• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.834-848
• /
• 2013

To effectively use these functions many kinds of human-phone interface are used such as touch, voice, and gesture. However, the most important touch interface cannot be used in case of hand disabled person or busy both hands. Although eye tracking is a superb human-computer interface method, it has not been applied to smartphones because of the small screen size, the frequently changing geometric position between the user's face and phone screen, and the low resolution of the frontal cameras. In this paper, a new eye tracking method is proposed to act as a smartphone user interface. To maximize eye image resolution, a zoom lens and three infrared LEDs are adopted. Our proposed method has following novelties. Firstly, appropriate camera specification and image resolution are analyzed in order to smartphone based gaze tracking method. Secondly, facial movement is allowable in case of one eye region is included in image. Thirdly, the proposed method can be operated in case of both landscape and portrait screen modes. Fourthly, only two LED reflective positions are used in order to calculate gaze position on the basis of 2D geometric relation between reflective rectangle and screen. Fifthly, a prototype mock-up design module is made in order to confirm feasibility for applying to actual smart-phone. Experimental results showed that the gaze estimation error was about 31 pixels at a screen resolution of $480{\times}800$ and the average hit ratio of a $5{\times}4$ icon grid was 94.6%.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.91-108
• /
• 2006

RFID/USN is important infrastructure of the ubiquitous society. And so, It is various and practical research is attempted. These two base technology have physical characteristic and complement relationship. Like this relationship is applied Following example that is system research which manages warehouse stocks and conditions. First, We adhere RFID Tag at the Pallet of the warehouse and do identification goods. And then, It grasps the environment state information of stocks with sensor module which has Zigbee wireless communication function. From like this process RFID Tag information and jop-control command of sensor node also it is exposed to air. Therefore, We control sensor node in USN/RFID environment through the mobile device. And system design for the security Apply of the process is main purpose of this paper's. We propose the condition and function of the mobile device to the secondary. And We define the relation of the sensor node with RFID to be arranged to a warehouse. Finally, This paper is designed to find a trade-off of the following viewpoints. First, We offer suitable sensor-control information to a actual manager. Second, We offer RFID tag security approach to control the action of the sensor. Third, It increases the survivability of sensor node form.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.436-443
• /
• 1992

Presented in the paper is a systematic approach to constructing a Petri net model of FAS (flexible assembly system). Petri net is widely used in modeling automated manufacturing systems. But, it found to be very difficult for an FA engineer to build a correct model of an FAS with Petri net symbols (ie, place, transition, and token) from the beginning. An automated manufacturing system in general is built from a set of "standard" hardware components. An FAS in particular is usually composed of assembly robots, work tables, conveyor lines, buffer storages, part feeders, etc. In the proposed modeling scheme, each type of standard resources is represented as a standard "module" which is a sub Petri net. Then, the model of a FAS can be conveniently constructed using the predefined modules the same way the FAS itself is built from the standard components. The network representation of a FAS is termed a JR-net (job resource relation net) which is easy to construct. This JR net is then mechanically converted to a formal Petri net (to simulate the behavior of the FAS). The proposed modeling scheme may easily be extended to the modeling of other types of automated manufacturing systems such as FMS and AS/RS.ch as FMS and AS/RS.

• Archives of design research
• /
• v.16 no.2
• /
• pp.111-120
• /
• 2003

This paper shows a study on a design method and its process for personalization of the industrial fabricated products, and a unit construction system design as its result. Hence this study is starting at a point, the meaning of the personalization in the industrial society to make dear, the using process to analysis with a systematic approaching method and the system of the using process to define. The system of the using process is related in the functions of the industrial product. Therefore a unit which makes up the system of the using process is defined with the technical system theory of the industrial product, and then a design of the system that is made of that units is clarified as a open system. And the propriety and the boundary of the unit construction system design is cleared up by its practical experiment with the personal computer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.797-803
• /
• 2012

In this paper, for minimizing the real-time operating load losses of the power transformer, a SCADA optimum operating system was developed, and the economic analyses on the test operation were performed. Transformer loss DB which reflects the economic integration operation criteria was constructed by referring the transformer manufacturer's loss data(iron loss, copper loss). Based on the loss DB, each substation transformer real-time loss was calculated according to the size of the transformer loads, and if integration or separation transformer operating conditions minimizing the loss are met, then a window pops-up and the dispatcher performs the substation equipments operation according to the procedure provided by this system. With the existing SCADA main program, the relation database of the substation facilities and integration/separation operation algorithm were developed and applied to Auto MTR Processor and pconn Processor Task module. Seven stations test data for seven months were analyzed for the economic analyses, and the results showed that Cost-Benefit ratio was 2.64, and IRR(Internal Rate of Return), 36%, which asserted the economic justification of the proposed system.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.28-32
• /
• 2016

Background Congenital muscular torticollis (CMT) is a benign condition. With early diagnosis and appropriate management, it can be cured completely, leaving no residual deformity. However, long-standing, untreated CMT can lead to permanent craniofacial deformities and asymmetry.Methods Nineteen patients presented to the author with congenital muscular torticollis. Three dimensional computed tomography (3-D CT) scans was obtained upon patient’s admission. Adjustment of skull’s position to Frankfort horizontal plan was done. Cervical vertebral segmentation was done which allowed a 3D module to be separately created for each vertebra to detect any anatomical or positional changes.Results The segmented vertebrae showed an apparent anatomical changes, which were most noticeable at the level of the atlas and axis vertebrae. These changes decreased gradually till reaching the seventh cervical vertebra, which appeared to be normal in all patients. The changes in the atlas vertebra were mostly due to its intimate relation with the skull base, while the changes of the axis were the most significantConclusion Cervical vertebral segmentation is a reliable tool for isolation and studying cervical vertebral pathological changes of each vertebra separately. The accuracy of the procedures in addition to the availability of many software that can be used for segmentation will allow many surgeons to use segmentation of the vertebrae for diagnosis and even for preoperative simulation planning.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.4
• /
• pp.63-75
• /
• 2021

It is necessary to respond to rapid technological changes such as the 4th industrial revolution and digital transformation across industries. And, a change in the university education system is necessary in a crisis situation of universities due to the rapid decrease of the school-age population. This study is aimed at practical competency with the ability to apply intelligent information technology to their job fields based on a basic understanding of intelligent information technology rather than advanced competency centered on theory and research. Instead of presenting the curriculum system diagram so that it can be flexibly applied to the design and development of the curriculum for intelligent information technology, training modules according to job and level were presented. In relation to intelligent information technology, a questionnaire was conducted for college professors, and industry experts were conducted on the derived educational modules to reflect the opinions of the industry. Industry experts said that collaboration with PBL, Capstone, and industry is necessary to improve problem-solving and communication skills.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.8
• /
• pp.3942-3961
• /
• 2019

Recently, the models of deep super-resolution networks can successfully learn the non-linear mapping from the low-resolution inputs to high-resolution outputs. However, for large scaling factors, this approach has difficulties in learning the relation of low-resolution to high-resolution images, which lead to the poor restoration. In this paper, we propose Stage Generative Adversarial Networks (Stage-GAN) with semantic maps for image super-resolution (SR) in large scaling factors. We decompose the task of image super-resolution into a novel semantic map based reconstruction and refinement process. In the initial stage, the semantic maps based on the given low-resolution images can be generated by Stage-0 GAN. In the next stage, the generated semantic maps from Stage-0 and corresponding low-resolution images can be used to yield high-resolution images by Stage-1 GAN. In order to remove the reconstruction artifacts and blurs for high-resolution images, Stage-2 GAN based post-processing module is proposed in the last stage, which can reconstruct high-resolution images with photo-realistic details. Extensive experiments and comparisons with other SR methods demonstrate that our proposed method can restore photo-realistic images with visual improvements. For scale factor ${\times}8$, our method performs favorably against other methods in terms of gradients similarity.

• The Korean Journal of Pain
• /
• v.32 no.1
• /
• pp.22-29
• /
• 2019

Background: The aim of this study was to investigate the relationship between pain catastrophizing, acceptance, and quality of life in relation to chronic low back pain in Jakarta, the capital city of Indonesia. We also analyze the effect of personality in catastrophizing and acceptance. Methods: A total of 52 chronic low back pain patients were enrolled as participants from 2 hospitals in Jakarta (43 females, 9 males, mean age 54.38 years). Participants completed a set of self-reported questionnaires: the NEO Five Factor Inventory (NEO-FFI), Chronic Pain Acceptance Questionnaire-Revised (CPAQ-R), Pain Catastrophizing Scale (PCS), and Pain Discomfort Module (PDM). Results: This study showed that acceptance increased the patient's quality of life by giving physical relief from pain. In contrast, pain catastrophizing decreased the quality of life, and increased the patients' tendency to get frustrated, irritated, and anxious about the pain. From a personality perspective, the trait neuroticism may lead to a higher level of pain catastrophizing. Conclusions: This study showed that catastrophizing, compared with acceptance, had a greater impact on the patient's life by reducing its quality.

• Journal of KIISE:Software and Applications
• /
• v.35 no.9
• /
• pp.562-571
• /
• 2008

For the purpose of building domain ontology, this paper proposes a methodology for building core ontology first, and then enriching the core ontology with the concepts and relations in the domain thesaurus. First, the top-level concept taxonomy of the core ontology is built using domain dictionary and general domain thesaurus. Then, the concepts of the domain thesaurus are classified into top-level concepts in the core ontology, and relations between broader terms (BT) - narrower terms (NT) and related terms (RT) are classified into semantic relations defined for the core ontology. To classify concepts, a two-step approach is adopted, in which a frequency-based approach is complemented with a similarity-based approach. To classify relations, two techniques are applied: (i) for the case of insufficient training data, a rule-based module is for identifying isa relation out of non-isa ones; a pattern-based approach is for classifying non-taxonomic semantic relations from non-isa. (ii) For the case of sufficient training data, a maximum-entropy model is adopted in the feature-based classification, where k-NN approach is for noisy filtering of training data. A series of experiments show that performances of the proposed systems are quite promising and comparable to judgments by human experts.