• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1212-1219
• /
• 2012

This study was to investigate the balancing and clinical abilities trunk muscle stabilization exercise and trunk muscle resistive exercise of stroke patients having surface changes in balance of body. The subjects of this study were 30 stroke patients(15 males and 15 females) that three times a week for 12 weeks at the same time point and with the same amount of exercise. They were separated into two groups and did reinforcing exercise on trunk muscle stabilization exercise and trunk muscle resistive exercise for three times a week for twelve weeks. It were measured balancing ability, they performed functional standing balance test, functional forward arm stretching test. performance-oriented mobility assessment, berg balance scale. The balancing exercises were modified from preceding studies and consisted of 6 difference exercises. The functional standing test with open and close eyes and performance-oriented mobility assessment, the trunk muscle stabilization exercise group and the trunk muscle resistive exercise group improved significantly. The forward arm stretching was test the trunk muscle stabilization exercise group more improved. This study found that the balancing exercise on trunk muscle stabilization exercise was more effective than trunk muscle resistive exercise for stroke patients. Thus, trunk muscle stabilization exercise has more positive effects on the improvement of balancing abilities of stroke patients.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.3
• /
• pp.275-283
• /
• 2012

Nitrite-type hydrocalumite (calumite) is a material that can adsorb the chloride ions ($Cl^-$)that cause the corrosion of reinforcing bars and liberate the nitrite ions ($NO_2{^-}$) that inhibit corrosion in reinforced concrete, and can provide a self-corrosion inhibition function to the reinforced concrete. In this study, VA/E/MMA-modified mortars with calumite were prepared with various calumite contents and polymer binder-ratios, and tested for corrosion inhibition, chloride ion penetration, carbonation and drying shrinkage. As a result, regardless of polymer-binder ratio, the replacement of ordinary Portland cement with hydrocalumite has a marked effect on the corrosion inhibiting property of the polymer-modified mortars. However, chloride ion penetration and carbonation depths are somewhat increased with higher calumite content, but can be remarkably decreased depending on the polymer-binder ratios. The 28-d drying shrinkage shows a tendency to increase with the polymer-binder ratio and calumite content. VA/E/MMA-Modified mortars with 10 % calumite did not satisfy KS requirements. Accordingly, a calumite content of 5 % is recommended for the VA/E/MMA-modified mortars with calumite.

• Journal of Periodontal and Implant Science
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2003

Hydroxyapatite(HA) has been extensively used as bone graft materials and tooth implant surface coating materials because of its biocompatibility and osteoconductive properties. However, as HA is intrinsically poor in mechanical properties, zirconia($ZrO_2$) was incorporated with HA as reinforcing phases for improvement of mechanical properties. The purpose of this study was to investigate the biological activities of HA-coated zirconia through the cell proliferation test, measurements of alkaline phosphatase activity, and histologic examination. Four kinds of tested blocks were prepared according to the pore size (300-500${\mu}m$/500-700${\mu}m$) and the porosity (70%/90%). Cell proliferation and alkaline phosphatase activity was measured at 1, 7, 14 days. The number of cells proliferate after 7, 14 days were significantly increased in all groups when compared with that of the first day, but there was no significant difference between the 4 groups at each time period. At the 7 day, alkaline phosphatase activities of cells cultured in 4 groups were higher than that of the first day, but there was no significant difference between the 4 groups at each time period. The human gingival fibroblast and MG 63 cell was used to evaluate the cell cytotoxicity using MTT test. The materials tested in the current study turned out to be non-cytotoxic. In histologic examination(SEM), at 1 day there were many cells attached on the surfaces of all kinds of tested blocks. The number of cells were increased over time. At the 14 day, there were more cells proliferated than 1 day and some of the pores of blocks were partially filled with the proliferated cells. The in vitro response of osteoblast-like cells to the HA-coated zirconia showed comparable effect on transformation comparable to hydroxyapatite.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.749-757
• /
• 2006

Many losses of life and extensive damage of social infrastructures have occurred due to moderate and strong earthquakes all over the world. In this research various design parameters have been evaluated to develop a rational seismic design code of rectangular reinforced concrete(RC) bridge piers. It was confirmed from this study that the axial force ratio and longitudinal steel ratio were most influencing design parameters on the seismic displacement ductility from experimental results of 54 rectangular RC bridge piers, which were tested at domestic and foregin countries. However, these important parameters are not considered in the confinement steel ratio of Korea Highway Bridge Design Specification(KHBDS). The objective of this study is to propose a rational design provision for the transverse reinforcement of rectangular RC bridge piers. New confinement steel ratio is proposed by reflecting the effect of the axial force and longitudinal steel into the current code of KHBDS. furthermore, minimum transverse confinement steel ratio is also proposed to avoid a probable buckling of longitudinal reinforcing steels of RC bridge piers with a relatively low axial force. New practical code can alleviate the rebar congestion in the plastic hinge region of RC bridge pier, which contributes to construct RC bridge piers in a simple and economic way.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3A
• /
• pp.215-225
• /
• 2011

In general, the precast columns can obtain its homogeneous quality as they are produced in a factory with a hollow concrete block type by using high strength concrete, so that they can generate the reduction of dead load. Such a method of precast hollow concrete columns is already implemented in USA and Japan and used for connecting between blocks which use PC tendons. However, it is inevitable to have uneconomical construction with excessive cost in early stage when PC tendons are used. This study aims to develop an economical precast column with high quality and constructability which consists of only splice sleeve and general reinforcing bar without using PC tendons in order to reduce the construction period and cost. To achieve this goal, this study tested the performance of total 5 minimized models in the experiment with the variables such as hollowness, diameter of main reinforcement bar and cross-sectional size for the cross section of precast column by using grouting type splice sleeve which is a new type joint rebar. And it also verified the performance of column in the experiment for a large-sized model in order to overview its applicability by excluding large scale effect.

• Information Systems Review
• /
• v.11 no.2
• /
• pp.183-207
• /
• 2009

In general, the introduction of information technology to domestic small and middle size firms is depending on the governmental supporting policy. However, even under this situation there is also a case that the building up of information technology is initiated by the management of small and middle size firms. An accumulated know-how for information technology and powerful leadership in such firms are considered as success factors. This study attempts to analyze a case for 'THEFACESHOP', in which MIS is successfully built. To achieve corporate goals, the CEO of THEFACESHOP based on the extensive knowledge of information technology drove to build up information system. Also, the board of directors supported him, and employees committed to their organization. Through the strong leadership of the CEO, the information system of THEFACESHOP became sufficient and efficient. And it led the organization and the information system to be competitive. In particular, the systematic approach of THEF ACESHOP reinforcing its competitiveness can be summarized as follows: First, it tried to construct basic information systems as like ERP etc. to increase work-efficiency. Second, it completed CRM related systems for analysis to maximize its customer orientation and marketing effect. Third, the last step can be stated as the building up of operation related CRM systems to improve the responsiveness of target marketing activities and the profitability of its agencies. Such endeavors of THEFACESHOP contributed to increase productivity and performance of the organization. As a result, THEFACESHOP has had its own 'Natural Story' and price competitiveness. For that reason THEFACESHOP became the best of brand-shop cosmetic firms. This success based on the strong leadership and the systematic investment on the information system.

• Korean Journal of Adult Nursing
• /
• v.13 no.1
• /
• pp.108-122
• /
• 2001

The cause of essential hypertension is yet unknown, but in general is caused by interaction of hereditary factors, diet, obesity, lack of exercise and stress. The aging process influences various physiological mechanism related to regulation of blood pressure. So elderly hypertensives have a tendancy to consider the disease as a result of the physiological aging process. This attitude causes many complications, worsening of the disease and even early death because of inappropriate care. In order to improve self-management of elderly hypertensives in this study the researcher examined the effect of blood pressure regulation by an education program that improves self-care behavior, through increasing self-efficacy. The education program consisted of group education on hypertension and self-care strategies, and encouraging and reinforcing self-efficacy resources such as verbal persuation, performance accomplishment and vicarious experiences. A quasi-experimental pre-and post-test design was used. Thirty-two elderly hypertensives participated in the study. Eighteen in the education group and fourteen in the control group. The education program consisted of eight sessions twice a week for four weeks. There was no intervention for the control group. Data were analysed using SPSS for Windows(Version 8.0). The results were as follows. 1. There was a significant decrease in systolic and diastolic blood pressure between the experimental group and control group over three different times, and interaction by groups and over time. 2. There was no significant difference in the level of self-care behavior between the experimental group and control group over three different times, and interaction by groups and over time. 3. There was significant difference in selfefficacy of experimental and control group, depending on the measuring period, but there was no difference between these groups on interaction by groups and over time. 4. There was positive correlation between self efficacy and self care behavior depending on the measuring period. There was negative correlation between diastolic blood pressure and self-care behavior on the posttest of the program, and between systolic blood pressure and self-care behavior on the follow-up test of the program. Findings indicate that this study will contribute to develop nursing strategies for the regulation of blood pressure for the elderly, which is easy for the elderly to learn as a nonpharmacologic approach.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.305-311
• /
• 2013

PLA(polylactic acid), one of biodegradable polymers was blended with various amounts of wood pulp powder through solution blending technic to verify the effect of reinforcing pulp amount on the mechanical properties of blend films. Also these blend films were further modified with TDI(toluene diisocyanate) as crosslinking agent to introduce urethane functions by reaction of pulp hydroxyl groups and isocyanate. As a result, the tensile strength of blend film with 0.25 wt% pulp was increased from $565.25kg_f/cm^2$ for PLA film itself to $624.20kg_f/cm^2$. However, elongation of this film was decreased by 50% of that of PLA film itself. Only PLA/pulp blend film further modified with 500% of TDI/0.25 wt% pulp showed the slightly increased tensile strength but decreased elongation. Melting point and glass transition temperature of PLA/pulp blend films were confirmed by using Differential Scanning Calorimeter(DSC). Thermal stability of these blend films measured by TGA showed only a slight increase at temperature lower than $300^{\circ}C$.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.161-168
• /
• 2009

In an architectural construction, underground construction is a critical path forming a major part of the total construction period and cost, and particularly in big cities, its size has been increasing every year. A basement wall currently constructed in the field needs a large functional work force, and the construction is under progress by the Euroform and Soldier system, which is disadvantageous in terms of the construction period. Therefore, in this research, non-supporting forms which are applicable to the buildings construction were developed, based on the non-supporting forms partly used in some civil engineering works. In addition, the size of a form was assumed and its economical efficiency was compared to that of the Euroform and Soldier system which is used most in construction fields, and the results were analyzed. The study results showed that the construction cost of composite non-supporting forms was higher than that of the Euroform and Soldier system by about 8%, and the construction cost of non-composite non-supporting forms were lower than that of the Euroform and Soldier system by about 9%. However, in the case of composite non-supporting forms, the amount of concrete and reinforcing rods remarkably decreased in structural construction, so it has the effect of an economical cost reduction compared to the construction cost of existing walls by about 35%

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.617-624
• /
• 2010

This paper reports on a comprehensive study on the mechanical properties of expansive fiber-reinforced strainhardening cement composite (SHCC) materials containing various replacement levels (0, 8, 10, 12 and 14%) of an expansive admixture and 1.5% polyethylene (PE) fibers volume fraction. A number of experimental tests were conducted to investigate shrinkage, compressive strength, flexural strength, and direct tension behavior. Test results show that as expected, the different replacement levels of an expansive admixture have an important effect on the evolution of the free shrinkage of SHCC with a rich mixture. At the volume fraction of 1.5%, PE fibers in normal SHCC reduce free shrinkage deformation by about 30% in comparison to plain mortar. The replacement of an expansive admixture in SHCC material has led the SHCC to a better initial cracking behavior. Enhanced cracking tendency improved mechanical properties of SHCC materials with rich mixtures. Note that an increase in the replacement of expansive admixture from 10% to 14% does not lead to a significant improvement for mechanical properties; this implies that the replacement of 10% expansive admixture is sufficient.