• 제목/요약/키워드: reinforced laminated wooden pin

검색결과 4건 처리시간 0.021초

GFRP보강적층목재핀의 휨강도 및 인장형 전단내력 성능평가 (Performance Evaluation for Bending Strength and Tensile Type Shear Strength of GFRP Reinforced Laminated Wooden Pin)

  • 송요진;정홍주;김대길;김상일;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제42권3호
    • /
    • pp.258-265
    • /
    • 2014
  • 목구조물 접합부에 기존 드리프트핀(Drift pin)을 대체하고자 단판이나 합판을 유리섬유강화플라스틱(GFRP: Glass fiber reinforced plastic)과 복합 적층시킨 GFRP보강적층목재핀을 제작하였다. 더불어 GFRP보강적층목재핀을 사용하여 집성재 접합부의 인장형 전단내력 시험을 실시하였다. GFRP 배열에 따른 보강적층목재핀의 휨강도 시험결과 GFRP를 각층에 1장씩 삽입한 시험편(Type-A)이 가장 양호한 성능을 발휘하였다. 또한 압체압력 $1.96N/mm^2$, 온도 $150^{\circ}C$에서 한 시간 열압하여 고밀화한 시험편이 고밀화하지 않은 시험편과 비교하여 휨강도 성능이 1.57배 향상됨을 확인하였으며, 하중방향에 따라 Edgewise가 Flatwise보다 3.51배 높은 성능을 발휘하였다. 시험을 통해 가장 양호한 성능을 보인 Type-A 보강적층목재핀을 이용하여 전단내력 시험을 실시하였다. 접합구의 종류와 접합판의 종류를 달리하여 시험한 결과 드리프트핀과 강판을 적용한 시험체(Type-DS)와 비교하여 GFRP보강적층목재핀과 GFRP보강목재적층판을 적용한 시험체(Type-WL)가 1.12배 높은 전단내력이 측정되었으며 최대하중 이후에도 매우 양호한 인성이 관찰되었다.

GFRP적층판을 활용한 보강보부재와 원통형 단판적층기둥재 접합부의 내력 성능평가 (Structural Performance of Joints for Partial Reinforced Beam Using GFRP Laminated Plate and Cylindrical Reinforced LVL Column)

  • 송요진;정홍주;이정재;서진석;박상범;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제42권3호
    • /
    • pp.282-289
    • /
    • 2014
  • 합판과 유리섬유강화플라스틱을 조합하여 적층 후 $1.96N/mm^2$의 압력으로 $150^{\circ}C$에서 1시간 고밀화시킨 유리섬유 강화플라스틱 적층판을 제작하였다. 제작된 5가지의 유리섬유강화플라스틱 적층판을 각각 기둥재와 접하는 집성재에 부착하여 부분보강보부재를 제작하였다. 더불어 합판과 시트형 유리섬유강화플라스틱을 적층한 보강적층목재핀과 유리섬유로 보강한 원통형 단판적층기둥재로 기둥-보 접합부를 제작하였다. 기준시험편으로는 원주목과 집성재로 제작한 보부재, 드리프트핀을 사용한 접합부를 제작하여 모멘트 저항 내력을 평가하였다. 시험결과 기준시험편과 비교하여 부분보강보부재를 사용한 시험체들이 평균 1.8배 높은 내력성능이 측정되었다. 모든 부분보강보부재와 원통형 단판적층기둥재에는 파단이 발생하지 않았으며 접합부의 인성과 강성이 모두 양호하게 측정되었다. 부분보강보부재의 보강효과는 시트형 유리섬유강화플라스틱이 직물형 유리섬유강화플라스틱으로 보강한 적층판보다 양호한 보강효과를 보였으며, 시트형 유리섬유강화플라스틱을 각층에 삽입한 적층판이 접합내력과 변형각 모두 양호하여 보부재의 부분보강에 적합한 것을 확인하였다.

보강목질적층판이 사용된 집성재 접합부의 모멘트 저항성능 평가 (Evaluation of The Moment Resistance of Reinforced Wooden Gusset to Glulam Joint)

  • 이인환;송요진;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권1호
    • /
    • pp.53-61
    • /
    • 2017
  • 본 연구에서는 고강성, 고인성의 경량화된 목질접합부를 제작하기 위하여 슬릿 가공된 기둥부재 중앙에 강판 대용인 목질접합물을 삽입하고 기둥부재와 목질접합물만 결합된 시험편들을 제작하였다. 시험편들은 강판을 사용한 대조군 시험편과 모멘트 저항성능을 비교분석하였다. GFRP보강목질적층판과 핀으로 제작된 시험편들은 강판삽입형 시험편 보다 평균 24% 저하된 최대모멘트가 측정되었으나 양호한 인성이 관찰되었다. 파괴형상은 기둥부재의 연단부분에서 연륜을 따라 파괴되었다. 집성재와 목질적층판을 접착제로 일체화한 강절형 시험편은 대조군 시험편보다 초기강성이 2.8배 향상되었고, 최대모멘트도 평균 40% 향상된 경향을 보였다. 강절형 시험편들은 접착층 주위에서 파단되었다.

Evaluation of The Moment Resistance Joint Strength of Larch Glulam Using Glass Fiber Reinforced Wood Plate

  • Song, Yo-Jin;Jung, Hong-Ju;Park, Hyun-Ho;Lee, Hak-Young;Hong, Soon-Il
    • Journal of the Korean Wood Science and Technology
    • /
    • 제42권5호
    • /
    • pp.571-578
    • /
    • 2014
  • As a way of developing wooden joint development, a glass fiber reinforced wood plate was manufactured to replace a steel plate. Also, the fracture toughness was evaluated. Through application to a cantilever-type specimen made of a column and a beam, the moment resistance performance was evaluated. For the fracture toughness specimen of the wood plate, 12 types were manufactured by varying the combination of a main member (veneer and plywood) and reinforcement (glass fiber sheet and glass fiber cloth). The results of the fracture toughness test indicated that the 5% yield load of the specimen using plywood was 18% higher than that of the specimen using veneer, and that the specimen reinforced by inserting glass fiber sheets between testing materials (Type-3-PS) had the highest average 5% yield load 4841 N. Thus, a moment resistance strength test was performed by applying Type-3-PS to a column-beam joint. The results of the test indicated that compared to the specimen using a steel plate and a drift pin (Type-A), the maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a drift pin (Type-B) was 0.79; and that a rupture occurred in the wood plate due to high stiffness of the drift pin. The maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a glass fiber reinforced wooden laminated pin (Type-C) was 0.67, which showed low performance. However, unlike Type-A, a ductile fracture occurred on Type-C, and the load gradually decreased even after the maximum moment.