• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.19-20
• /
• 2000

We have developed the 12.1" SVGA reflective type color TFT-LCD(Thin Film Transistor - Liquid Crystal Display) with the high aperture ratio and well designed reflector for the applications such as mini note PC, Note PC and electronic book. The panel shows the high reflectance(30%) and contrast ratio(20:1) resulted from optimizing the optical films and designing the embossing shaped reflector. By improving the chromacity, the color reproducibility was increased up to 20%. As removing the backlight unit, we reduced the power consumption, thickness and weight of the panel to 0.8W, 2.2mm, and 250gram, respectively. According to the above performances, we have obtained fabrication process for mass production, and furthermore, could have access to fast market launching.

• 비파괴검사학회지
• /
• 제12권1호
• /
• pp.9-15
• /
• 1992

Ultrasonic spectroscopy is likely to become a very powerful NDE method for detection of microfects and thickness measurement of thin film below the limit of ultrasonic distance resolution in the opaque materials, provides a useful information that cannot be obtained by a conventional ultrasonic measuring system. In this paper, we considered a thin film below the limit of ultrasonic distance resolution sandwitched between two substances as acoustical analysis model, demonstrated the usefulness of ultrasonic spectroscopic analysis technique using information of ultrasonic frequency for measurements of thin film thickness, regardless of interference phenomenon and phase reversion of ultrasonic waveform. By using frequency intervals(${\triangle}f$) of periodic minima from the ratio of reference power spectrum of reflective waveform obtained a sample to power spectrum of multiple reflective waves obtained interference phenomenon caused by ultrasonic waves reflected at the upper and lower surfaces of a thin layer, can measured even dimensions of interest are smaller than the ultrasonic wave length with simplicity and accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1515_1516
• /
• 2009

A 440MHz wireless and passive surface acoustic wave (SAW) based micro-sensor was developed for simultaneous measurement of temperature and humidity. The developed sensor is composed of a SAW reflective delay lines structured by an IDT (Inter-Digital Transducer), four reflectors and humidity sensitive film (polyimide). Polyimide was dry-ecthed by RIE (Reactive Ion Etching) to obtain high roughness, which gives the large reaction area resulting in high sensitivity. In wireless testing using a network analyzer, sharp reflection peaks with high S/N ratio, small signal attenuation, and few spurious peaks were observed in the time domain. High sensitivity towards the temperature and humidiy were also observed in the large concentration range. The obtained sensitivity was $16.8^{\circ}/^{\circ}C$ for temperature sensor and $15.8^{\circ}$/%RH for humidity sensor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.181-183
• /
• 2002

A new 10.4" transflective TFT-LCD has been developed using newly designed color filter for sunlight readable application. High transmittance and color gamut are realized by the dual color filter and dual cell gap structure in the ECB mode. The color gamut of new device provides 17% in transmissive and 18% in reflective mode. This new device provides the $125cd/m^2$ of luminance, 240:1 and 27:1 of contrast ratio in the transmissive and reflective mode, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.200-201
• /
• 2008

태양전지 제작 시 반사방지막(Anti-reflection Coating)이 태양전지 효율에 미치는 영향을 알아보기 위한 실험으로 최적의 가스비를 알아보기 위하여 Plasma Enhanced Chemical Vapor Deposition(PECVD)를 이용한 Silicon nitride 증착 실험이다. SiH4 가스를 45 sccm으로 고정시킨 상태에서 NH3를 25,45,60,90,135 sccm으로 가변하여 Carrier Lifetime과 Refractive index를 측정하였다. PECVD의 조건은 기판온도 $450^{\circ}C$, Chamber 압력 1 Torr, 증착두께 $1000\AA$으로 고정하였다. 증착 후 500, 600, 700, $800^{\circ}C$로 열처리를 하고나서 Carrier Lifetime을 측정하여 열처리에 대한 효과도 알아보았다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.977-979
• /
• 2007

We demonstrate a hybrid device with high ambien t-contrast-ratio (>133.8:1) under any ambient co nditions by vertically integrating a reflective LCD and a transparent OLED. The twisted nematic LC cell is placed beneath the OLED to improve dev ice transmittance by 53.8% due to the asymmet ric emission from both-sides of the transparent OLED.

• 한국전기전자재료학회논문지
• /
• 제17권2호
• /
• pp.207-211
• /
• 2004

We have performed computer simulation to obtain a globa1 optimization of power consumption and viewing angle characteristic of reflective twisted nematic (R-TN) mode liquid crystal display (LCD) with sin81e polarizer and λ/4 plate. Our studies shout that with increasing the twist angle, a steepness of reflectance-voltage curve increase, operation voltages decreases, the region where contrast ratio (CR) greater than 10 increases but the reflectance of the white state starts to decrease at above the twist angle of 75$^{\circ}$. Above the twist angle of 90$^{\circ}$, the R-TN mode LCD shows the most favorable combination of low consumption and good viewing angle characteristic.

• 한국전기전자재료학회논문지
• /
• 제22권2호
• /
• pp.169-173
• /
• 2009

We studied driving characteristics according to the ratio of mass and charging (m/q) value for charged toner particles with black and yellow color in charged particle type display panel. After biasing rectangle pulse to the transparency electrodes of putted panel with toner particles, its response time and contrast ratio are simultaneously measured using a laser as a optical source, photodiode as a detector and reflective system. As a results, contrast ratio is largest at the shortest response time region which is different to the particle because of m/q. We proposed relational equation for response time, m/q, cell gap and biasing voltage. It has not been studied and reported to analyze the relationship of response time, biasing voltage, lumping phenomena, cell gap, and contrast ratio for toner particle type display.

• 한국광학회지
• /
• 제22권1호
• /
• pp.23-29
• /
• 2011

쌍안정 카이랄 스플레이 네마틱 액정표시소자는 스플레이 상태와 $-\pi$ 꼬인 상태를 쌍안정 상태로 사용하는 메모리 액정표시소자이다. 셀 갭/피치의 값이 0.25일 경우 완전한 쌍안정 상태를 갖지만, $-\pi$ 꼬인 상태에서 스플레이 상태로 전이시키기 위하여 fringe 전계를 인가할 경우 픽셀영역은 전계의 왜곡에 의해서 완전한 스플레이 상태가 아니라 $-\pi$ 꼬인 상태를 부분적으로 유지하게 된다. 본 논문에서는 화소영역에서 두 안정한 상태가 공존하지 않는 $-\pi$ 꼬인 상태를 어두운 상태로 사용하는 반사형 쌍안정 카이랄 스플레이 네마틱 액정표시소자를 제안한다. 제작된 반사형 액정표시소자는 30:1의 고명암비를 나타냈으며, 응답속도는 수직전압 8 V, fringe 전압 12 V의 구동 전압으로 각각 쓰기 응답시간이 950 ms, 리셋 응답시간이 450 ms였다. 또한 제안된 셀은 +C 광학 보상 필름을 사용하여 좌우 방향에서 $180^{\circ}$의 광시야각을 나타냈다.

• 한국광학회지
• /
• 제20권4호
• /
• pp.217-222
• /
• 2009

본 논문에서는 고굴절률차 폴리머 도파로를 이용하여 이중 링 공진기 가감필터(Add/Drop Filter) 반사기를 설계하고 제작하였다. 이 가감필터 반사기를 반사형 반도체 광 증폭기와 하이브리드 집적함으로써 저가형 파장가변 레이저를 제작하고 그 측정결과를 분석하였다. 이중 링 공진기 반사기는 서로 다른 반경을 가진 두 개의 링 공진기로 인하여 선택적인 반사 특성을 가지게 되며, 버니어 효과로 인하여 넓은 파장가변 특성을 가질 수 있다. 반사형 반도체 광 증폭기와 능동 정렬을 통하여 제작된 하이브리드 집적 파장가변 레이저는 26 dB의 부 모드 억제율과 0.03 nm의 선폭을 가지며 단일 모드로 발진하였다. 또한 25 mA의 전류를 이중 링 공진기 가감필터 반사기 상부에 형성된 전극에 인가하여 총 17 nm의 파장가변을 측정하였으며, 파장가변 과정에서 부 모드 억제율은 일정하게 유지됨을 확인하였다.