• 한국정보처리학회논문지
• /
• 제6권8호
• /
• pp.2222-2232
• /
• 1999

본 논문에서는 영상의 경계선 검출을 하는 시스톨릭 어레이를 제안하였다. 영상을 실시간 처리하는 것은 국부적인 연산자의 많은 연산으로 인하여 많은 어려움이 따른다. 경계선 검출을 위한 국부적 연산자는 한 화소의 이웃해 있는 다른 화소를 이용하여 경계선을 검출하는 데에 이용되나 기존의 컴퓨터에서는 빈번한 입출력의 요구로 인하여 실시간 처리에서 요구하는 계산능력을 충분하게 제공하지 못한다. 그래서 이 논문에서는 처리 방법이 규칙적이고, 보통의 대역폭을 가지고 있으면서도 경계선 검출이나 라플라시안 처리에 적합한 시스톨릭 어레이를 제안하였다.

• 한국연초학회지
• /
• 제11권1호
• /
• pp.71-77
• /
• 1989

The filling effects of test cigarettes prepared the different cutting width on the three brands (NC82, Burley21 and 88Light) were compared with their regular cigarette by the value of "Hardness" and "draw ressistance". Results obtained were as follows: 1. With enlargement of the shred width. The hardness of cigarettes became harder than the standard one in the same filling-weight When the shred width enlarged by 0.2mn from standard, the saving rate of tobacco materials would be 4~5%. 2. As the shred width became wider, Long strand was rich and short strand was poor. 3. The enlargement of the shred width may increase the standard deviation of filling-weight of cigarettes in some case.rettes in some case.

• Earthquakes and Structures
• /
• 제1권3호
• /
• pp.307-326
• /
• 2010

This paper is concerned with the optimal seismic design of added viscous dampers in yielding plane frames. The total added damping is minimized for allowable values of local performance indices under the excitation of an ensemble of ground motions in both regular and irregular structures. The local performance indices are taken as the maximal inter-story drift of each story and/or the normalized hysteretic energy dissipated at each of the plastic hinges. Gradients of the constraints with respect to the design variables (damping coefficients) are derived, via optimal control theory, to enable an efficient first order optimization scheme to be used for the solution of the problem. An example of a ten story three bay frame is presented. This example reveals the following 'fully stressed characteristics' of the optimal solution: damping is assigned only to stories for which the local performance index has reached the allowable value. This may enable the application of efficient and practical analysis/redesign type methods for the optimal design of viscous dampers in yielding plane frames.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제25권3호
• /
• pp.77-100
• /
• 1987

Let G : R$^n$${\times}$R\longrightarrowR$^n$ be defined by a Homotopy solving a system F($\chi$)=0 of nonlinear equations. For the vector v$\^$k/ with G'(u$\sub$k/)v$\^$k/=0, ∥v$\^$k/∥=1 where uk is one point in Zero Curve let u$\sub$0/$\^$k/=v$\^$k/＋$\tau$v$\^$k/ be the first prediction for the next point u$\^$k+1/, $\tau$$\in$(0, 1). When u$\sub$0/$\^$k/ approaching too losely to some unwanted point. to follow the Zero Curve may occur the returning or cycling. One lion for it is discussed and tile parametrizied Homotopy algorithm for solving F($\chi$)=0 with it been established. Also some theorems by means of the regular value have been discussed for Zero Curves of G(u)=0 and some theorems for algorithm have been obtained.

• 대한조선학회지
• /
• 제17권2호
• /
• pp.17-20
• /
• 1980

The shearing forces and bending moments acting on the tanker model[1] of $C_B$ 0.82 in regular oblique waves of shallow water are investigated by numerical calculations. The new strip method was adopted. It is concluded that in the shallow water shearing forces and the bending moments acting on the tanker model are higher than those of deep water waves by the present numerical investigations. The wave bending moment at the midship section is roughly twice of deep water value in the shallow of H/T less than 2. in this calculation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.521-526
• /
• 1997

The Spin Tester(High Speed Balancing and Overspeed Test Facility), which is designed for the quality control of turbine, generator, and rotors was supposed to be constructed with the use of Steel Fiber Reinforced Concrete(SERC) for reducing the risk of accident while operation. However, it was very existence of fiber concrete due to there are two major concern in the SFRC work: one is existence of fiber ball due to inhomogeneous mixing, the other is the segregation of the concrete materials. To avoid these possible problems, the S/a was controlled about 55% to reduce the segregation and the high range AE water reducing agent was used to maintain the slump over the value of 18cm. With these careful consideratons, the SFRC work was done successfully by only using regular equipments like pump car and vibrator.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.129-137
• /
• 1999

The time of the onset of double-diffusive convection in time-dependent, nonlinear concentration fields is investigated theoretically. The initially quiescent horizontal fluid layer with a uniform temperature gradient experiences a sudden concentration change from below, but its stable thermal stratification affects concentration effects in such way to invoke convective motion. The related stability analysis, including Soret effect, is conducted on the basis of the propagation theory. Under the linear stability theory the concentration penetration depth is used as a length scaling factor, and the similarity transform for the linearized perturbation equations. The newlly obtained stability equations are solved numerically. The resulting critical time to mark the onset of regular cells are obtained as a function of the thermal Rayleigh number, the solute Rayleigh number, and the Soret effect coefficient. For a certain value of the Soret effect coefficient, the stable thermal gradient promote double-diffusive convective motion.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1963-1966
• /
• 2007

Carbosilane dendrimers with silafluorenyl groups on the periphery were prepared by the reaction of 2,2'- dilithiumbiphenyl and dichlorosilyl groups on the carbosilane dendrimers at low temperature. The 1st to 4th generation of dendrimers with silafluorenyl groups were obtained with high yields and the products were purified by column chromatography. The unified properties of the dendrimers were measured by gel permeation chromatography (GPC) and displayed very low and regular polydispersity index (PDI) value. The silafluorenyl moieties on dendritic periphery accepted the potassium fluoride ions which were stabilized by criptand [222], and it proved strong photoluminescent properties.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.107-114
• /
• 2002

This paper deals with the non-linear analysis of cantilever beams with constant volume. Numerical methods are developed for solving the elastica of cantilever ben subjected to a tip Point load and a tip couple. The linear, parabolic and sinusoidal tapers with the regular polygon cross-section are considered, whose material volume and span length are always held constant. The Runge-Kutta and Regula-Falsi methods, respectively, are used to integrate the governing differential equations and to compute the unknown value of the tip deflection. The numerical results obtained herein are shown in tables and figures. Also the shapes of strongest beams are determined by reading the minimum values form the deflection versus section ratio curves.

• 기술사
• /
• 제35권5호
• /
• pp.78-84
• /
• 2002

From designers' viewpoint, today, the major environmental change can be found in the digital environment. Especially, more than the development of physical product which can be characterized as the backup of old function and realization of new function in the field of product design, as the digital product development of program style that exists without substance is deepened, the development of the digital design media has been accelerating. However, it is the recent matter that the link with educational system about the added value which could be embodied by digitech, and the interdisciplinary research about producing goods become regular. The construction of the industrial design development process based on the digital environment must be the major research object. Therefore, the goal of my research is to present the concept of the product design process model required in the digital environment.