• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.3-5
• /
• 2009

In this paper, we exploit the cooperative diversity relay protocol to compensate for defects of wireless communication in 60 GHz. We derive and proof results of the numerical expressions versus various scenarios using the computer simulations. Optimal location and scaling factor of relay are presented through analysis of performances and compared between direct-path and time diversity transmission. Consequently, our results confirm that cooperative diversity relay protocol is an effective mean of enhancing the performance of wireless communication systems in 60 GHz.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.334-336
• /
• 2003

This paper describes the influences of the large scaled wind farm interconnected with 154 kV power networks on the operational characteristics of distance relay applied in the transmission line. The wind farm composed of wind turbine generators are one of the great energy sources: they can supply the power into an interconnected network not only the normal conditions, but also the fault conditions of power network. Therefore, the distance relay applied in the transmission tine may mal-operate due to the contribution of wind farm. This paper presents the operational characteristics of distance relay for the fault occurred in the transmission line interconnected with wind farm. Simulation results show that it is difficult to recognize the fault location due to the power output of wind farm.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.94-99
• /
• 2010

In this paper, we discuss a proposed two hop relay network with PB/MC-CDMA(partial block MC-CDMA) technique. The main advantages of PB/MC-CDMA system are the increased cell capacity and the high quality of performances. In the system, we employ relay scheme to focus on the coverage reduction and hotspot problem, hotspot is a location where a cluster of users are blocked or dropped for the reason of insufficient frequency resources. Frequency resource allocation scheme is put forward in a three cells system according to each problem. The simulation result shows the performance of the two hop transmission is better than the direct transmission and the proposed network can support much more users to relief hotspot effect compared to the conventional one.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.894-896
• /
• 2010

In mobile wireless sensor network, Whole nodes can move. In mobile wireless sensor network based on clustering, there can be frequent re-configuration of cluster according to frequent changes of location. Frequent reconfiguration of the cluster cause a lot of power consumption and data loss. To solve this problem, we suggest relay method for sending reliable data and decreases a number of re-configuration of cluster using relay node.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.517-527
• /
• 2012

This paper considers a cooperative communication system with a single relay node, where two-layer superposition coding and successive decoding is employed to reduce the expected distortion of a Gaussian source delivered. For the system, we propose a relay scheme which forwards an appropriate relay signal at the relay node, based on the local decoding result of layers and the decoding result of layers at the destination node fed back to the relay node. In the scheme, the relay signal is designed not only by applying decode-and-forward but also by applying amplify-and-forward to reduce the outage probability in final decoding of each layer. The performance of the proposed scheme is evaluated numerically in terms of the expected distortion at various relay locations using outage probabilities derived. The results show that the proposed scheme outperforms the conventional schemes in most cases of the relay location and the gain gets larger when the relay node is closer to the source node in particular.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.922-937
• /
• 2024

Maritime activities are on the rise, there is a growing demand for high-quality communication services that can cover larger areas. However, the transmission of high data rates to maritime users is challenging due to path loss from land base stations, which limits the transmission power. To overcome this challenge, researchers have been exploring the use of buoys in a marine environment as relays for communication technology. This paper proposes a simulation-based approach to investigate the impact of various beamwidths on communication performance when using a buoy as a relay. The objective is to determine the optimal beamwidth that yields the highest data rate for the target location. The approach is based on an offshore wave model where the direction of the buoy changes according to the height of the wave. The study investigates the performance of the relay in the downlink situation using receive beamforming, and the capacity at the user in the three-hop situation is verified using an amplify-and-forward (AF) relay that uses transmit beamforming to the user. The simulation results suggest that the beamwidth of the relay should be adjusted according to the wave conditions to optimize the data rate and relay position that satisfies a data rate superior to the direct path to the target position. Using a buoy as a relay can be a promising solution for enhancing maritime communications, and the simulation-based approach proposed in this paper can provide insights into how to optimize beamwidth for effective communication system design and implementation. In conclusion, the study results suggest that the use of buoys as relays for maritime communication is a feasible solution for expanding coverage and enhancing communication quality. The proposed simulation-based approach provides a useful tool for identifying relay beamwidths for achieving higher data rates in different wave conditions. These findings have significant implications for the design and deployment of communication systems in maritime environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.31-39
• /
• 2011

For rapid formed the ad hoc wireless backbone network in disaster scene, It is necessary for real-time deployment scheme of wireless ad hoc relay devices by first responders without pre-planning. However, in order to realize this scheme, redundant deployment should be minimized, as well as optimal location of relay devices should be selected to expand communication coverage. Therefore, in this paper, we propose a new deployment scheme of relay devices to optimize communication coverage and then through simulations showed that improved performance of algorithm.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.1
• /
• pp.100-105
• /
• 2002

This paper represents impedance calculation of the distance relay using PSCAD/EMTDC software for transmission line involving the UPFC(Unified Power Flow Controller)device, which is the most vigorous component of FACTS. The presence of the UPFC significantly affects the line parameters of transmission system, which are also influenced by the distance relay setting. Moreover, depending on the UPFC location and its parameters, zones of setting the distance relay will be changed. The presence of the UPFC in the fault loop affects both voltage and current seen by relay. Therefore, the distance relay should be taken into account the variable injected voltage of the UPFC.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1824-1833
• /
• 2016

In this paper, we propose networked airborne relay-based positioning scheme (N-ARPS) based on time division multiple access (TDMA) networks to improve the performance of relative navigation (RelNav). To integrate the ARPS into TDMA, there are three problems such as slot allocation, selection of airborne relays, and method for signal loss to be solved. A subframe of N-ARPS is designed to assign the slots for broadcast and relay of navigation signals consecutively to minimize the effect of mobility. The selection algorithm determines the optimum set of airborne relays by selecting evenly distributed nodes depending on their distances to the master station. Finally, we uses precise position location information (PPLI) messages, which are received in data transmission period, to estimate a user position when the navigation signals are missing. The simulation results indicate that N-ARPS significantly improves user accuracy over RelNav.