with poly-Si gate material, reliability properties on plasma of MOS devices with polycide gate material are improved. This can be explained by that fluorine of tungsten polycide process diffuses through poly-Si into gate oxide and results in additional oxide thickness. The fact that MOS devices with polycide gate material can reduce damages of plasma process shows possibility that polycide gate material can be used as gate material for next generation MOS devices.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.231-236
• /
• 2014

With the development of industry these days, the demand for electric power increases and the larger capacity for power transfer is required. The scales of facilities should become larger; and the relative systems are required to operate with a higher degree of reliability. Therefore, stabilization of electric power systems is an important issue. The high degree of reliability required in the process of production and supply of electric power is an essential part of industrial society. Accident such as blackouts causes a hugh amount of economic losses to the high-tech industrial society dependent upon electric power. In this paper, in order to determine a stable operation of high-voltage power cable, used as a unique means of delivering electric power generated at a power station, we figure out the time rate of change of insulation resistance following a decay accelerating factor Arrhenius equation. With the data from the insulation resistance, we can determine the lifetime of power cable in operation.