• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.18-25
• /
• 2005

We derive refraction statics for seismic data recorded in a hard rock terrain, in which there are large and rapid variations in the depth of weathering. The statics corrections range from less than 10 ms to more than 70 ms, often over distances as short as 12 receiver intervals. This study is another demonstration of the importance in obtaining accurate initial refraction models of the weathering in hard rock terrains in which automatic residual statics may fail. We show that the statics values computed with a simple model of the weathering using the Generalized Reciprocal Method (GRM) and the Refraction Convolution Section (RCS) are comparable in accuracy to those computed with a more complex model of the weathering, using least-mean-squares inversion with the conjugate gradient algorithm (Taner et al., 1998). The differences in statics values between the GRM model and that of Taner et al. (1998) systematically vary from an average of 2ms to 4ms over a distance of 8.8 km. The differences between these two refraction models and the final statics model, which includes the automatic residual values, are generally less than 5 ms. The residuals for the GRM model are frequently less than those for the model of Taner et al. (1998). The RCS statics are picked approximately 10 ms later, but their relative accuracy is comparable to that of the GRM statics. The residual statics values show a general correlation with the refraction statics values, and they can be reduced in magnitude by using a lower average seismic velocity in the weathering. These results suggest that inaccurate average seismic velocities in the weathered layer may often be a source of short-wavelength statics, rather than any shortcomings with the inversion algorithms in determining averaged delay times from the traveltimes.

• The Journal of Korean Philosophical History
• /
• no.30
• /
• pp.283-310
• /
• 2010

This paper attempted to solve the problem of contemporary youth character education through the traditional character education. For this purpose, to revaluate the educational contents of the Chosen Dynasty with current viewpoint and investigate there is what kind of meaning in current society. In other words, tried to observe about principles and methodology of youth education which based on the human being and education theory of the Confucianism. Specially analysis led about youth education theory of the Toegye and Yulgok who represents Korean studying abroad, to suggest learning model that can apply today and propose that will be able to succeed traditional education in modern ways in future. This paper reviewed that using a traditional education model for the development of youth character education as a basic task of character education program, and proposed its three kinds of components and learning model. First, Arranged character education by 10 kinds of core concept. Second, divided character education into 4 stages - recognition, reflection, application, expansion. Then suggested based on the will, emotion and mind- each of the key concept reapplied by the 4 stages.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.153-160
• /
• 2023

The process of verifying design concepts and ideas by producing real or equivalent model is essential in the product development process. Against this background, the purpose of this study is to consider the case of developing subjects that can systematically cultivate the ability to produce model from the basic stage to a certain level or higher, focusing on design engineering majors. As a theoretical consideration for this, prior studies related to making such as modeling or prototyping in related areas and majors such as industrial design are considered, followed by Bloom's revised taxonomy model and Hioshi Ishikawa's industrial design program as a methodological consideration for curriculum development. Finally, by applying this, we propose a new course that includes a lecture plan corresponding to the 16th week of learning, which is a general semester of university education. As a result of the study, it was confirmed that producing a physical model was still essential for the development of a new design, and accordingly, it was also necessary to establish a systematic curriculum suitable for the major area. Since the scope of this study extends to the development of subjects, in subsequent studies, it is necessary to consider the contents such as verification and reflection of the utility as competency education through actual application and suggestion of improved subject design.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.4
• /
• pp.265-273
• /
• 2002

In this paper, wave absorbing characteristics of a horizontal submerged punching plate are investigated throughout the calculation and the experiment. The punching plate with the array of circular holes can force the flow to separate and to form eddies of high vorticity and cause significant energy loss. As an analytic tool, the linear water wave theory and the eigenfunction expansion method is applied. Darcy's law that the normal velocity of the fluid passing through the punching plate is linearly proportional to the pressure difference between two sides of the punching plate is assumed. The proportional constant called the porous coefficient is deeply dependent to the porosity. To obtain the relationship between the porosity and the porous coefficient the systematic model test for the punching plates with 6 different porosities is conducted at 2-dimensional wave tank. It is found that the porous coefficient is linearly proportional to the porosity(b=57.63P-0.9717). It is also noted that the optimal porosity value is near P=0.1 and the optimal range of submergence depth is $d/h\\leq0.2$ within entire frequency range.

• International Journal of Fluid Machinery and Systems
• /
• v.6 no.2
• /
• pp.75-86
• /
• 2013

The effects of acoustic resonance and volute geometry on phase resonance are studied theoretically and experimentally using a centrifugal fan. One dimensional theoretical model is developed taking account of the reflection from the discharge pipe end. It was found that the phase resonance occurs, even with the effects of acoustic resonance, when the rotational speed of rotor-stator interaction pattern agrees with the sound velocity. This was confirmed by experiments with and without a silencer at the discharge pipe exit. The pressure wave measurements showed that there are certain effects of the cross-sectional area change of the volute which is neglected in the one dimensional model. To clarify the effects of area change, experiments were carried out by using a ring volute with a constant area. It was demonstrated that the phase resonance occurs for both interaction modes travelling towards/away from the volute. The amplitude of travelling wave grows towards the volute exit for the modes rotating towards the volute exit, in the same direction as the impeller. However, a standing wave is developed in the volute for the modes rotating away from the volute exit in the opposite direction as the impeller, as a result of the interaction of a growing wave while travelling towards the tongue and a reflected wave away from the tongue.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.288-293
• /
• 2008

The standard prestressed concrete I-girder bridge (PSC I-girder bridge) is one of the most prevalent types for small and medium bridges in Korea. When determining the member forces in a section to assess the safety of girder in this type of bridge, the general practice is to use the simplified practical equations or the live load distribution factors proposed in design standards rather than the precise analysis through the finite element method or so. Meanwhile, the live load distribution factors currently used in Korean design practice are just a reflection of overseas research results or design standards without alterations. Therefore, it is necessary to develop an equation of the live load distribution factors fit for the design conditions of Korea, considering the standardized section of standard PSC I-girder bridges and the design strength of concrete. In this study, to develop an equation of the live load distribution factors, a parametric analysis and sensitivity analysis were carried out on the parameters such as width of bridge, span length, girder spacing, width of traffic lane, etc. Then, an equation of live load distribution factors was developed through the multiple linear regression analysis on the results of parametric analysis. When the actual practice engineers design a bridge with the equation of live load distribution factors developed here, they will determine the design of member forces ensuring the appropriate safety rate more easily. Moreover, in the preliminary design, this model is expected to save much time for the repetitive design to improve the structural efficiency of PSC I-girder bridges.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.6
• /
• pp.27-40
• /
• 2016

Conventional warning criteria for landslides due to rainfall in broad regions have limitations, because they did not have proper reflection of topography, forest physiognomy, and unsaturated soil properties, et al. This study suggested a new stability model for unsaturated slope analyses during rainfall, considering rainfall pattern, geomorphological characteristics (slope angle, soil depth), engineering properties of unsaturated soils, and tree surcharge and root reinforcement. Stability analysis not considering root reinforcement and tree surcharge tends to over-predict a factor of safety in unsaturated slopes. Developed slope stability model was used to build database on the factor of safety in unsaturated slopes during rainfall, and it was integrated with GIS to do quantitative risk analysis in landslide risk areas specified in Ulju. Landslide risk areas were located at downstream of the point with sudden drop in safety factor, as well as at regions with low safety factor during rainfall.

• Journal of the HCI Society of Korea
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2018

The rapid increase of Sinlge-person household and the increase in the use of smart devices necessitate the context analysis of Sinlge-person household and specific design direction for Sinlge-person household products. Previous studies have analyzed the overall context of smart devices without distinguishing between Sinlge-person household and a household. However, since the number of family members, age distribution, and residential space are different in the case of Sinlge-person household, it is necessary to analyze the different behaviors of smart devices. Therefore, this study limits the use environment of smart device of Single-person household to the scope of investigation, and based on the theoretical background, defines the existing comprehensive context based on user's situation that lasts for a certain interval. For the concrete and empirical research results, Consolidated Flow Model was constructed through Contextual Task through user research. This shows the interaction characteristics such as the guarantee of physical space, efficiency, lifestyle reflection, and safety assurance of Single-person household.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.3
• /
• pp.199-205
• /
• 2012

In this study, wave transformation by damping due to the permeable bed of finite depth is investigated. The relationship between wave damping rate and relative water depth are presented. The damping rate is used in the eigenfunction expansion method to calculate the wave dissipation over the permeable bed. For a permeable shoal, the eigenfunction expansion model result is compared with that of the integral equation method to show good agreement. The model is also used to examine the wave reflection over the permeable planar slope of various frequency. It has been found that in general relatively short waves are more influenced by the permeability of the permeable seabed than relatively long waves unless the water depth is so large that the influence of permeable bed on surface water waves disappears.

• Journal of Korean Society of Transportation
• /
• v.22 no.1 s.72
• /
• pp.19-30
• /
• 2004

Once baggage demand of passengers is forecast, BHS requirements must be analyzed, i.e., the number of originating/transferring/terminating bags to be handled, the number of conveyor lines to be installed, the number of containers for baggage make-up, the number of claim devices for baggage claim, and so on. Therefore, the determination of the baggage traffic volume is one of the most important analysis components for the airport design. Accordingly, this research proposes time-based distribution table models in order to accurately estimate BHS requirements to obtain design criteria in airport design phase. As the BHS requirements are ascertained, related requirements of the facilities can be determined by applying actual specifications of devices, i.e., throughput. This research found that the proposed mathematical model gives a good reflection of IIA (Incheon International Airport)'s operational condition. That means the model provides apparent reliability and feasibility. Furthermore, the specifications of devices are the newest figures. This fact supports that the research provides more effcient and reliable results.