• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.111-114
• /
• 2010

최근 전 세계적으로 환경문제에 대한 관심이 증가하면서 건축분야에서도 친환경을 위한 노력이 증가하고 있다. 본 논문은 BIM 모델에 근거하여 친환경 현장시공의 위험도 관리에 관한 연구를 하였다. 친환경건축은 지속가능한 발전을 위한 건축으로 3R(Reducing environment pollution, Reducing resource use and Reducing energy source use)표준에 도달해야 한다. BIM은 3D설계, 시공, 유지관리의 효율성 극대화를 위해 건축설계를 2D에서 3D로 전환하고 수량, 공정 및 각종 분석 등의 정보를 통합적으로 활용하는 기술이다. 그리고 4D는 3D기술에 시간을 추가한 것으로써, 3D 모델이나 4D모델에 기반을 두고 있으며, 원가관리, 계획관리, 설계 및 재료관리 등이 BIM 때문에 변화하고 확대하고 있다. 이를 통해 위험관리도를 분석할 수 있다. 본 논문은 먼저 세 분야(환경요소, 자원요소, 에너지요소)에서 친환경 시공의 위험요소를 분석하고 판별하는 방법을 소개한다. 현장에서 일어날 수 있는 위험 확인은 이 공사를 통해서 위험을 판별하고 위험특성도를 찾을 수 있다. 다음으로 친환경위험과 BIM의 관계를 분석한다. 요즘은 BIM이 많이 활용되어서 쉽게 BIM 모델의 데이터베이스를 이끌어 낼 수 있고, 위험을 미리 예방할 수 있으며 옮길 수도 있다. 친환경위험의 세 분야는 분석을 통해서 개별적으로 위험관리를 할 수 있다. 친환경건물은 에너지분야 비율이 비교적 많은데 현장시공의 친환경도 비슷하다. 따라서 위험을 미리 예방하여 에너지를 절약할 수 있다. 소프트웨어를 통해 공간과 에너지성능을 잘 알 수 있고, 사용될 에너지의 전체를 계산할 수 있고, 라이프 사이클 등을 미리 알 수 있다. 그래서 4D모델이나 5D모델을 이용하면서 시공인원이 잘 판별하면 위험을 예방하거나 옮길 수 있다. 특히 시공환경 분야, 시공소음, 수질 오염 등의 문제점을 분석할 수 있다. 친환경공사는 복잡하고, 시간주기도 길어서 자원과 에너지를 많이 소모하기 때문에 친환경위험관리에 적합한 판별이 필요하며, 이를 통해 지속 가능한 발전을 할 수 있다.

• 가정과삶의질연구
• /
• 제7권1호
• /
• pp.97-118
• /
• 1989

The purpose of this study is to clarify the definition of middle age, to compare the different perspectives about mid-life crisis, and to identify the variables that cause the mid-life crisis of men and women.. For this purpose reviewing literatures and emprical research were conducted. For the emprical research, Mid-life Crisis Scale, Mid-life Indentity Scale, Family Relation Scale. Health Scale and Religious Scale were developed. The Sample was selected form the men and women living in Seoul, whose age is from 40 to 59 , and whose last child is older than 13 years of age. Among 820 respondents 218 men and 442 women were finally selected as datum sources. The data were analyzed by the statistical method such as the factor analysis frequency distribution, percentile, ANOVA, Pearson's correlation and regression analysis. The main results were as follows; 1) Men and women experience mid-life crisis some extent. The mid-life crisis score for men is 33.60 and 35.0 for women. This implies women reveal significantly higher crisis than men. As for women's mid-life crisis. self-awaring age, education, income, husband's occupation, employment status of wife and occupational status of wife have a significant influence Expecially employment status of wife seemed to interact with sex, husband's occupation and educational level of wife. however status of child, family pattern, son's existence are not as important an influence on mid-life crisis. 3) Among the psychological variables, work identity and physical identity have the strong influence on the mid-life crisis of men and women, It implies that mid-life crisis si lower when one has higher work identity and physical identity. 4) Mid -life crisis of men and women is influenced significantly according to family relation variables and health variables. It reveals that the better one's family relations and health sate, the lower one's mid-life crisis is. However menopause and the years after menopause do not influence on the mid-life crisis of women. 5) Mid-life crisis of women differs significantly according to the kind of religion and religious activity. That is mid-life crisis of women is lower when she believes in Protestantism and Catholicism and participate in more religious activity. Mid-life crisis of men is not significantly influenced by religious variables. After all among the five categories of variables that related to mid-life crisis, psychological variables-especially work identity and physical identity are observed to have the strongest degree of significance.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제16권1호
• /
• pp.63-79
• /
• 2010

본 연구는 음주행동에 미치는 사회인지적 요인의 영향을 분석하기 위해 대학생 폭음 집단에서 음주와 음주 결과기대, 금주 자기효능감, 지각된 음주규준, 음주동기의 관계에 대해 알아보고자 하였다. 설문은 e-mail로 이루어졌으며, Wechsler(1992)의 폭음(binge drinking) 정의에 해당하는 남학생 148, 여학생 152명, 총 300명의 폭음집단을 대상으로 분석을 실시하였다. 폭음집단에서 음주정도와 음주동기, 지각된 음주규준 간의 유의미한 상관이 있었으나 비폭음집단에서는 지각된 음주규준이 음주정도와 관련이 없었다. 또한 폭음집단에서 남녀 모두 친한 친구의 음주정도를 과대추정하였으며, 지각된 동료음주 규준과의 차이가 개인의 음주정도와 유의하게 관련이 있음을 확인하였다. 하지만 보통의 대학생의 음주정도 추정과의 관련성에 있어서는 남녀에 따라 차이가 있었다. 아울러 회귀분석을 통해 알코올기대, 금주 효능감의 영향력을 통제한 후 지각된 음주규준이 음주정도에 미치는 영향력이 유의미함을 확인하였다. 또한 음주정도에 미치는 지각된 음주규준의 영향을 음주동기가 매개하는지를 검증한 결과, 지각된 음주동기는 음주규준과 음주정도를 부분 매개하는 것으로 나타났다. 이와 같은 연구결과를 토대로 본 연구의 임상적 의의와 제한점이 논의되었다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.233-241
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces strictly related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2004년도 ISMP Pb-free solders and the PCB technologies related to Pb-free solders
• /
• pp.211-219
• /
• 2004

A new alloy definition will be presented concerning increasing demands for the board level reliability of miniaturized interconnections. The damage mechanism for LFBGA components on different board finishes is not quite understood. Further demands from mobile phones are the drop test, characterizing interface performance of different package constructions in relation to decreased pad constructions and therefore interfaces. The paper discusses the characterization of interfaces based on SnPb, SnPbXYZ, SnAgCu and SnAgCuInNd ball materials and SnAgCuInNd as solder paste, the stability after accelerated tests and the description of modified interfaces stric시y related to the assembly conditions, dissolution behavior of finishes on board side and the influence of intermetallic formation. The type of intermetallic as well as the quantity of intermetallics are observed, primaliry the hardness, E modules describing the ability of strain/stress compensation. First results of board level reliability are presented after TCT-40/+150. Improvement steps from the ball formulation will be discussed in conjunction to the implementation of lead free materials. In order to optimize ball materials for area array devices accelareted aging conditions like TCTs were used to analyze the board level reliability of different ball materials for BGA, LFBGA, CSP, Flip Chip. The paper outlines lead-free ball analysis in comparison to conventional solder balls for BGA and chip size packages. The important points of interest are the description of processability related to existing ball attach procedures, requirements of interconnection properties and the knowledge gained the board level reliability. Both are the primary acceptance criteria for implementation. Knowledge about melting characteristic, surface tension depend on temperature and organic vehicles, wetting behavior, electrical conductivity, thermal conductivity, specific heat, mechanical strength, creep and relaxation properties, interactions to preferred finishes (minor impurities), intermetallic growth, content of IMC, brittleness depend on solved elements/IMC, fatigue resistance, damage mechanism, affinity against oxygen, reduction potential, decontamination efforts, endo-/exothermic reactions, diffusion properties related to finishes or bare materials, isothermal fatigue, thermo-cyclic fatigue, corrosion properties, lifetime prediction based on board level results, compatibility with rework/repair solders, rework temperatures of modified solders (Impurities, change in the melting point or range), compatibility to components and laminates.

• 농촌지도와개발
• /
• 제13권1호
• /
• pp.209-225
• /
• 2006

According to shift of the political focus from agricultural productivity to social development, it has been increased importance of local leader in rural society. Especially rural women leader's role has been increased not only in agricultural business but also in social activity of locality. Although a lot of leadership study related to rural community development, it has been very scarcely study about leader's action in pattern or doing in style based on psychological scale. Therefore this a kind of pilot study on that. For this data, it was gathered from 24 female farmer leaders of a federation group in 2005. In this study, to define the action in pattern or doing in style of leader, it was adopted to Ozasz Yoshihisa's scale which is consisted of 40 items into 8 types. From analysis of female farmer leader's action in pattern or doing in style, most of them were belong to volunteer type, generalist type, farmer type. This menas most of them were head toward maintenance of the present status, keeping one's balance, adaptation oneself to new environment, or acceptance the logic of events, not trying to innovate. But it was not clear that any variable has a relation in the action in pattern or the doing in style, for definition of variables, it should be more detailed study.

• 한국학교수학회논문집
• /
• 제20권4호
• /
• pp.495-519
• /
• 2017

본 연구에서는 실수 e의 다양한 의미와 맥락을 살펴보고, 실수 e에 대한 예비교사들의 이해 정도를 조사하였다. 먼저 실수 e의 역사적 발생과 수학적 의미를 살펴보았으며, 이를 바탕으로 검사지를 개발하여 예비교사 28명에게 적용하고, 그 중 8명에게 반성 및 탐구 활동을 수행하였다. 실수 e에 대한 예비교사들의 이해를 분석한 결과는 다음과 같다. 상당수의 예비교사들이 실수 e의 형식적 정의와 그 표현과의 관계를 인식하지 못하였으며, 실수 e의 표현을 극한 표현에 편중되어 이해하고 있었다. 실수 e의 무리수 속성과 작도 불가능성에 대해서는 대체적으로 적절한 판단을 내렸으나, 그 근거에서는 다소 미흡한 면모를 드러내었다. 또한 실수 e의 연속 복리 맥락과 지수함수 맥락에는 높은 이해도를 나타낸 반면에, 기하적 맥락과 자연로그 맥락을 미흡하게 이해하고 있음을 확인하였다. 향후 예비교사 프로그램의 개선 방향으로, 예비교사들에게 실수 e의 다양한 표현과 속성, 맥락에 대한 학습기회를 제공하고, 실수 e의 다양한 측면이 잘 조직된 관계망 속에서 통합 지도될 필요가 있음을 제시하였다.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1106-1114
• /
• 1993

본 연구에서는우수한 섬유강화 고분자복합판의 제조 및 개량을 섬유구조의 분리. 배향의 관점에서 연구한다. 유리섬유매트는 유리섬유를 50mm의 길이로 균일하 게 절단하여 공기중에서 분산시켜 6~7mm두께로 만들고,이 유리섬유매트를 바늘의 종류와 스트레칭 횟수에 따라 니들펀칭하여 유리섬유의 매트구조를 변화시킨다. 유리 섬유의 매트구조 별로 모재와 적층시킨 다음 열압축프레스를 사용하여 1차로 시이트를 제작하고, 이 제작된 시이트를 가열로로 가열하여 2차 고온압축 프레스성형한다. 이 때 섬유와 모재의 분리 및 배향의 상관관계를 나타내는 상관계수를 구하고, 이 계수에 미치는 매트 구조의 영향에 대한 실험결과를 보고한다.

• 복식
• /
• 제51권4호
• /
• pp.71-80
• /
• 2001

Since the beginning of the 90's, Fashion shows appear to be a type of performance form of art combining with other areas to visually entertain the viewers. This can be explained by the modern tendency to escape from society which requires formality and complicated lifestyles. Fashion shows take place in a scene Influenced by the idea of post-modernism which redefines the definition of space. A church, old factory, unoccupied ground, subway stations, or even place like a waste disposal are used as a setting. The stage set is no longer the T shape run way and the procinium arch has disappeared. The gap between audience and stage has diminished and theatrical element is added to the fashion performance by using viewers living and working environments as setting of the show. The human relation with machine based on the cutting edge technology such as the stage automation, robots and mist making sprinkler system introduces new elements with spontaneity and detailed planning in the stage performance. Music also plays an Important role in attracting viewers. The sound track covers house music to techno music. Instead of music being abstract, folks orchestral music, choirs, piano. even live concert performed by pop artist provide the liveliness of the fashion show. And the catwalk itself is a performance. Model needs to be well trained as the capable talent who can handle sensitive gestures, facial expressions, dancing and choreography. The improvisatorial interaction between audience and model lead to audience participation. Models now range from pop star, ordinary people, handicapped people, to elderly and so on. John Galliano introduced the theatrical factors for the fashion show and Alexander Mcqueen approached the fashion show as the visual art of communication. Hussein Chalayan utilized high technology skewing futurism as if in a magic show. Today the Fashion show tends to be a total performance which includes audience participation, impromptu, and that break the limitation that fashion shows previously had. This will lead the fashion industry in opening new horizon of its own.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.924-934
• /
• 2003

The aim of the present study was to measure intra-individual consistency in clothing style evaluation and to examine its relation to the ratings. For this study, a pilot test was conducted to 50 clothing majored university students to explore the stimulus of‘cute’,‘casual’,‘sexy’,‘elegant’,‘intelligent’,‘formal’,‘romantic’,‘individual’,‘refined’for the 9 each image styles from the 32 spring wears in fashion magazine$\boxDr$FARBE$\boxUl$(March, 2000). On the basis of the preliminary survey, the question items explored the 15 pairs of bipolar adjectives as seven-point Likert type. The main survey was preceded 94 female and 111 men of university students from March 13 to 24 in 2000, twice for 7-days interval. As a result of analyzing of correlation coefficients between the two ratings for each subjects, intra-individual consistency in the evaluation, ranged from -.11 to .87 and mean coefficient was .64 of female and .20 to .76 and mean coefficient was .57 of male. Female had higher intra-individual consistency in the evaluation than male. Based on the coefficients, the subjects were classified into three groups: high, medium, and low intra-individual consistency. Analysis of variance of mean ratings by the three groups revealed that significant difference existed in 42% of female and 25% of male in 135 combinations of 9 clothing and 15 semantic differential scales. There was an apparent tendency that subjects of female with high intra-individual consistency were mostly definitely to evaluate clothing, whereas the ones with low were least. But male shows opposit trend compare to each groups of female. The result of this study, it was found that female rated higher intra-individual consistency and definition in the two times evaluations than male and among the semantic differential scales'consistency differ depending on style and gender. It is believed that the result of this study is helpful clothing image evaluation, and clothing image selection tendency.