• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.777-780
• /
• 2003

In this paper, an improved full wave mode ZVT-PWM DC-DC Converter is presented to maximize the regeneration ratio of resonant energy by only putting an additional diode in series with auxiliary switch. The operation of auxiliary switch in a half wave mode makes possible the soft switching condition of all switches. Furthermore, the increase of the regeneration ratio to resonant energy results in low conduction losses and minimum voltage and current stresses. The operation principles of the proposed converters are analyzed using the PWM boost converter topology as an example. Theoretically analysis and experimental results verify the validity of the boost converter topology with the proposed full wave mode ZVT-PWM converters

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.341-344
• /
• 2008

Computational studies have been performed to analyze the particle loadings onto the filters according to the different inflow pattern of dusty gas and the flow uniformities on the filter surface of back-blown gas at different permeability of porous media setup at the filter outlet. This is preliminary study to find how we can reduce the regeneration time and improve the regeneration efficiency of filters with dust layer.

• 동력기계공학회지
• /
• 제20권3호
• /
• pp.36-42
• /
• 2016

A cylinder control system of the conventional construction machine has been controlled by hydraulic spool valves. This system is low-cost but system efficiency is not high. Recently, to improve this, all valves are controlled electronically and independently. Bu and Yao suggested four way electronic hydraulic control valve system. It is called IMVT(Independent Metering Valve Technology). The purpose of the study is to find proper IMV pressure control method for excavator and to validate excavator's bucket regeneration energy effect by controlling the IMV system. In this paper, we mathematically describe the bucket system of excavator first. And then, based on these results, we design the control system which is divided into two operations(none regeneration or regeneration).The results of the experiment show the desirable performance and usefulness of the designed control system.

• 조명전기설비학회논문지
• /
• 제24권9호
• /
• pp.79-84
• /
• 2010

This paper discusses the control of generator field using dual IGBT PWM regeneration method to target brushless synchronous generator. If one of PWM bridges happens to fault, it transfers automatically and can be in charge of full load. Also it has an advantage of the operation which UPS connected in parallel with PWM bridge can supply power to excitation system in condition of main power loss. This PWM system supplies field current to generator in one quadrature operation, regenerates field coil energy to main power supplier in four quadrature operation. We designed, manufactured and applied the first trial product at J-power plant.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.104-109
• /
• 2004

Recently, when electric traction system used DC 1500[Vdc] runs on decline of rail road track and slows down, dc voltage goes beyond regular voltage. In this case extra power is forcibly wasted by resister because rectifier of substation and electric train including power converter and so on are out of order. Therefore this paper proposes that the extra power is regenerated through regeneration inverter to AC utility in result this system obstruct to go beyond regular voltage and improve the efficiency. In addition, electric traction system products harmonic current and voltage distortion and reactive power because power converter is used so regeneration inverter normally runs such as active power filter(APF) for improving power quality.

• 드라이브 ㆍ 컨트롤
• /
• 제7권2호
• /
• pp.25-32
• /
• 2010

• 드라이브 ㆍ 컨트롤
• /
• 제7권2호
• /
• pp.12-18
• /
• 2010

• 대한화학회지
• /
• 제54권2호
• /
• pp.192-197
• /
• 2010

형광체나 반도체의 소자로 사용되는 전이금속화합물 중에서 나노(nano) 크기를 가지는 스피넬 화합물을 합성하였다. 스피넬 화합물의 크기, 합성여부, 열적분석과 화합물의 특성을 확인하기 위하여 열 중량 분석기(TGA), X-선 회절 분석기(XRD), 적외선 흡수 분광기(IR)를 사용하였다. Scherrer식을 이용하여 화합물의 평균 입자 크기가 13~16 nm임을 예측할 수 있었다. 본 논문에 사용된 실험방법은 졸-겔(sol-gel)법을 사용하였으며, 소성 온도는 낮은 온도에서 진행 되었다($350^{\circ}C$). Kinetic 함수인 활성화 에너지와 전환인자를 계산하기 위해서 Kissinger방법과 Arrhenius식을 이용하여 계산하였다. $ZnCo_2O_4$와 $NiCo_2O_4$의 활성화 에너지는 163.42 kJ/mol와 147.01 kJ/mol 값을 가지는 있음을 확인하였다. 그리고 spinel 화합물들의 열역학적 함수(${\Delta}G^{\varphi}$, ${\Delta}H^{\varphi}$, ${\Delta}S^{\varphi}$)를 결정하였다.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.307-311
• /
• 2013

대기 중 $CO_2$ 포집 기술은 비점오염원 배출 $CO_2$를 포집할 수 있는 유일한 기술 중 하나이다. 본 논문에서는 저농도 $CO_2$를 이용한 흡착 실험을 수행하였다. 세 종류의 흡착제를 이용한 흡착과 열재생을 반복하는 실험을 수행한 결과 제올라이트 5A, 13X 그리고 활성탄의 $CO_2$ 흡착량은 21 mg/g, 12 mg/g 그리고 6 mg/g으로 나타났으며, 열재생 반복실험 결과에서 제올라이트 5A가 가장 우수한 흡착 성능을 보여주었다.

• 한국자동차공학회논문집
• /
• 제2권5호
• /
• pp.58-65
• /
• 1994

In order to reduce particulate emissions from diesel vehicles, mathematical model is established and analyzed on ceramic wall-flow monolith filter. A wall-flow monolith filter placed in the exhaust stream of a diesel engine can effectively limit the emission of diesel particulates through the monolith. The accumulated particulates can then be periodically combusted inside the monolith by directing hot gas to the monolith while normal engine exhaust is routed around the monolith system. The resulting low flow rates through the monolith require consideration of gas dynamics through the channels as well as particulate combustion to analyze this regeneration process. A mathematical model of the regeneration is formulated as a system of nonlinear partial differential equations describing the conservation of mass, momentum and energy. Numerical solutions are obtained by using a finite difference techniques for the spatial discretization. So we can use filter simulation program for the purpose of filter design and actual filter regeneration