• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.475-478
• /
• 2003

This study was conducted to compare the design rainfall derived by the at-site and regional frequency analysis based on the regionalization of the precipitation. The regional and at-site design rainfalls were calculated by Log-Pearson type III distribution using Indirect Methods of Moments(WRC). The regional and at-site analysis for the design rainfall were tested by Monte Carlo simulation. Relative root-mean-square error(RRMSE), Relative bias(RBIAS) and Relative reduction(RR) in RRMSE were computed and compared between design rainfalls resulted from observed and simulated data using the regional and at-site analysis. It was shown that the regional analysis procedure can substantially reduce the RRMSE, RBIAS in comparison with those of at-site analysis. Consequently, optimal design rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.201-204
• /
• 2005

The bond characteristics of two types hybrid FRP (fiber reinforced polymer) reinforcing bars with different rib geometry were analyzed experimentally. Two types of hybrid FRP. reinforcing bars such as spiral and cross type with different relative rib area were considered in this test. All testing procedures including specimens preparation, set-up of test equipments and measuring devices were made according to the recommendations of CSA Standard S806-02. From the test results, it was found' that cross type hybrid FRP reinforcing bars showed the higher bond strength than that of spiral type's due to the higher relative rib area.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.546-550
• /
• 2014

Relative reactivity of various carbonyl and acid derivatives in MPV-type (Meerwein-Ponndorf-Verley) reduction with an DIBAL(F) model has been studied via DFT and MP2 methods. Free energies of initial adduct formation (-Gadd) of DIBAL(F) model and carbonyls are in the order of amide < ester < aldehyde < ketone < acid chloride; in the alan-amide adduct, the developed positive charge at carbonyl carbon is expected to be stabilized by amide resonance, but in the acid chloride adduct it is destabilized by inductive effect of chloride. However the TS barrier energies (${\Delta}G_{TS}$) for the MPV-type hydride reduction of the carbonyl adducts are in the order of aldehyde < ketone < acid chloride << ester < amide; presumably decreasing order of electrophilicity of carbonyl carbon at adducts, which is well correlated with experimental data. It is noted that the relative reactivity of carbonyl derivatives in MPV-type reduction with DIBAL(X) is not governed by the alan-adduct formation energies, but follows the order of electrophilicity of carbonyl carbon of transition states.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.497-507
• /
• 2020

Two-dimensional laboratory experiments were conducted in a wave flume to investigate the wave transmission phenomena of rubble-mound type submerged structures armored with Tetrapods. Different experimental conditions were included by considering relative crest depth, relative freeboard, relative crest width, wave steepness, and so on. An empirical formula was proposed to predict the wave transmission coefficients over various specifications and structural designs of the partial perforated (rubble-mound) type submerged structure from the experimental results. The proposed formula successfully predicted the wave transmission coefficients. In this study, the proposed empirical formula of the wave transmission over the rubble-mound type submerged structure was improved from the existing formula.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2335-2339
• /
• 2013

Relative reactivity of various Al-substituted dialkylalans ($AlR_2(X)$) in reduction of acetone has been studied with density functional theory and MP2 method. Formation of the alan dimers and the alan-acetone adduct, and the transition state for the Meerwein-Ponndorf-Verley (MPV) type reduction of the adduct were calculated to figure out the energy profile. Formation of dimeric alans is highly exothermic. Both the relative free energies for acetone-alan adduct formation and the TS barriers for the MPV type reduction with respect to alan dimers and acetone were calculated and they show the same trend. Based on these energetic data, relative reactivity of alans is expected to be; $AlR_2(Cl)$ > $AlR_2(OTf)$ > $AlR_2(O_2CCF_3)$ > $AlR_2(F)$ > $AlR_2(OMs)$ > $AlR_2(OAc)$ > $AlR_2(OMe)$ > $AlR_2(NMe_2)$. The energy profile is relatively well correlated with the experimental order of the reactivity of Al-substituted dialkylalans. It is noted that the substituents of alans have initial effects on the relative free energies for the carbonyl-adduct formation. Therefore, an $AlR_2(X)$ which forms a more stable carbonyl-adduct is more reactive in carbonyl reduction.

• Journal of Environmental Science International
• /
• v.22 no.12
• /
• pp.1599-1610
• /
• 2013

In order to verify the healing effect in the variety of effects according to fountain type, anion which is the representatives factor of healing, as the center of case studies which in Gwanghwamun(Ground fountain), Cheonggyecheon(Waterfall) and Myeongdong(Formative fountain). According to fountain type, the anion distribution as follow, figures typically$ 15,721{\pm}419ea/cm^3$, Formative fountain $40,190{\pm}788ea/cm^3$, Waterfall $4.480{\pm}290ea/cm^3$ and ground fountain $2.492{\pm}180ea/cm^3$. It is usually exceed to the distribution in natural green, which is $1070{\sim}2100ea/cm^3$. The interrelation between air temperature, relative humidity, wind speed and relative humidity, and wind speed is that, the relative humidity is directly proportional to wind speed and inversely proportional to temperature. As the temperature goes up, the distribution of anion goes down. And as the wind speed and relative humidity goes up, the distribution of anion decrease sharply. The result of interrelation between fountain type and the anion distribution is that, the distance of water falling is directly proportional to the anion distribution in the formative fountain and inversely proportional in the ground fountain. And the distribution of anion is largest in formative fountain. The distribution of anion in ground fountain is lower than in formative fountain, but it is far more than in natural greenery. And as the distance from fountain increase, the distribution of anion goes down.

• Journal of Sasang Constitutional Medicine
• /
• v.2 no.1
• /
• pp.71-85
• /
• 1990

673 third-year students of boy's and girl's high schools in Taegu city and Kuni-gun and Youngyang-gun and Euisung-gun in Kyongbuk province were selected and investigated as the subject, of this study on the correlation between Lee Jae Ma's Four Types of Essential Physical Constitution and Physical Form index. The result of the study was found as follows. First, as for Height, the findings were not identical with the expression that "person of shaoyin(minor Yin) Type are short and small -- while person of Taiyin (major Yin) Type are tall and big," cited in classification of four different constitutions in a document named "Dong-Eu-Su-Se-Bo-Won". Comparison of persons of Shaoyang (minor Yang) - Type proved infitness due to the lack of data on Height in documents concerning Lee Jae Ma's four types of essential physical constitution. Second, as for Sitting Height, the correlation was prored between the findings of this study and the expression in the above document describing external physical characteristics of shaoyin-Type persons that "The upper part and' the lower part of the body are well balanced", but in point of Relative Sitting Height, none between the two. Third, as for Chest-Girth and Relative Chest-Girth plus Weight and Relative Weight, the expression that "Persons of Taiyin(major Yin) Type have the largest physique of the lour types of persons in the characteristics of external physical features, and that they also tend to have continental(widechest or large-scaled) character and strong nerve, that they are stoutly-built and fal." proved to have the correlation with the findings of this study. Fourth, in point of Chest-Girth and Relative Chest-Girth, this study found that its findings have the correlation with the phrase that "Chests are well developed upwar -- and sturdy and solid." in describing the characteristics of Shaoyang (minor Yang)-Type person' external physical features, and that with the phrase that "Chests are narrow" in the case of Shaoyin(minor Yin)-Type persons. Fifth, as for Weight and Relative Weight, the correlation was found between the findings and the expression that "shaoyin-Type persons have comparatively less flesh" as a sign of external physical characteristics of Shaoyin-Type persons. The above-cited findings proved that there exist some correlations between external physique of the Lee Jae Ma's four types of essential constitution and physical Form Indexes. Actually, however, in clinical classification, it is desirable that this approach should be consulted only after carefull consideration based on Lee Jae Ma's theory, and it seems imperative to continue the study of objectivization of Lee's theory.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.3
• /
• pp.655-662
• /
• 2004

In this paper, we assume that strengths of two components system follow a type II bivariate Pareto model with bivariate type I censored data. And these two components are subjected to a common stress which is independent of the strengths of the components. We obtain estimators for the system reliability based on likelihood function and relative frequency, respectively. Also we construct approximated confidence intervals for the reliability based on maximum likelihood estimator and relative frequency estimator, respectively. Finally we present a numerical study.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.63-69
• /
• 1998

Korean constitutional type(Sasang Chejil) was considered with anxiety level and personality type in order variability frequently encountered in EEG research. Sasang Chejil type seems a very important factor to be controled to minimize the variabilty since Sasang Cheji subgroups showed distinct differences in EEG relative power ao more recording sites and frequency bands than the subgroups of anxiety level and personality type, well-reconized variability-contribution factors. It is likely that Tae-Eum Chejil type is predispositioned to be more relaxed and feel happier and less unhappy than So-Yang type since the former showed greater alpha relative powers and left-hemisphere activations at both of the resting and emotional states.

• Imaging Science in Dentistry
• /
• v.34 no.1
• /
• pp.13-18
• /
• 2004

Purpose : This study was to evaluate the influence of slice thickness of computed tomography (CT) and rapid protyping (RP) type on the accuracy of 3-dimensional medical model. Materials and Methods: Transaxial CT data of human dry skull were taken from multi-detector spiral CT. Slice thickness were 1, 2, 3 and 4 mm respectively. Three-dimensional image model reconstruction using 3-D visualization medical software (V-works /sup TM/ 3.0) and RP model fabrications were followed. 2-RP models were 3D printing (Z402, Z Corp., Burlington, USA) and Stereolithographic Apparatus model. Linear measurements of anatomical landmarks on dry skull, 3-D image model, and 2-RP models were done and compared according to slice thickness and RP model type. Results: There were relative error percentage in absolute value of 0.97, 1.98,3.83 between linear measurements of dry skull and image models of 1, 2, 3 mm slice thickness respectively. There was relative error percentage in absolute value of 0.79 between linear measurements of dry skull and SLA model. There was relative error difference in absolute value of 2.52 between linear measurements of dry skull and 3D printing model. Conclusion: These results indicated that 3-dimensional image model of thin slice thickness and stereolithographic RP model showed relative high accuracy.