• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1172-1175
• /
• 2007

We have investigated the threshold voltage shifts(${\Delta}Vth$) and drain current level shift (${\Delta}Ids$) in subthreshold region of a-Si:H TFTs induced by DC Bias (Vgs and Vds) - Temperature stress (BTS) condition. We plotted the transfer curves and the ${\Delta}Vth$ contour maps as Vds-Vds stress bias and Temperature to examine the severe damage cases on TFTs. Also, by drawing out the time-dependent transfer curve (Ids-Vgs) in the region of $10^{-8}\;{\sim}\;10^{-13}$ (A) current level, we can estimate the failure time of TFTs in a operating condition.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2487-2489
• /
• 1999

This paper proposes a wide speed range sensorless vector control strategy. At low speed region, the difference of high frequency impedances is used in order to estimate the rotor flux angle. At high speed region this algorithm is combined with the adaptive observer. It enables the stable operation even at zero speed under the rated load condition This is verified by experimental results.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.1
• /
• pp.40-44
• /
• 2013

This paper presents a design and characteristics analysis of novel 2-phase 4/3 switched reluctance motor (SRM) with short flux path for an air-blower application. The desired air-blower is unidirectional application, and requires a wide positive torque region without torque dead-zone. In order to get a wide positive torque region without torque dead-zone during phase commutation, asymmetric inductance characteristic with non-uniform air-gap is considered. The proposed motor could be started at any rotor position with high efficiency drive. The proposed 2-phase 4/3 SRM is verified by finite element method analysis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.161-162
• /
• 2000

We propose multi-layer aspheric lenticular lens for rear projection screen to provide wide viewing angle. Each pitch of lenticular lens sheet is divided by three region and image light from projection optical system is propagated widely on each region due to different focal point. Besides, to improve vertical viewing angle of screen, we propose glass bead embedded screen on observer side of lenticular lens.

• YAKHAK HOEJI
• /
• v.49 no.3
• /
• pp.205-211
• /
• 2005

The 3' UTR (3' untranslated region) plays important roles in controlling gene expression through regulating 3' polyadenylation, mRNA export, subcellular localization, translational efficiency, and mRNA stability. Changes in the 3' UTR sequence in an expressed transcript can result in functional changes of the genes that are expressed in pathological conditions compared with those genes expressed in normal physiologic conditions. A genome-wide survey of 3' UTR variation was performed for the genes expressed during hematopoietic differentiation from CD34+ stem/progenitor cells to CD 15 + myeloid progenitor cells. Wide-spread differential usage of the 3' UTR was observed from the genes expressed during this cellular transition. This study implies that the 3' UTR can be a highly coordinated region for post-transcriptional regulation of the function of expressed genes.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.274-281
• /
• 2012

This paper discusses the issues associated with the design of high speed machines for applications with a wide constant-power region requirement. Using described multi-domain design environments which put equal weight on the electromagnetic, thermal and mechanical considerations, the suitability and power density achievable using Induction Machines (IM) and Permanent Magnet Synchronous Machines (PMSM) are compared.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.4
• /
• pp.667-680
• /
• 1995

튜브 내의 입구영역에서 난류 유동에 의한 대류와 비회복사(non-gray radiation)가 동시에 일어날 때의 열전달특성을 수치해석적으로 연구하였다. 작동유체는 이산화탄소, 수증기, 질소의 혼합가스라고 가정하였다. 지배방정식을 계산하기 위해 유한차분법이 이용되었고, 복사전달방정식을 이차편미분방정식으로 바꾸기 위해 P-1 근사법이 사용되었다. 그리고 혼합가스의 비회흡수계수(non-gray absorption coefficient)는 지수광폭밴드모형(exponential wide band model)을 이용해서 구하였다. 열전달특성에 대한 온도조건의 영향을 조사하기 위해 튜브의 축방향에 대한 평균 온도와 뉴셀트수(Nusselt number)의 변화를 몇 가지 다른 온도조건에 대해 나타내었다. 또한, 가스의 성분조성에 대한 영향을 조사하였으며, 이러한 결과에 기초해서 튜브 내에서 난류유동에 의한 대류와 비화복사가 동시에 일어날 때의 복사 뉴셀트수를 쉽게 예측할 수 있는 방법을 제시하였다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.75-76
• /
• 2016

This paper proposes a power factor correction circuit with a high efficiency over a wide load range characteristics for a communication power supply. And the characteristic verification is applied to produce a design of prototype. Power factor correction circuit can reduce conduction losses by applying Bridgeless Boost Converter for efficiency. Over a wide load range to maintain the efficient, the control method of a PWM controller is divided by two sections according to the load area. In the low-load region, it was reduced switching losses by applying the critical conduction mode control method. On the other hand, in the heavy-load area, the hysteresis current control method is used to maintain the high efficiency over a wide load range by limiting the peak noise of the inductor.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.19 no.1
• /
• pp.89-111
• /
• 2008

This study intends to research model to nation-wide Library Cooperative System in Korea and to make legal and institutional devices. For this purpose, it analyzes and investigate theories, types and model of Library Cooperation; and current status and problems in operations of major Cooperative System in all library types. The results developed new model of national wide Cooperative System on the basis of region Cooperative System.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.665-673
• /
• 2017

This paper proposes a field weakening control method for operating an induction motor with a variable DC input voltage condition. In the variable DC voltage condition such as a battery, the field weakening method are required for the maximum output power. The conventional field weakening control methods can be used for operating the induction motor over the rated speed in a constant DC-link voltage condition. However, the conventional methods for operating the motor with the variable DC voltage is not suitable for the maximum output power. To overcome this problem, this paper proposes the optimized field weakening control method to extend the operating range of the induction motor with a rated power in a limited thermal and a wide DC input voltage conditions. The optimized d-axis and q-axis current equations are derived according to the field weakening region I and II to extend the operating region. The experimental results are presented to verify the effectiveness of the proposed method.